CathyLee:
C I have plywood cupboards, which I have sanded, primed/sealed, and would
C like to add a shaker style trim, about 3/8" thick and 3" wide, and
C paintable.
C
C I asked at the building supply and their only suggestion was to use 1/4"
C birch ply good one side.
C
C Do you have another suggestion that I could ask for at the next store I
C go to?
I would think a veneer would be better. Adding a quarter-inch to the
cabinets seems like quite a bit!
C Is there a specific placement for the wooden knob I am going to add or
C can I stick them anywhere?
Wherever you think they look best! :) The closer to the hinge side
of the door the more difficult it will be to open the door. I presume
you are doing the entire kitchem; be sure to be consistent with the
knob placement. All of the upper cabinets (above the counter) have
their handles on the side opposite the hinges, a couple of inches from
the bottom of the door. All of the lower cabinets have the handles on
the top. The drawers have the handles centered.
-
¯ barry.martinþATþthesafebbs.zeppole.com ®
* State Motto: Idaho: More Than Just Potatoes
---
þ RoseReader 2.52á P003186
þ The Safe BBS þ Bettendorf, IA 563-359-1971
---
þ RIMEGate(tm)/RGXMod V1.13 at BBSWORLD *
