Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
bheider
 
Posts: n/a
Default receptacle not working

One receptacle in the living room is not receiving power. All of the others
on the same circuit are fine. Circuit breakers are fine. The re-set on the
kitchen and bathroom wall receptacles are fine. I have never had power off
on only one receptable. What could it be? Thanks.


  #2   Report Post  
MUADIB®
 
Posts: n/a
Default

Turn on the switch that controls that particular outlet.
It is very common for one or more outlets to be controlled by a wall
switch. Especially if there is no overhead lighting supplied in the
room.

That's my best guess anyway.

Your mileage may vary.




Remove "YOURPANTIES" to reply

MUADIB®

http://www.angelfire.com/retro/sster...IN%20PAGE.html

one small step for man,.....
One giant leap for attorneys.
  #3   Report Post  
Jmagerl
 
Posts: n/a
Default

Don't laugh. It happened to me. I had a outlet go out. It was working and
then just went dead. Turned out the hot wire was open. The wire looked
perfectly fine from the outside but was broken on the inside which, due to
expansion, opened up about 6 months after moving in. Took awhile to trouble
shoot because you just don't think of wire as going bad.

"bheider" wrote in message
...
One receptacle in the living room is not receiving power. All of the
others
on the same circuit are fine. Circuit breakers are fine. The re-set on
the
kitchen and bathroom wall receptacles are fine. I have never had power
off
on only one receptable. What could it be? Thanks.




  #4   Report Post  
jch
 
Posts: n/a
Default

"bheider" wrote in message
...
One receptacle in the living room is not receiving power. All of the
others
on the same circuit are fine. Circuit breakers are fine. The re-set on
the
kitchen and bathroom wall receptacles are fine. I have never had power
off
on only one receptable. What could it be? Thanks.


Turn the power off to that outlet. Take the outlet cover off, unscrew the
outlet and pull it out. Examine the wires and make sure one hasn't broken
off. It's also not uncommon for wires to be attached to the spring loaded
contacts on an outlet. Frequently these will fail. In this case re-attach
using the screw terminals.


  #5   Report Post  
bheider
 
Posts: n/a
Default

Thank you so much -- saved me a call to an electrician. Feel pretty silly
but very appreciative of the help.
"MUADIB®" wrote in message
...
Turn on the switch that controls that particular outlet.
It is very common for one or more outlets to be controlled by a wall
switch. Especially if there is no overhead lighting supplied in the
room.

That's my best guess anyway.

Your mileage may vary.




Remove "YOURPANTIES" to reply

MUADIB®

http://www.angelfire.com/retro/sster...IN%20PAGE.html

one small step for man,.....
One giant leap for attorneys.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Metal working / engine building forum Russ Wizinsky Metalworking 0 June 12th 04 03:38 AM
RCD trips while working on dead circuit Bob Mannix UK diy 4 September 9th 03 09:31 AM
Making a ruin into something habitable. Liz UK diy 140 August 12th 03 12:03 PM
Gas Weedeater not working when tank is on bottom (correct cutting position) Patch Home Repair 0 July 2nd 03 07:42 PM


All times are GMT +1. The time now is 03:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"