DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Window A/C unit - drill holes in water pan ? (https://www.diybanter.com/home-repair/593815-re-window-c-unit-drill-holes-water-pan.html)

monkey[_3_] July 21st 17 11:14 PM

Window A/C unit - drill holes in water pan ?
 
replying to TURTLE, monkey wrote:
"If all possible, try to live with the water in it every year and deal with."

What about the problem of the bottom of the coil "rusting out"? I've had a
relatively brand new unit (2 yrs old) fail because of the bottom inch or so of
the rear coils oxidizing to the point of it freon leaking. Both the copper
pipe and the aluminum fins disintegrated into white and green paste!

--
for full context, visit https://www.homeownershub.com/mainte...an-521719-.htm



Ed Pawlowski July 22nd 17 01:10 AM

Window A/C unit - drill holes in water pan ?
 
On 7/21/2017 6:14 PM, monkey wrote:
replying to TURTLE, monkey wrote:
"If all possible, try to live with the water in it every year and deal
with."

What about the problem of the bottom of the coil "rusting out"? I've had a
relatively brand new unit (2 yrs old) fail because of the bottom inch or
so of
the rear coils oxidizing to the point of it freon leaking. Both the copper
pipe and the aluminum fins disintegrated into white and green paste!


The drip pan is usually about 1/2" deep. You have bigger problems than
water in the pan to get that much oxidation. I've never seen one go as
you describe.

Many a new AC was made into scrap by people drilling holes in the
bottom. 13 years later, the advice not to drill still holds.

Uncle Monster[_2_] July 22nd 17 01:39 AM

Window A/C unit - drill holes in water pan ?
 
On Friday, July 21, 2017 at 5:14:06 PM UTC-5, monkey wrote:
replying to TURTLE, monkey wrote:
"If all possible, try to live with the water in it every year and deal with."

What about the problem of the bottom of the coil "rusting out"? I've had a
relatively brand new unit (2 yrs old) fail because of the bottom inch or so of
the rear coils oxidizing to the point of it freon leaking. Both the copper
pipe and the aluminum fins disintegrated into white and green paste!
--


The chemicals from the crystal meth you're cooking are very corrosive to aluminium, copper and steel. You should do all the cooking of that stuff in a well ventilated shed behind your trailer. Keep the gerbils away from the meth, it's really bad for the furry little guys. ヽ(ヅ)ノ

[8~{} Uncle Furry Monster


All times are GMT +1. The time now is 12:34 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter