Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
circuit breaker question!
Kim:
K& Turned off a circuit to change out a hallway light. K& Had to stop because I had to get an extra part. K& Turned the circuit back on and have no power in the adjacent bedroom that K& shares the circuit (and the hallway light, I'm sure). K& Could turning off the circuit in the first place have killed it? Anything's possible! When you reset the breaker to 'ON' did the hallway light work? It is possible for one breaker to share rooms -- having a separate breaker just for the hall light would be silly. (Well, in a normal residential application.) If the hall light works and the bedroom does not, are you sure the bedroom is on the same circuit as the hall? Don't want to be looking at the wrong place! If the junction box of the hallway light only had one wire coming out of it you can probably skip this paragraph. By "one wire" I mean a set of wires in a jacket == black and white and probably a bare copper one, which connected to the light. If there was another jacketed wire in it, or if there was a red wire in there, check those connections (the ones not going to the light). Check the black (could be red -- both mean 'hot') and white (neutral). Assuming the hall light had only a single wire in it, feeding just the light, the problem is elsewhere. The trick is finding it. You need to figure out where the 'common points' are. If none of the bedroom works you don't need to look in all the outlets for a problem, though you may have to look in two or three to discover the original wiring sequence. There may be a junction box in the basement (or attic - depends on how many floors, location, etc.) which had a loose connection open up. Could be the black or white wire -- needs both to make a complete circuit. The problem could also be in the circuit breaker panel, possibly a loose wire coming out of the breaker. If there is one wire coming out of the breaker then this isn't the fault site (the hall light works -- remember the "common point"?). Trace the wire to a junction box. Good luck! - ¯ barry.martinþATþthesafebbs.zeppole.com ® * Is my normal the same as your normal? --- þ RoseReader 2.52á P003186 þ The Safe BBS þ Bettendorf, IA 563-359-1971 --- þ RIMEGate(tm)/RGXMod V1.13 at BBSWORLD * |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hafler DH-500 thermal circuit breaker needed | Electronics Repair | |||
15A Circuit Breaker on a Power Tap | Electronics | |||
circuit breaker | Home Repair | |||
Electric circuit breaker corrosion | Home Repair | |||
breaker tripping | Home Repair |