Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
RB
 
Posts: n/a
Default do i need to pull the starter?

Went over to our American Legion Post today and worked on a couple of mowers
we use on the 10 acre grass areas.

One needed blade changeout. No problem.

The other is dead, with a brand new battery. It's the classic old bad
solenoid syndrome/symptom.

I was going to find the solenoid and jump it to verify it's the culprit.
But, it seems to me that the solenoid must be inside the starter case. The
wire from the positive battery terminal goes straight to a terminal on the
side of the starter.

I talked to a guy in passing who said: "oh yeah, these newer mowers have
starter soenoid units inside one case. If either is bad, you have to
replace the whole unit".

Is this true? If this is the situation, I may as well get busy pulling the
starter unit.



  #2   Report Post  
Stormin Mormon
 
Posts: n/a
Default

If you don't know enough about starters to post enough information, you may
not know enough to work on starters.

We don't have enough information at this point.

--

Christopher A. Young
Learn more about Jesus
www.lds.org
www.mormons.com


"RB" wrote in message
. ..
Went over to our American Legion Post today and worked on a couple of mowers
we use on the 10 acre grass areas.

One needed blade changeout. No problem.

The other is dead, with a brand new battery. It's the classic old bad
solenoid syndrome/symptom.

I was going to find the solenoid and jump it to verify it's the culprit.
But, it seems to me that the solenoid must be inside the starter case. The
wire from the positive battery terminal goes straight to a terminal on the
side of the starter.

I talked to a guy in passing who said: "oh yeah, these newer mowers have
starter soenoid units inside one case. If either is bad, you have to
replace the whole unit".

Is this true? If this is the situation, I may as well get busy pulling the
starter unit.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FLUORESCENT LIGHT WITHOUT TRANFORMER AND STARTER ? mowhoong Electronics Repair 2 May 7th 04 10:13 PM
removing pull dowel pins KD Metalworking 3 March 13th 04 03:47 AM
how to rewire bathroom pull switch to regular light switch Nick UK diy 20 January 20th 04 07:57 PM
Fluorescent light tube starter Mark UK diy 6 November 14th 03 11:09 PM
Motor Starter question Tony Metalworking 2 September 30th 03 01:25 AM


All times are GMT +1. The time now is 09:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"