Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 21st 04, 05:20 AM
Tom Reichert
 
Posts: n/a
Default Anyone have experience with Air krete?

I want to insulate my home, and am concerned about the various
blown-in insulations and the potential for moisture problems.
Apparently one can use polyurethane or Icynene foam and avoid the use
of air or moisture barriers, but what about with air krete?

I am interested in Air krete because it cannot burn, and unlike other
foams, has no noxious chemicals whatsoever. Any consumers with
experience using air krete? Any remodeling contractors who have seen
air krete in houses?

(sorry, I am a newbie; I meant to post this message only once to two
different groups instead of twice, once to each group).

  #2   Report Post  
Old November 21st 04, 02:06 PM
ADC
 
Posts: n/a
Default

No experience with it, but i have read about it and really like what the
results showed. If I could find a vendor in my area (DFW, TX), I would have
it blown in my old house as a retrofit.
"Tom Reichert" wrote in message
om...
I want to insulate my home, and am concerned about the various
blown-in insulations and the potential for moisture problems.
Apparently one can use polyurethane or Icynene foam and avoid the use
of air or moisture barriers, but what about with air krete?

I am interested in Air krete because it cannot burn, and unlike other
foams, has no noxious chemicals whatsoever. Any consumers with
experience using air krete? Any remodeling contractors who have seen
air krete in houses?

(sorry, I am a newbie; I meant to post this message only once to two
different groups instead of twice, once to each group).





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Madrone (madrona) experience? Bob Darrah Woodturning 4 May 25th 04 05:47 AM
HF 34706 lathe Dominic Palazzola Woodturning 56 March 8th 04 11:21 AM
Experience w/ Grizzly products? Sammy Woodworking 18 October 7th 03 12:25 PM
Experience with Incra Ultra KR & CA Hunter Woodworking 3 September 26th 03 03:06 PM
Any experience of "Plug-in Pest-Free"? Richard J. UK diy 5 July 31st 03 03:32 AM


All times are GMT +1. The time now is 12:58 AM.

Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017