DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Help -gurgling noise, slight backflow from first floor tub. (https://www.diybanter.com/home-repair/79087-help-gurgling-noise-slight-backflow-first-floor-tub.html)

Tony Wesztergom November 28th 04 05:38 PM

Help -gurgling noise, slight backflow from first floor tub.
 
Looking for some plumbing help here. Our house has 2 full baths which
share the same common line. We use the second floor tub/shower, but
not the first floor. Over the last few days we've noticed that the
first floor tub makes "gurgling" sounds and has a slight backflow into
the tub while someone is taking a shower on the 2nd floor. The
drainage in the second floor tub is ok, but there can still be some
pooling while taking a shower. I have cleaned out and built up hair,
and have also plunged the tub, which helped drainage for a few days.

Is there anything I should or can check to see where the problem is,
or should I contact a plumber?

Speedy Jim November 28th 04 06:07 PM

Tony Wesztergom wrote:

Looking for some plumbing help here. Our house has 2 full baths which
share the same common line. We use the second floor tub/shower, but
not the first floor. Over the last few days we've noticed that the
first floor tub makes "gurgling" sounds and has a slight backflow into
the tub while someone is taking a shower on the 2nd floor. The
drainage in the second floor tub is ok, but there can still be some
pooling while taking a shower. I have cleaned out and built up hair,
and have also plunged the tub, which helped drainage for a few days.

Is there anything I should or can check to see where the problem is,
or should I contact a plumber?


Since it sounds like flushing a toilet doesn't affect it, the problem is
not in the Main line to the street or septic (or in the main stack).

Plunging the tub may not be effective enough. If the clog is past
where the shower joins the line for the tub, plunging will likely just
send air up the vent.

Someone will have to make a guess about the piping layout and use
a small snake to clear it. I'd hesitate to diagnose it any further
than that over the 'Net.

Jim


All times are GMT +1. The time now is 08:36 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter