DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   dry wall question? (https://www.diybanter.com/home-repair/80622-dry-wall-question.html)

Joe B. December 8th 04 07:15 PM

dry wall question?
 
What does it run to have sheetrock put in a room with tape, bed and texture?
In Texas? Thanks.

Joe



Joe Fabeitz December 8th 04 08:30 PM

About $500.00

"Joe B." wrote in message
...
What does it run to have sheetrock put in a room with tape, bed and

texture?
In Texas? Thanks.

Joe





R.Smyth December 9th 04 02:51 AM

I assume since you are in Texas then room is huge. So probably at least a
million dollars.

"Joe Fabeitz" wrote in message
. ..
About $500.00

"Joe B." wrote in message
...
What does it run to have sheetrock put in a room with tape, bed and

texture?
In Texas? Thanks.

Joe







effi December 9th 04 04:06 AM

"Joe B." wrote in message
...
What does it run to have sheetrock put in a room with tape, bed and
texture?
In Texas? Thanks.

Joe


did you want it installed also?

or just put in the room?



Joe B. December 9th 04 06:48 PM

Lot of jokesters in here huh? :)

Joe

"effi" wrote in message
...
"Joe B." wrote in message
...
What does it run to have sheetrock put in a room with tape, bed and
texture?
In Texas? Thanks.

Joe


did you want it installed also?

or just put in the room?





willshak December 9th 04 08:26 PM

On 12/9/2004 1:48 PM US(ET), Joe B. took fingers to keys, and typed the
following:

Lot of jokesters in here huh? :)


Yup. And they are from all over the US and the rest of the world, where
the cost of construction and labor is different from one place to another.
Perhaps, if someone here was from the same location where you are, and
they had some work done, they might be able to give you a reasonable
price, but then you have to consider the amount of work they had done as
compared to yours, and the specific contractor's prices. Some charge
more or less than others. The rate is usually based upon the square
footage of the drywall to be installed, which includes the price of the
materials, the installation, and the finishing of the drywall (which
usually is a 3 day task). So, the first thing you might do is estimate
how much square footage you will be installing and then call around to
local 'rockers' and ask how much they charge.

Joe

"effi" wrote in message
...


"Joe B." wrote in message
...


What does it run to have sheetrock put in a room with tape, bed and
texture?
In Texas? Thanks.

Joe


did you want it installed also?

or just put in the room?









Punch December 9th 04 11:59 PM


"Joe B." wrote in message
...
Lot of jokesters in here huh? :)


well joe, go read your original question, are we supposed to read your mind
on the size of the room? is the ceiling to be done? who did the framing?

these things we need to know, I knew a guy who charged $20/sheet, to
install, tape, sand ( your sheets)



effi December 10th 04 01:35 AM

you are not being specific enough in any of your posts in this thread so far
to elicit a lucid answer to a question

if you don't understand this, call any drywall company in the local phone
book with your exact question posed here

then, once you have completed your homework, post all the answers here,
we'll see who the "jokester" is (some of us already know)


"Joe B." wrote in message
...
Lot of jokesters in here huh? :)

Joe

"effi" wrote in message
...
"Joe B." wrote in message
...
What does it run to have sheetrock put in a room with tape, bed and
texture?
In Texas? Thanks.

Joe


did you want it installed also?

or just put in the room?








All times are GMT +1. The time now is 09:57 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter