DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Glad I Thought Of Doing It This Way... (https://www.diybanter.com/home-repair/382524-glad-i-thought-doing-way.html)

Jeff Wisnia[_9_] April 16th 15 09:55 PM

Glad I Thought Of Doing It This Way...
 
The shelves in all our kitchen cabinets are supported by plastic
supports which look similar to this:

http://www.acehardware.com/product/i...ductId=1296844

They were put in 30 years ago when the place was built and every once in
a while for no apparent reason other than age, one of them snaps off
where the peg joins the support, leaving the peg stuck in the hole in
the sidewall, flush with the surface.

Years ago I used to drag out a power drill with an assortment of bits
and drill out the peg so I could insert a new support.

That worked, but spewed plastic shavings around and once I lost control
and let the drill break through the sidewall of the cabinet.

That's when I thought up this safer way.....

I just take an appropriate size sheet metal screw, hold it by its head
with pliers and heat the tip to nearly red hot with our small propane
"kitchen torch" and then melt it into the broken off plastic peg. I step
back and sing God Bless America to myself once while the screw cools
down, then grab the screw head with pliers and pull out the peg.

BTW, how many of you know there's an opening verse to God Bless America
that's rarely sung these days?

It goes:

While the storm clouds gather far across the sea,
Let us swear allegiance to a land that's free,
Let us all be grateful for a land so fair,
As we raise our voices in a solemn prayer.

God bless America........

Those of us old enough to remember Kate Smith would have heard it, she
always started her singing of God Bless America that way.

Jeff


--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.

David L. Martel[_2_] April 17th 15 12:32 AM

Glad I Thought Of Doing It This Way...
 
Jeff,

$2.99 each? For plastic crap? Buy the brass ones. They are cheaper and
last a lifetime'

Dave M.


Jeff Wisnia[_8_] April 17th 15 01:47 AM

Glad I Thought Of Doing It This Way...
 
David L. Martel wrote:
Jeff,

$2.99 each? For plastic crap? Buy the brass ones. They are cheaper
and last a lifetime'

Dave M.


I don't think that's the "each" price, it's prolly for a bag of 10 or
more, and I was only using that image to describe what I was writing about.

I just ordered a bag of 40 for $8.50 delivered (on eBay).

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.

[email protected] April 17th 15 02:51 AM

Glad I Thought Of Doing It This Way...
 
Great idea, we have similar plastic pegs and I wish I had thought of your idea a few timesg.

[email protected] April 17th 15 03:09 AM

Glad I Thought Of Doing It This Way...
 
On Thu, 16 Apr 2015 18:51:10 -0700 (PDT), "
wrote:

Great idea, we have similar plastic pegs and I wish I had thought of your idea a few timesg.

The right thing to do is pull ALL of them out and replace them while
they are still in one peice. Preferably with the metal replacements.

J Burns April 17th 15 04:26 AM

Glad I Thought Of Doing It This Way...
 
On 4/16/15 4:55 PM, Jeff Wisnia wrote:
I just take an appropriate size sheet metal screw, hold it by its head
with pliers and heat the tip to nearly red hot with our small propane
"kitchen torch" and then melt it into the broken off plastic peg. I step
back and sing God Bless America to myself once while the screw cools
down, then grab the screw head with pliers and pull out the peg.


Call me Mr. Frustration, but I say, "Aw, screw it!"

A #3 wood screw requires a 1/16" pilot hole in hardwood. It wouldn't
have to be deep, and drilling shouldn't put much torque on the peg.

If the peg turned before the screw got a good bite, I'd use a slightly
bigger bit. If that didn't work, I'd go out and get my torch as you
suggested. Good tip!

The new tank is shorter and wider, reducing the chance that I'll knock
it over and set my counter on fire. Still, before lighting the torch,
I'll pump up my garden sprayer. That way, I'll merely feel like an idiot
with a wet, burnt counter.

Bob F April 18th 15 05:07 AM

Glad I Thought Of Doing It This Way...
 
Jeff Wisnia wrote:
David L. Martel wrote:
Jeff,

$2.99 each? For plastic crap? Buy the brass ones. They are cheaper
and last a lifetime'

Dave M.


I don't think that's the "each" price, it's prolly for a bag of 10 or
more, and I was only using that image to describe what I was writing
about.
I just ordered a bag of 40 for $8.50 delivered (on eBay).


I've got a bag of several hundred I picked up in a yard sale freebie pile
somewhere.




All times are GMT +1. The time now is 05:29 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter