Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
patio door threshold issue
I recently had a Renewal by Anderson contractor (The Window Place) install a
rather expensive ($3,500) pair of exterior French doors that open to a screened-in porch. They are a really beautiful set of well-made doors, but I complained about the door threshold that rises 2-1/2 inches above the interior flooring and that I'm afraid presents a tripping hazard. Residential code appears to require a threshold rise of no more than 1-1/2 inches. Anderson has only offered to build up the external part of the threshold using a a 2x10 to provide a flat place to step when passing through the doors (the current threshold solution is rather uneven). The real fix in my opinion is to lower the threshold by modifying the metal plate and door seal and lowering the door/frame. Not a easy fix! My question is: is it reasonable to ask Anderson to lower the threshold and door frame or is there another way? -- Gary Roan |
#2
|
|||
|
|||
Sounds like they should have removed a strip of flooring before
installation. Of course they probably did not measure to take that into account and the custom door you have is too short. If they did not get permits, I would make some unofficial calls to the inspectors office without giving your name and find out what kind of inspections if any should have been done. I would also try to find installation instructions and if you were home, try to remember if they followed the instructions correctly. CHeck Andersen's web site or call them for installation instructions for your door. Then call and write Andersen and tell them that the installation was defective, the door mis-sized and it is their problem, not yours. Get ready for small claims court. If you put it on a credit card inform the credit card company that they installed the wrong size door. Credit companies cannot resolve quality and installations issues but they can resolve wrong size merchandise issues by charging them back. "Gary Roan" wrote in message ... I recently had a Renewal by Anderson contractor (The Window Place) install a rather expensive ($3,500) pair of exterior French doors that open to a screened-in porch. They are a really beautiful set of well-made doors, but I complained about the door threshold that rises 2-1/2 inches above the interior flooring and that I'm afraid presents a tripping hazard. Residential code appears to require a threshold rise of no more than 1-1/2 inches. Anderson has only offered to build up the external part of the threshold using a a 2x10 to provide a flat place to step when passing through the doors (the current threshold solution is rather uneven). The real fix in my opinion is to lower the threshold by modifying the metal plate and door seal and lowering the door/frame. Not a easy fix! My question is: is it reasonable to ask Anderson to lower the threshold and door frame or is there another way? -- Gary Roan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT Guns more Guns | Metalworking | |||
Pinning new patio to existing foundation | Home Repair | |||
OT Environmentalists may be in deep Kimchee | Metalworking | |||
Bricks above Patio door | UK diy | |||
flagstone patio next to house - plastic under it or not? | Home Repair |