Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2
Default Leaking kitchen faucet

On Monday, August 26, 2019 at 10:54:38 PM UTC-4, A K wrote:
My kitchen faucet has a slow leak coming from the faucet.

I removed the hot side knob (while forgetting to turn off the shutoff valve first) and some parts went airborne while I rushed to turn off the water..

Which part or parts do I need to replace?

I think the spring and the rubber object next to it go in the hole in the well.

What order do they go in if I am right?

Thanks.

https://imgur.com/a/WgtZKz3

https://imgur.com/a/sApTvi4


So, you think you put the rubber valve seat into the cartridge socket before the spring. You didn't say if the spring is still in there as well. If the spring is there, it's easier to remove than the valve seat because there's more to grab. Get a bright flashlight so you can see what you will be doing. Find or get something long and narrow to grab what's down there. If you have tweezers, very narrow needle-nose pliers, or a straight surgical hemostatic clamp, you might be able to grab whatever it is and pull it out. If those aren't available, try to find a thin strong object with a little hook on the end such as an escargot pick or crochet hook. If you have a heavy duty paper clip you may be able to straighten it out and fashion a small hook on the end using pliers. (If you use the paper clip, DON'T DROP IT DOWN THE VALVE SEAT!! Try to snag the spring (or valve seat) under an edge and gently pull up. Next, if only the rubber valve seat is down there, try opening the supply valve so there is just a very small flow of water and the flow of water may help float the valve seat out while you're trying to extract it. If all that fails, you may be able to snag a free edge under the thread of a drill bit but don't drop it in the hole! Last suggestion: Turn off supply to both hot and cold water, unscrew the nuts that hold the faucet assembly on the sink, remove the faucet, and attack the offending item from below with a screwdriver. If all else fails, get a handy man or plumber. Good luck!
  #2   Report Post  
Posted to alt.home.repair
A K A K is offline
external usenet poster
 
Posts: 164
Default Leaking kitchen faucet

On Tuesday, August 27, 2019 at 1:41:54 PM UTC-5, wrote:
On Monday, August 26, 2019 at 10:54:38 PM UTC-4, A K wrote:
My kitchen faucet has a slow leak coming from the faucet.

I removed the hot side knob (while forgetting to turn off the shutoff valve first) and some parts went airborne while I rushed to turn off the water.

Which part or parts do I need to replace?

I think the spring and the rubber object next to it go in the hole in the well.

What order do they go in if I am right?

Thanks.

https://imgur.com/a/WgtZKz3

https://imgur.com/a/sApTvi4


So, you think you put the rubber valve seat into the cartridge socket before the spring. You didn't say if the spring is still in there as well. If the spring is there, it's easier to remove than the valve seat because there's more to grab. Get a bright flashlight so you can see what you will be doing. Find or get something long and narrow to grab what's down there. If you have tweezers, very narrow needle-nose pliers, or a straight surgical hemostatic clamp, you might be able to grab whatever it is and pull it out. If those aren't available, try to find a thin strong object with a little hook on the end such as an escargot pick or crochet hook. If you have a heavy duty paper clip you may be able to straighten it out and fashion a small hook on the end using pliers. (If you use the paper clip, DON'T DROP IT DOWN THE VALVE SEAT!! Try to snag the spring (or valve seat) under an edge and gently pull up. Next, if only the rubber valve seat is down there, try opening the supply valve so there is just a very small flow of water and the flow of water may help float the valve seat out while you're trying to extract it. If all that fails, you may be able to snag a free edge under the thread of a drill bit but don't drop it in the hole! Last suggestion: Turn off supply to both hot and cold water, unscrew the nuts that hold the faucet assembly on the sink, remove the faucet, and attack the offending item from below with a screwdriver. If all else fails, get a handy man or plumber. Good luck!


I got them out.

I put in a maintenance request after I re-assembled it correctly.

I think both cartridges need to be replaced. They are at least 7 years old.

Bathroom faucet leaks as well.

Andy
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New kitchen faucet installed; old faucet autopsied Joe Gwinn Metalworking 13 July 21st 17 06:50 PM
Leaking kitchen faucet KenK Home Repair 8 November 2nd 16 09:10 PM
Leaking kitchen faucet Andy[_35_] Home Repair 3 November 10th 14 06:00 PM
Leaking Kitchen Faucet....Where??? [email protected] Home Repair 2 February 7th 07 03:58 PM


All times are GMT +1. The time now is 11:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"