Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.

On 5/26/17 12:49 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.


Ding ding ding ding ding ding. We have a winner for the Butthead of the
Week post in the AHR newsgroup!

On 5/26/2017 1:15 PM, Travis Bickle wrote:
On 5/26/17 12:49 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.


Ding ding ding ding ding ding. We have a winner for the Butthead of the Week post in the AHR newsgroup!


Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.

Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?

On Fri, 26 May 2017 13:15:14 -0400, Travis Bickle wrote:

On 5/26/17 12:49 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.


Ding ding ding ding ding ding. We have a winner for the Butthead of the
Week post in the AHR newsgroup!

A simple thread gauge an a tape measure is all that's required. Why do you have a problem with the OP doing
just a little work to answer his question? Or are you a snowflake?

On Fri, 26 May 2017 15:04:15 -0400, Grumpy Old White Guy wrote:

On 5/26/2017 1:15 PM, Travis Bickle wrote:
On 5/26/17 12:49 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.


Ding ding ding ding ding ding. We have a winner for the Butthead of the Week post in the AHR newsgroup!


Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.

A thread gauge and tape measure is all that's required sweet pea.

Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?

There ain't no such thing as a M12.7x1.95. You're so cute.

On 5/26/2017 4:39 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 15:04:15 -0400, Grumpy Old White Guy wrote:

On 5/26/2017 1:15 PM, Travis Bickle wrote:
On 5/26/17 12:49 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 06:56:29 -0400, Bob wrote:

Hi,

For a several year old Toro 22" walk behind lawnmower
Model 20005 (GTS Recycler):

Anyone know the bolt type that they use to hold the blade on ?

Metric or English ?

Size ?

Thanks,
Bob

Measure the diameter, length and pitch and your questions will be answered.


Ding ding ding ding ding ding. We have a winner for the Butthead of the Week post in the AHR newsgroup!


Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.

A thread gauge and tape measure is all that's required sweet pea.

Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?

There ain't no such thing as a M12.7x1.95. You're so cute.


There is
https://www.fastenal.com/products/details/0122039
Compliance: REACH RoHS Diameter:M12Diameter-
Thread Size:M12-1.75Finish:Plain
Grade:Class 10.9Length:170mm
Material:Steel
REACH:YRoHS:Y
SpecificationIN 931System of Measurement:MetricThread:CoarseThread
Size:1.75Thread Type:Partial Thread
Type:Hex Cap Screw

On Fri, 26 May 2017 18:17:31 -0400, Ed Pawlowski wrote:

Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.

A thread gauge and tape measure is all that's required sweet pea.

Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?

There ain't no such thing as a M12.7x1.95. You're so cute.


There is
https://www.fastenal.com/products/details/0122039
Compliance: REACH RoHS Diameter:M12Diameter-
Thread Size:M12-1.75Finish:Plain
Grade:Class 10.9Length:170mm
Material:Steel
REACH:YRoHS:Y
SpecificationIN 931System of Measurement:MetricThread:CoarseThread
Size:1.75Thread Type:Partial Thread
Type:Hex Cap Screw

No, your link is to an M12 bolt. Sweet pea said an M12.7x1.95 which there ain't no such thing.

On 05/26/2017 06:27 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 18:17:31 -0400, Ed Pawlowski wrote:

Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.
A thread gauge and tape measure is all that's required sweet pea.
Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?
There ain't no such thing as a M12.7x1.95. You're so cute.

There is
https://www.fastenal.com/products/details/0122039
Compliance: REACH RoHS Diameter:M12Diameter-
Thread Size:M12-1.75Finish:Plain
Grade:Class 10.9Length:170mm
Material:Steel
REACH:YRoHS:Y
SpecificationIN 931System of Measurement:MetricThread:CoarseThread
Size:1.75Thread Type:Partial Thread
Type:Hex Cap Screw
No, your link is to an M12 bolt. Sweet pea said an M12.7x1.95 which there ain't no such thing.


Are you humor impaired or just slow?

If you measure a 1/2-13UNC bolt with metric calipers, the diameter will read 12.7mm and the pitch will be 1.95mm

Get it yet?

Joe Mayer wrote:
On 05/26/2017 06:27 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 18:17:31 -0400, Ed Pawlowski wrote:

Yup. Let me grab my $20 digital calipers and I'll tell you exactly
what the thread is. It ain't rocket surgery.
A thread gauge and tape measure is all that's required sweet pea.
Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?
There ain't no such thing as a M12.7x1.95. You're so cute.

There is
https://www.fastenal.com/products/details/0122039
Compliance: REACH RoHS Diameter:M12Diameter-
Thread Size:M12-1.75Finish:Plain
Grade:Class 10.9Length:170mm
Material:Steel
REACH:YRoHS:Y
SpecificationIN 931System of Measurement:MetricThread:CoarseThread
Size:1.75Thread Type:Partial Thread
Type:Hex Cap Screw
No, your link is to an M12 bolt. Sweet pea said an M12.7x1.95 which
there ain't no such thing.


Are you humor impaired or just slow?

If you measure a 1/2-13UNC bolt with metric calipers, the diameter
will read 12.7mm and the pitch will be 1.95mm

Get it yet?


That's not funny.

On Fri, 26 May 2017 19:08:51 -0400, Joe Mayer wrote:

On 05/26/2017 06:27 PM, Gordon Shumway wrote:
On Fri, 26 May 2017 18:17:31 -0400, Ed Pawlowski wrote:

Yup. Let me grab my $20 digital calipers and I'll tell you exactly what the thread is. It ain't rocket surgery.
A thread gauge and tape measure is all that's required sweet pea.
Did you know a 1/2-13 thread is compatible with a metric M12.7x1.95 ?
There ain't no such thing as a M12.7x1.95. You're so cute.

There is
https://www.fastenal.com/products/details/0122039
Compliance: REACH RoHS Diameter:M12Diameter-
Thread Size:M12-1.75Finish:Plain
Grade:Class 10.9Length:170mm
Material:Steel
REACH:YRoHS:Y
SpecificationIN 931System of Measurement:MetricThread:CoarseThread
Size:1.75Thread Type:Partial Thread
Type:Hex Cap Screw
No, your link is to an M12 bolt. Sweet pea said an M12.7x1.95 which there ain't no such thing.


Are you humor impaired or just slow?

If you measure a 1/2-13UNC bolt with metric calipers, the diameter will read 12.7mm and the pitch will be 1.95mm

Get it yet?

No **** Sherlock, I had it all along. There still ain't no such thing.