milling attachment for sale
I have a Palmgren milling attachment,Model 250 ( also sometimes
called a "vertical slide") in excellent condition for sale. It looks like a vise mounted on a z-axis track and can be adjusted vertically to .001" to place your work piece at the correct position for milling on the lathe. It fits a 9 to 12 inch lathe. Only used a few times on my SB10K lathe before I got a mill/drill. I would like to get $130. US for it. If interested, email me at pmerriam "at" accesscable.net and I can send you some photos. I am located in Nova Scotia, Canada. |
"Peter Merriam" wrote in message
news:WHQ6e.29888$jR3.23068@edtnps84... I have a Palmgren milling attachment,Model 250 ( also sometimes called a "vertical slide") in excellent condition for sale. It looks like a vise mounted on a z-axis track and can be adjusted vertically to .001" to place your work piece at the correct position for milling on the lathe. It fits a 9 to 12 inch lathe. Don't sell it if you don't need the money. 1. When I only had one milling machine, I had to make some adapters to mount a new motor ... needed a mill to fix a mill... my vertical slide came in really handy. 2. There have been several occassions where I used the vertical slide as a tool post or as a work holder in the lathe. Now, with a horizontal and vertical mill and a drill press with an XY table .. I still won't give up my vertical slide.. you just never know when you'll want that third degree of freedom. Boris -- ------------------------------------- Boris Beizer Ph.D. Seminars and Consulting 1232 Glenbrook Road on Software Testing and Huntingdon Valley, PA 19006 Quality Assurance TEL: 215-572-5580 FAX: 215-886-0144 Email bsquare "at" sprintmail.com ------------------------------------------ |
All times are GMT +1. The time now is 02:28 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter