Making lathe milling attachment on a mill
HF does not carry milling bits. And, if they did, I doubt they'd be very
good (my rule, as a long and loyal HF customer is, never buy anything with an edge on it; it won't have one for long...). MSC sells good quality bits at good prices with fairly fast delivery. Jerry "Ignoramus32621" wrote in message ... I would really like to make a milling attachment for my lathe, using my mill. I am in search of tips and pointers. I am going to check if HF sells milling bits etc. I will try to do something this weekend. i -- |
"Ignoramus32621" wrote in message
... I would really like to make a milling attachment for my lathe, using my mill. Am I missing something here? Or are you just looking for a doodle project? In which case, I'd look at the Gingery series, basically take a slab of CRS, bolt it to a flat plane, square (more or less) to the other slides, mount a carriage and leadscrew on it with table for the work and you're done. Tim -- "California is the breakfast state: fruits, nuts and flakes." Website: http://webpages.charter.net/dawill/tmoranwms |
Jerry Foster wrote:
HF does not carry milling bits. And, if they did, I doubt they'd be very good (my rule, as a long and loyal HF customer is, never buy anything with an edge on it; ...or an electrical plug ;) it won't have one for long...). |
Jerry Foster wrote:
HF does not carry milling bits. And, if they did, I doubt they'd be very good (my rule, as a long and loyal HF customer is, never buy anything with an edge on it; it won't have one for long...). MSC sells good quality bits at good prices with fairly fast delivery. Jerry "Ignoramus32621" wrote in message ... I would really like to make a milling attachment for my lathe, using my mill. I am in search of tips and pointers. I am going to check if HF sells milling bits etc. I will try to do something this weekend. i -- Every HF store I've been in carries sets of common end-milling cutters. Many are TiN plated (big deal ... NOT!). But I agree that their quality is highly suspect at best. Dan Mitchell ============ |
On Fri, 22 Apr 2005 00:16:16 -0500, "Tim Williams"
wrote: "Ignoramus32621" wrote in message ... I would really like to make a milling attachment for my lathe, using my mill. Am I missing something here? Or are you just looking for a doodle project? In which case, I'd look at the Gingery series, basically take a slab of CRS, bolt it to a flat plane, square (more or less) to the other slides, mount a carriage and leadscrew on it with table for the work and you're done. Tim He wants to get rid of his new minty Clausing mill. So he has to make a flimsy and flexible, not particularly good for much. milling attachment to replace it. :/ Gunner Rule #35 "That which does not kill you, has made a huge tactical error" |
In article ,
Ignoramus32621 wrote: I would really like to make a milling attachment for my lathe, using my mill. I am in search of tips and pointers. I am going to check if HF sells milling bits etc. I will try to do something this weekend. i -- I've been taking a machine shop class this semester and I got to do learning on both a real mill and a milling attachment on a lathe. The attachment was absolutely infuriating--the worst part about it was that I couldn't lock the carriage so sometimes while cutting it would push (or worse, pull!) the piece, carriage, milling setup. Wound up giving up on the thing once it shifted, snapped off a mill and did all it could to lodge it into my forehead. POINTER: If you go through with this, make sure to also rig up some sort of locking system. Or shields. And get a ton of practice on your mill while you have it so you know what's going wrong when your attachment starts misbehaving. TIP: Might spend time building a shed to house the mill instead of making a substitute. Probably cost you less, work better, and be safer in the long run. -- B.B. --I am not a goat! thegoat4 at airmail dot net http://web2.airmail.net/thegoat4/ |
On Fri, 22 Apr 2005 00:16:16 -0500, Tim Williams wrote:
"Ignoramus32621" wrote in message ... I would really like to make a milling attachment for my lathe, using my mill. Am I missing something here? Or are you just looking for a doodle project? That's my guess, or he wants to sell the mill later maybe? Nothing wrong with doodle projects though. You know, "I'm building a tool holder to hold the tools that I need to make a tool holder with" kind of things. |
All times are GMT +1. The time now is 05:16 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter