|
Plywood cutting time saver
If you have more than one sheet of plywood to cut, this tip saves time
https://imgur.com/gallery/9Bz6KYk |
Plywood cutting time saver
On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote:
If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. |
Plywood cutting time saver
On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce
wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? It doesn't take a lot to impress you. |
Plywood cutting time saver
On 5/20/21 12:16 AM, Ed Pawlowski wrote:
If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk These days, I bet that stack of plywood costs more than his brand new pickup... -- With all the €śgun control€ť talk, I havent heard one politician say how they plan to take guns away from criminals and terrorists€” just from law abiding citizens... |
Plywood cutting time saver
On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski posted for all of us to digest... If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk Oh no, the rip guide is an 1? off :( -- Tekkie |
Plywood cutting time saver
On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce
wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. This is just a big skill saw with a nicer rip fence. |
Plywood cutting time saver
On Thu, 20 May 2021 20:34:13 -0400, wrote:
On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 |
Plywood cutting time saver
On Thu, 20 May 2021 22:53:07 -0500, Jim Joyce
wrote: On Thu, 20 May 2021 20:34:13 -0400, wrote: On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 Even more reason to wonder why you were so amazed. |
Plywood cutting time saver
On Fri, 21 May 2021 02:07:21 -0400, wrote:
On Thu, 20 May 2021 22:53:07 -0500, Jim Joyce wrote: On Thu, 20 May 2021 20:34:13 -0400, wrote: On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 Even more reason to wonder why you were so amazed. I'm even more amazed that you didn't know the difference between a skil saw and a table saw. |
Plywood cutting time saver
On Fri, 21 May 2021 01:28:58 -0500, Jim Joyce
wrote: On Fri, 21 May 2021 02:07:21 -0400, wrote: On Thu, 20 May 2021 22:53:07 -0500, Jim Joyce wrote: On Thu, 20 May 2021 20:34:13 -0400, wrote: On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 Even more reason to wonder why you were so amazed. I'm even more amazed that you didn't know the difference between a skil saw and a table saw. Once you pick it up and turn it over, the only distinction is size. |
Plywood cutting time saver
On Sat, 22 May 2021 20:59:14 -0400, wrote:
On Fri, 21 May 2021 01:28:58 -0500, Jim Joyce wrote: On Fri, 21 May 2021 02:07:21 -0400, wrote: On Thu, 20 May 2021 22:53:07 -0500, Jim Joyce wrote: On Thu, 20 May 2021 20:34:13 -0400, wrote: On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 Even more reason to wonder why you were so amazed. I'm even more amazed that you didn't know the difference between a skil saw and a table saw. Once you pick it up and turn it over, the only distinction is size. And safety features. (who calls circular saws "Skil saws" anymore?) |
Plywood cutting time saver
On Sat, 22 May 2021 23:58:36 -0400, wrote:
On Sat, 22 May 2021 20:59:14 -0400, wrote: On Fri, 21 May 2021 01:28:58 -0500, Jim Joyce wrote: On Fri, 21 May 2021 02:07:21 -0400, wrote: On Thu, 20 May 2021 22:53:07 -0500, Jim Joyce wrote: On Thu, 20 May 2021 20:34:13 -0400, wrote: On Thu, 20 May 2021 14:38:37 -0500, Jim Joyce wrote: On Thu, 20 May 2021 02:08:33 -0400, wrote: On Thu, 20 May 2021 00:53:04 -0500, Jim Joyce wrote: On Thu, 20 May 2021 00:16:34 -0400, Ed Pawlowski wrote: If you have more than one sheet of plywood to cut, this tip saves time https://imgur.com/gallery/9Bz6KYk That's genius. A 14" circular saw with a fence? No, a 10" jobsite table saw, AKA contractor's saw, inverted, with a fence. It doesn't take a lot to impress you. Have you ever tried to cut a full sheet of material on a jobsite saw? It's neither easy nor safe. He made it relatively easy and much safer. If you look at the kerf, it looks to be 5-6" deep, looking like a 14" saw. I'm surprised to see that you don't recognize that type of saw. Those things all have a 10" blade. They don't come any bigger and they can't accommodate a blade bigger than that. If the blade is fully raised, the depth of cut will be about 3.5" deep. (Depth of cut, not 'kerf', since kerf refers to the thickness of the blade, rather than its diameter. Full kerf usually means 1/8", while thin kerf is somewhat less than that.) This is just a big skill saw with a nicer rip fence. It's just a standard 10" jobsite table saw, flipped upside down. It still has its stand attached. It looks like a Porter Cable or possibly a Delta. For example: https://www.homedepot.com/p/Delta-10-in-Portable-Contractor-Table-Saw-36-6023/311675216 Even more reason to wonder why you were so amazed. I'm even more amazed that you didn't know the difference between a skil saw and a table saw. Once you pick it up and turn it over, the only distinction is size. And safety features. (who calls circular saws "Skil saws" anymore?) Old farts. They are all either circular saws, reciprocating saws or chain saws. I look at it like you bring the work to a table saw and you bring a skil saw to the work. This is clearly bringing the saw to the work. |
| All times are GMT +1. The time now is 04:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter