Lawnmower Blade Bolt: Counter Or Revers Threaded ?
Hello,
Forgot to ask previously. Is the Bolt that holds the blade on typically counter, or reverse threaded ? Have a several year old Toro Single Blade 22" walk behind lawnmower Model 20005 (GTS Recycler): Thanks, Bob |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On Fri, 26 May 2017 13:14:44 -0400, Bob wrote:
Is the bolt that holds the blade on counter, or reverse threaded ? No. |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On 5/26/17 1:14 PM, Bob wrote:
Hello, Forgot to ask previously. Is the Bolt that holds the blade on typically counter, or reverse threaded ? Have a several year old Toro Single Blade 22" walk behind lawnmower Model 20005 (GTS Recycler): Thanks, Bob No, but they are usually very tight, requiring a breaker bar, or impact wrench, to remove. Some WD-40 or PB Blaster helps also. |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On Fri, 26 May 2017 13:14:44 -0400
Bob wrote: Hello, Forgot to ask previously. Is the Bolt that holds the blade on typically counter, or reverse threaded ? Have a several year old Toro Single Blade 22" walk behind lawnmower Model 20005 (GTS Recycler): Thanks, Bob Try one way and if you fail go the other. |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On 05/26/2017 01:13 PM, Retired wrote:
On 5/26/17 1:14 PM, Bob wrote: Hello, Forgot to ask previously. Is the Bolt that holds the blade on typically counter, or reverse threaded ? Have a several year old Toro Single Blade 22" walk behind lawnmower Model 20005 (GTS Recycler): Thanks, Bob No, but they are usually very tight, requiring a breaker bar, or impact wrench, to remove. Some WD-40 or PB Blaster helps also. +1 on that. I bought a Harbor Freight electric impact wrench for a specific job involving motorcycle forks but it's saved the day a couple of times. The nice thing about an impact wrench is you don't have to figure out some way to hold the blade to keep the engine from turning. You definitely don't want to crank up the engine while you're trying to get the bolt out. Personally I think that's very unlikely but given enough monkeys and enough rotary lawnmowers... |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On Friday, May 26, 2017 at 1:14:48 PM UTC-4, Bob wrote:
Hello, Forgot to ask previously. Is the Bolt that holds the blade on typically counter, or reverse threaded ? Have a several year old Toro Single Blade 22" walk behind lawnmower Model 20005 (GTS Recycler): Thanks, Bob I've never seen one that was reverse threaded. |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On 05/26/2017 08:45 PM, rbowman wrote:
[snip] You definitely don't want to crank up the engine while you're trying to get the bolt out. Personally I think that's very unlikely but given enough monkeys and enough rotary lawnmowers... You could disconnect the spark plug. |
Lawnmower Blade Bolt: Counter Or Revers Threaded ?
On Sat, 27 May 2017 10:49:37 -0500, Sam E
wrote: On 05/26/2017 08:45 PM, rbowman wrote: [snip] You definitely don't want to crank up the engine while you're trying to get the bolt out. Personally I think that's very unlikely but given enough monkeys and enough rotary lawnmowers... You could disconnect the spark plug. !0-4 Butter Bean! |
All times are GMT +1. The time now is 11:05 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter