DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Waterproofing addition foundation (https://www.diybanter.com/home-repair/92493-waterproofing-addition-foundation.html)

Sasha February 23rd 05 05:14 PM

Waterproofing addition foundation
 
I am going to build an addition with most likely full basement
foundation made from cinder blocks. What's the best way to waterproof
the foundation. My home basement foundation is also built from cinder
blocks with no waterproofing as far as I know. I usually do not have
any leaks as long as gutters are cleaned. However I want to make
maximum effort to ensue the finished basement under addition will be
maximum waterproof. I read that many advanced waterproofing and
damproofing technique require specialized equipment and must be
performed by trained personnel. They are also quit expensive. What's
the best waterproofing method besides obvious pipe drainage that I can
safely and effectively do myself?


Art February 23rd 05 06:31 PM

The french drain and correct grading of the land is the most important part.
The tar like damp proofing really just stops moisture, not water. Search
this group using the group page of www.google.com and look up basements,
waterproofing and french drains and you will find everything you need.
Basically you need perforated drainage tile, a sock to go around it, tons of
gravel and special fabric to surround the whole thing so mud doesn't mix in
with gravel. Then you use one of the many tar like waterproofing substances
for the walls although like I said they really don't waterproof anything.


"Sasha" wrote in message
oups.com...
I am going to build an addition with most likely full basement
foundation made from cinder blocks. What's the best way to waterproof
the foundation. My home basement foundation is also built from cinder
blocks with no waterproofing as far as I know. I usually do not have
any leaks as long as gutters are cleaned. However I want to make
maximum effort to ensue the finished basement under addition will be
maximum waterproof. I read that many advanced waterproofing and
damproofing technique require specialized equipment and must be
performed by trained personnel. They are also quit expensive. What's
the best waterproofing method besides obvious pipe drainage that I can
safely and effectively do myself?




Goedjn February 23rd 05 07:15 PM


I am going to build an addition with most likely full basement
foundation made from cinder blocks. What's the best way to waterproof
the foundation. My home basement foundation is also built from cinder
blocks with no waterproofing as far as I know. I usually do not have
any leaks as long as gutters are cleaned. However I want to make
maximum effort to ensue the finished basement under addition will be


Drain tile around the base of the foundation, leading someplace where
the water can go. Parging on the outer surface of the wall, then
a tar-based sealant, up to grade, and something that isn't black
from there up. Grade away from the foundation, and lead
the downspouts away.

Sasha February 23rd 05 10:08 PM

What's the tar-based sealant you are talking about? While I understand
the french drain is important and I am going to provide one I still
want to ensure that water won't sip through porous cinder block walls.
So I need to coat or cover it with some waterproofing coat. I know
there are specific waterproofing resin coats that are sprayed on the
walls and prevent water from sipping through. Different products
withstand different hydrostatic pressure. Unfortunately, all of these
products are expensive as they require certified specialist to apply. I
am looking for the best and affordable solution that I can apply
myself. It may not be as effective as specialized coatings but combined
with french drain and proper grading can provide maximum waterproofing
I can achieve by doing things myself.


Matt February 23rd 05 10:36 PM

I think Sasha is a pretty name.


Doc February 23rd 05 11:01 PM


"Matt" wrote in message
I think Sasha is a pretty name.



Sasha is a guy, ewwwwwww Matt.

Matt February 24th 05 12:37 AM

Well, he does have a cute ass.


Matt February 24th 05 12:38 AM

Well, he does have a cute ass.


DanG February 24th 05 02:37 AM

look up damp proofing emulsions


Walls can be coated with bituminous (asphalt) emulsions, coal tar
emulsions, and rubber based emulsions. I would certainly add
reinforcing mesh to the system. There are other more expensive
systems that use sheets of material and/or drainage mats.

http://www.koppers.com/htm/PandS_Roof_WaterP.html

http://www.colbond-geosynthetics.com.../drainage.html

http://www.tamko.com/waterproofing/tw60/default.htm

(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)




"Sasha" wrote in message
oups.com...
What's the tar-based sealant you are talking about? While I
understand
the french drain is important and I am going to provide one I
still
want to ensure that water won't sip through porous cinder block
walls.
So I need to coat or cover it with some waterproofing coat. I
know
there are specific waterproofing resin coats that are sprayed on
the
walls and prevent water from sipping through. Different products
withstand different hydrostatic pressure. Unfortunately, all of
these
products are expensive as they require certified specialist to
apply. I
am looking for the best and affordable solution that I can apply
myself. It may not be as effective as specialized coatings but
combined
with french drain and proper grading can provide maximum
waterproofing
I can achieve by doing things myself.




rnr_construction February 24th 05 05:09 AM


"Sasha" wrote in message
oups.com...
What's the tar-based sealant you are talking about? While I understand
the french drain is important and I am going to provide one I still
want to ensure that water won't sip through porous cinder block walls.
So I need to coat or cover it with some waterproofing coat. I know
there are specific waterproofing resin coats that are sprayed on the
walls and prevent water from sipping through. Different products
withstand different hydrostatic pressure. Unfortunately, all of these
products are expensive as they require certified specialist to apply. I
am looking for the best and affordable solution that I can apply
myself. It may not be as effective as specialized coatings but combined
with french drain and proper grading can provide maximum waterproofing
I can achieve by doing things myself.


your lumber yard building center will have this
a asphault emulsion in 5 gallon buckets . roll it on with a regular paint
roller and use a long wooden handel.
be carefull that **** leaps right off the roller and goops ya every
time : )



Ed February 24th 05 06:23 AM


"Matt" wrote

Well, he does have a cute ass.


More helpful suggestions?



Alexander Galkin February 24th 05 02:27 PM

Thank you for the information. Can any of these coatings be safely applied
by an average homeowner without any specialized equipment?


"DanG" wrote in message
news:z5bTd.25937$Zr.15119@okepread03...
look up damp proofing emulsions


Walls can be coated with bituminous (asphalt) emulsions, coal tar
emulsions, and rubber based emulsions. I would certainly add reinforcing
mesh to the system. There are other more expensive systems that use
sheets of material and/or drainage mats.

http://www.koppers.com/htm/PandS_Roof_WaterP.html

http://www.colbond-geosynthetics.com.../drainage.html

http://www.tamko.com/waterproofing/tw60/default.htm

(top posted for your convenience)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)




"Sasha" wrote in message
oups.com...
What's the tar-based sealant you are talking about? While I understand
the french drain is important and I am going to provide one I still
want to ensure that water won't sip through porous cinder block walls.
So I need to coat or cover it with some waterproofing coat. I know
there are specific waterproofing resin coats that are sprayed on the
walls and prevent water from sipping through. Different products
withstand different hydrostatic pressure. Unfortunately, all of these
products are expensive as they require certified specialist to apply. I
am looking for the best and affordable solution that I can apply
myself. It may not be as effective as specialized coatings but combined
with french drain and proper grading can provide maximum waterproofing
I can achieve by doing things myself.






Goedjn February 24th 05 04:36 PM



your lumber yard building center will have this
a asphault emulsion in 5 gallon buckets . roll it on with a regular paint
roller and use a long wooden handel.
be carefull that **** leaps right off the roller and goops ya every
time : )


Being careful won't help. Wear clothes that you expect
to ruin, and cover your hair.




All times are GMT +1. The time now is 06:48 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter