tips for using a glass cutter?
 

I have been trying to cut some custom sized picture frames from some
spare glass I have. However, trying repeatedly, I can't seem to get the
same results I see in video demos or web instructions that I should.
Seems that I either break the glass while I'm trying to cut it or it's
never breaking the way it should once the mark is made. At first I
thought it was that the cutter was too old as it had been in the outdoor
toolbox for years, so I picked up a brand new one but the same thing
happens. I tried dipping the end in oil (all I had was olive oil) but
same thing. I also don't hear the "paper cutting sound" that the videos
seem to indicate, so something is not right. Before I try going any
further, I'd appreciate any help or suggestions. The cutter I've been
using is identical to the one he

https://images-na.ssl-images-amazon....L._SL1500_.jpg

Thank you!

tips for using a glass cutter?
 

On 09/11/2017 09:09 AM, JBI wrote:
I have been trying to cut some custom sized picture frames from some
spare glass I have. However, trying repeatedly, I can't seem to get the
same results I see in video demos or web instructions that I should.
Seems that I either break the glass while I'm trying to cut it or it's
never breaking the way it should once the mark is made. At first I
thought it was that the cutter was too old as it had been in the outdoor
toolbox for years, so I picked up a brand new one but the same thing
happens. I tried dipping the end in oil (all I had was olive oil) but
same thing. I also don't hear the "paper cutting sound" that the videos
seem to indicate, so something is not right. Before I try going any
further, I'd appreciate any help or suggestions. The cutter I've been
using is identical to the one he

https://images-na.ssl-images-amazon....L._SL1500_.jpg

Thank you!



It takes real skill.

First you need a good flat workbench.

I use an old hollow core door.


Before you get too far I also advise wearing light cotton gloves and
safety glasses.


The cutter can be a cheapie, just as long as the wheel is still
good...and a drop of oil does not hurt things.



Next, you really have to press relatively hard.
The first few times I tried this I was a bit timid with the pressure but
you need to get a pretty decent score.


Finally make sure the line is right at the edge of the door, then give
it a very firm and fast push.

I broke a lot of glass at first because I did not use enough force.


One more thing:


Make sure there is sufficient glass.


I think you need at least 4" beyond the edge of the table to get a
decent grip.

tips for using a glass cutter?
 

On 11-Sep-17 9:09 AM, JBI wrote:
....

... I also don't hear the "paper cutting sound" that the videos
seem to indicate, so something is not right. Before I try going any
further, I'd appreciate any help or suggestions. ...

What's the source of the glass and how thick is it?

Ordinary window pane glass is quite easy to score and break cleanly;
sounds like this might be tempered or thicker.

--

tips for using a glass cutter?
 

On Mon, 11 Sep 2017 11:27:44 -0500, dpb wrote:


Ordinary window pane glass is quite easy to score and break cleanly;
sounds like this might be tempered or thicker.


IIUC, glass is tempered after cut to size. My guess, is cutting
tempered glass would shatter the entire piece into bits.

tips for using a glass cutter?
 

On 09/11/2017 12:52 PM, Oren wrote:
On Mon, 11 Sep 2017 11:27:44 -0500, dpb wrote:


Ordinary window pane glass is quite easy to score and break cleanly;
sounds like this might be tempered or thicker.


IIUC, glass is tempered after cut to size. My guess, is cutting
tempered glass would shatter the entire piece into bits.




I had some tempered glass that would not cut at all.

I also had some safety glass (did not know it) and sure got a surprise
when the whole piece turned into little pebbles

tips for using a glass cutter?
 

On Mon, 11 Sep 2017 10:09:58 -0400, JBI wrote:

I have been trying to cut some custom sized picture frames from some
spare glass I have. However, trying repeatedly, I can't seem to get the
same results I see in video demos or web instructions that I should.

I have a friend that has made his living over the past 41 years repairing
and reproducing stained glass windows. He always lubricates the blade
before scoring. He dips the blade into a jar with a rag soaked in kerosene.
He says any oil will do. And that they sell glass cutter lubricant, though
I did not find any on doing an Amazon search.

Don. www.donwiss.com (e-mail link at home page bottom).

tips for using a glass cutter?
 

On 9/13/2017 11:06 AM, Don Wiss wrote:
On Mon, 11 Sep 2017 10:09:58 -0400, JBI wrote:

I have been trying to cut some custom sized picture frames from some
spare glass I have. However, trying repeatedly, I can't seem to get the
same results I see in video demos or web instructions that I should.

I have a friend that has made his living over the past 41 years repairing
and reproducing stained glass windows. He always lubricates the blade
before scoring. He dips the blade into a jar with a rag soaked in kerosene.
He says any oil will do. And that they sell glass cutter lubricant, though
I did not find any on doing an Amazon search.

Don. www.donwiss.com (e-mail link at home page bottom).


https://www.amazon.com/CRL-Professio.../dp/B00269T4K0

tips for using a glass cutter?
 

On Mon, 11 Sep 2017 15:10:18 -0500, philo wrote:

On 09/11/2017 12:52 PM, Oren wrote:
On Mon, 11 Sep 2017 11:27:44 -0500, dpb wrote:


Ordinary window pane glass is quite easy to score and break cleanly;
sounds like this might be tempered or thicker.


IIUC, glass is tempered after cut to size. My guess, is cutting
tempered glass would shatter the entire piece into bits.




I had some tempered glass that would not cut at all.

I also had some safety glass (did not know it) and sure got a surprise
when the whole piece turned into little pebbles

A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)

tips for using a glass cutter?
 

Oren wrote:

A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)


How can I get my ball back? ; )

tips for using a glass cutter?
 

On Wed, 13 Sep 2017 18:07:15 -0400, Bill
wrote:

Oren wrote:

A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)


How can I get my ball back? ; )

Only after you confess to owning the ball and risking you pay the
damages. Go for it.

tips for using a glass cutter?
 

Oren wrote:
On Wed, 13 Sep 2017 18:07:15 -0400, Bill
wrote:

Oren wrote:
A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)

How can I get my ball back? ; )
Only after you confess to owning the ball and risking you pay the
damages. Go for it.

I didn't hit it. I just lent it to someone in the foursome ahead of us
who needed one. I had to lend him that one, and two more. Does that
make me an accomplice?

tips for using a glass cutter?
 

On 09/13/2017 05:07 PM, Bill wrote:
Oren wrote:

A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)


How can I get my ball back?Â* ; )



LOL


I quit golfing in 1967


heard my ball hit a parked car

tips for using a glass cutter?
 

On 09/16/2017 07:30 PM, philo wrote:
On 09/13/2017 05:07 PM, Bill wrote:
Oren wrote:

A guy living right near a golf course Tee, had his patio door glass
shatter twice into little "pebbles". I've seen golf balls embedded
into the house stucco at another house. Missed the window :-)


How can I get my ball back? ; )



LOL


I quit golfing in 1967


heard my ball hit a parked car

My version of golf involves a .357. It's a little rough on the balls but
I find plenty of freebies in the puckerbrush along the bike trail that
goes around the golf course.