DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Advice on system to get rid of the moldy, musty odour and/or avoid it in basement (https://www.diybanter.com/home-repair/67182-advice-system-get-rid-moldy-musty-odour-avoid-basement.html)

Sheldon August 30th 04 05:23 AM

Advice on system to get rid of the moldy, musty odour and/or avoid it in basement
 
Hi,

I have heard a home improvement person on radio (Ren Molnar) talk about a
system to remove moisture from the basement. I have added the information
below. Would this work? Anyone heard of this or tried it? Any advice on
this?

Thanks in advance
Sheldon

Ventilate the area better. Try making your own system: As air cools, it
falls and keeps falling until it reaches the lowest level in the house. It
cannot fall beyond the basement floor and that is where it has to be
collected and pumped outside before that moisture gets a chance to condense
in order to get rid of the moldy, musty odour and/or avoid it in the first
place. A booster fan (250 CFM +) is available as a 'pop in' unit to fit 4",
5" or 6" round heating duct. This can be installed in a totally separate
duct line that is at least six feet from the nearest heat source. A timer on
it will ensure that it operates only during the night (9pm to 9am) so cold,
moist air it pumps out is not replaced by air that brings in even more
humidity from outside. All joints and seams in the duct are taped and sealed
for maximum efficiency and rather than a heating-type grill it should be a
return air-type grill. To avoid having to core another hole in the
foundation wall, this system can be vented, via a "TY" through the clothes
dryer vent. Because none of the doors in the house go all the way to the
floor, cold, moist air should find its way to that grill.


Answered By: Ren Molnar



Joseph Meehan August 30th 04 12:06 PM

Sheldon wrote:
Hi,

I have heard a home improvement person on radio (Ren Molnar) talk about a
system to remove moisture from the basement. I have added the information
below. Would this work? Anyone heard of this or tried it? Any advice on
this?

Thanks in advance
Sheldon


If life was only that simple.

Moisture in a basement is a many part question. You need to attack the
problem you have.

First, if you have excessive moisture coming in, you need to reduce
that. Concrete and block are not moisture proof. Some moisture is going to
come in from outside, so you need to try and reduce that. Make sure the
ground, walks and drives all the way around your home slope away from your
home. Next make sure the water from your roof is not draining close to your
more. (20 feet is considered minimum.)

Next is ventilation. The ideas suggested would not be my first choice.
While they may work in some situations, I would not start there. You may
want to consult a HVAC professional to for ventilation issues.

In many cases it is going to require a dehumidifier.

If it is a craw space, then you do want to do ventilation, but with
sufficient ventilation area, you should not need any power vents.

--
Joseph E. Meehan

26 + 6 = 1 It's Irish Math





All times are GMT +1. The time now is 12:56 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter