Replacement Windows: Advice
 

A acquaintance in the northeast of the USA, it contemplating replacement
windows in her 40+ year old home. She is tempted by the many advertisements
she reads, and I'm looking at them with a jaundiced eye. Can anyone out
there care to provide some personal-experience advice on this subject?
There are so many terms, i.e., vinyl, wood that is clad in vinyl, same for
aluminum (I think) - "E" glass, double paned glass, etc. How does one
quickly separate the wheat from all the chaff on this subject? The area of
the residence is NW New Jersey.

Thank you very much for any helpful information that may come of this query.

Gary

reply to (I think you can see what does
not belong).

Replacement Windows: Advice
 

On Sun, 01 Feb 2004 05:13:28 GMT, "Othello1939"
wrote:

A acquaintance in the northeast of the USA, it contemplating replacement
windows in her 40+ year old home. She is tempted by the many advertisements
she reads, and I'm looking at them with a jaundiced eye. Can anyone out
there care to provide some personal-experience advice on this subject?
There are so many terms, i.e., vinyl, wood that is clad in vinyl, same for
aluminum (I think) - "E" glass, double paned glass, etc. How does one
quickly separate the wheat from all the chaff on this subject? The area of
the residence is NW New Jersey.

Thank you very much for any helpful information that may come of this query.

Gary

reply to (I think you can see what does
not belong).

I replaced mine with Traco I would stay away from them at all costs.
The leak air around the edges there factory rep was no help at all in
fact they made a joke out of it with the installer. There warranty
isn't worth the paper it's wrote on.

Replacement Windows: Advice
 

On Sun, 01 Feb 2004 05:13:28 GMT, "Othello1939"
wrote:

A acquaintance in the northeast of the USA, it contemplating replacement
windows in her 40+ year old home. She is tempted by the many advertisements
she reads, and I'm looking at them with a jaundiced eye. Can anyone out
there care to provide some personal-experience advice on this subject?
There are so many terms, i.e., vinyl, wood that is clad in vinyl, same for
aluminum (I think) - "E" glass, double paned glass, etc. How does one
quickly separate the wheat from all the chaff on this subject? The area of
the residence is NW New Jersey.

Thank you very much for any helpful information that may come of this query.

Gary

reply to (I think you can see what does
not belong).

I replaced mine with Traco I would stay away from them at all costs.
The leak air around the edges there factory rep was no help at all in
fact they made a joke out of it with the installer. There warranty
isn't worth the paper it's wrote on.

Replacement Windows: Advice
 

"Othello1939" wrote in message
om...
A acquaintance in the northeast of the USA, it contemplating replacement
windows in her 40+ year old home. She is tempted by the many
advertisements
she reads, and I'm looking at them with a jaundiced eye. Can anyone out
there care to provide some personal-experience advice on this subject?
There are so many terms, i.e., vinyl, wood that is clad in vinyl, same
for
aluminum (I think) - "E" glass, double paned glass, etc. How does one
quickly separate the wheat from all the chaff on this subject? The area
of
the residence is NW New Jersey.

Thank you very much for any helpful information that may come of this
query.

Gary

reply to (I think you can see what
does
not belong).



That's a broad question. You might go to the library and lookup some
Consumer Reports issues. They had a Window issue a few years back. They
rated the Certainteed BrynMawr as a best value. It is a vinyl window. My
neighbor has them, and he's happy with them. I would avoid clad aluminum,
since alum. conducts cold very well. Vinyl or vinyl-clad wood are
preferable, in my opinion. Andersen makes a composite resin windows called
"Renewal", but they ain't cheap.

http://certainteed.com/cwindows/cwct00152p.html

I replaced mine with Andersen Tilt-Wash. They are wood on the inside, and
vinyl clad wood on the exterior side. I think they look better than vinyl,
since you don't lose a lot of glass due to the frame. They are not
replacement sashes, they're complete tear-outs, which new interior casing.
Most replacement windows are sash replacements done in the original frame.
That's not a bad thing, except you tend to lose some glass area.


Find a good installer, and get references, do drive-bys, etc. Look on DOE
and HUD's website, too to educate yourself on the terminology. In NJ, I
would think that you do want Low-E and Argon filled.

Replacement Windows: Advice
 

"Othello1939" wrote in message
om...
A acquaintance in the northeast of the USA, it contemplating replacement
windows in her 40+ year old home. She is tempted by the many
advertisements
she reads, and I'm looking at them with a jaundiced eye. Can anyone out
there care to provide some personal-experience advice on this subject?
There are so many terms, i.e., vinyl, wood that is clad in vinyl, same
for
aluminum (I think) - "E" glass, double paned glass, etc. How does one
quickly separate the wheat from all the chaff on this subject? The area
of
the residence is NW New Jersey.

Thank you very much for any helpful information that may come of this
query.

Gary

reply to (I think you can see what
does
not belong).



That's a broad question. You might go to the library and lookup some
Consumer Reports issues. They had a Window issue a few years back. They
rated the Certainteed BrynMawr as a best value. It is a vinyl window. My
neighbor has them, and he's happy with them. I would avoid clad aluminum,
since alum. conducts cold very well. Vinyl or vinyl-clad wood are
preferable, in my opinion. Andersen makes a composite resin windows called
"Renewal", but they ain't cheap.

http://certainteed.com/cwindows/cwct00152p.html

I replaced mine with Andersen Tilt-Wash. They are wood on the inside, and
vinyl clad wood on the exterior side. I think they look better than vinyl,
since you don't lose a lot of glass due to the frame. They are not
replacement sashes, they're complete tear-outs, which new interior casing.
Most replacement windows are sash replacements done in the original frame.
That's not a bad thing, except you tend to lose some glass area.


Find a good installer, and get references, do drive-bys, etc. Look on DOE
and HUD's website, too to educate yourself on the terminology. In NJ, I
would think that you do want Low-E and Argon filled.

Replacement Windows: Advice
 

I used M & W sash replacement kits for my 30 year old windows, got the vinyl
clad outside and wood inside. They come with a new vinyl track and dual pane
glass in many standard sizes and styles. The kits were simple to install and
seal very well, we are very pleased with the results.

Replacement Windows: Advice
 

I used M & W sash replacement kits for my 30 year old windows, got the vinyl
clad outside and wood inside. They come with a new vinyl track and dual pane
glass in many standard sizes and styles. The kits were simple to install and
seal very well, we are very pleased with the results.

Replacement Windows: Advice
 

Do you have a website for them ? I have a 100-yr old house (7-ft double
hung windows) and am getting ready to make new sashes - - would rather buy
than build in this case.

"Ralph Setzer" wrote in message
...
I used M & W sash replacement kits for my 30 year old windows, got the
vinyl
clad outside and wood inside. They come with a new vinyl track and dual
pane
glass in many standard sizes and styles. The kits were simple to install
and
seal very well, we are very pleased with the results.

Replacement Windows: Advice
 

Do you have a website for them ? I have a 100-yr old house (7-ft double
hung windows) and am getting ready to make new sashes - - would rather buy
than build in this case.

"Ralph Setzer" wrote in message
...
I used M & W sash replacement kits for my 30 year old windows, got the
vinyl
clad outside and wood inside. They come with a new vinyl track and dual
pane
glass in many standard sizes and styles. The kits were simple to install
and
seal very well, we are very pleased with the results.