Whirlpool gas dryer temp control
 

This dryer (Model LG6881XSW1) uses the so-called infinite temperature
control which is a little heater surrounding the operating thermostat
and controlled by a potentiometer.

All seems to be OK, the heater and pot are within specs. Voltage to
the heater ranges from about 111 ("ex low" temp) to 2about 26 volts
(max temp).

But the thing seems to have no effect on the exit air temperature.
With an electrical thermometer in the duct about 5 feet from the
outle, temperature cycles between about 150 deg and 107 deg regardless
of the setting.

The state is marked 150 deg and 20 deg (which I take to be the
differential).

Any advice would be appreciated.

am