interior painting tips???
 

All you dyi'ers, I want to bounce this off ya!

I need to paint a few rooms and I have come to the following conclusions on
the easiest way to paint a rooms or anything interior, only because I have
not had the greatest success in the "top to bottom method"

Now, the conventional wisdom say do the ceiling, the walls and then
baseboards or...paint from the top down....my problem with that is I can
never get a sharp straight paint job where the celing and walls meet. and I
dont want to disassemble the room or the baseboards...etc

So...

Assuming a normal track home bedroom....10 by 12 or 30 by 50...whatever, and
assuming you have *smooth* walls, I think the following works best in ease
and best paint job....

1- obviously prep all the surfaces to fill in holes etc. and use good
quality brushes of the proper width etc....

2 remove all hardware from the wall and patch where necessary.

3-paint the walls top to bottom....up to the ceiling and down to the
baseboards.....

Note...now most would say...NO...do the ceiling first...

4- allow the paint to dry (one day)
5- tape the walls for the ceiling....and tape the walls at the doors and
baseboards. Here is where care is critical for those sharp seams...so take
your time to apply the painters tape...and use only painters tape....4 inch
wide. and get it on straight and true.....

6-Paint the ceiling....don't get carried away so as to splash the paint on
the walls which would ruin your wall paint job....

7- for the baseboards, gather some kraft paper and squeze it between the
floor and baseboard
8 now your can paint the baseboard knowing that the lines will be straight
and true.

so...whats wrong with this method?

Mango

Whats wrong , it is to time consuming. Paint the ceiling then learn to
cut in, maybe a paint pad will work, but I never used one, get a good
quality brush cutting in will be easy. Or just paint it all one color.

*Prep all surfaces (including removal of hardware and degreasing wash, etc)
*Paint ceiling and wait till dry
*Put masking tape on ceiling area where you would
like the wall paint to end.
*Paint the edge of tape with ceiling color. (let dry)
*Paint the walls/dry
*score tape edge and remove.

Any seep under on the tape will be of the ceiling color.
The paint seeps under and creates a better seal for the tape.

(according to a trading spaces episode anyway... ;)

--
be safe.
flip
Ich habe keine Ahnung was das bedeutet, oder vielleicht doch?
Remove origin of the word spam from address to reply (leave "+")

I would first practice cutting in and getting a smooth line. And you'd
need a good brush -- I haven't been impressed by the brushes I've seen
at HD or Lowe's. My favorite is the Porter paint line. If you don't
have a Porter in your area, check out some brushes at MAB or
Sherwin-Williams.

You're way is more time consuming and, by the way, painted baseboards
[and casings] are typically caulked to the wall. Honestly, I've never
seen it not caulked.

If you're intent on masking, why don't you mask the ceiling instead of
the wall? Textured ceilings? I think you'll need the wait more than a
day -- just because the paint is dry doesn't mean it's cured. Also,
You'll need blue tape [or one of those other colors that won't pull off
fresh paint]. AND, whatever you use, make sure you get flat tape.
Regular masking tape has a texture to it, and will allow seepage unless
you use something flat and hard -- like a putty kife -- to flatten it
against the surface. Or use flat tape.

Conventional wisdom is conventional for a reason, although I do things
in this order---
1. Ceiling [so you don't rain down on everything else you've done]
2. Casings [window and door trim] [cutting in the walls against the
casings is easier than vice versa.
3. Walls
4. Baseboard