extension ladder operation?
 

Long ago, we bought a Werner extension ladder (D1536). Mostly, we've
used it as split sections. Now, though, I need to do a full extension.
The fly rope loops from the (top) pulley, around the bottom rung of the
base section. It came this way - the ends of the rope are joined with a
metal clamp. There's a second slot in the clamp, which could accept
another rope. But, the loop is too short to wrap over the rung of the
fly section.

So, I'm thinking that the rope is just shipped this way, and you're
supposed to cut it, and then just tie one end around the bottom rung of
the fly section. But, I thought I'd ask first.

TIA

extension ladder operation?
 

On Fri, 29 Aug 2014 10:30:01 -0400, George
wrote:

Long ago, we bought a Werner extension ladder (D1536). Mostly, we've
used it as split sections. Now, though, I need to do a full extension.
The fly rope loops from the (top) pulley, around the bottom rung of the
base section. It came this way - the ends of the rope are joined with a
metal clamp. There's a second slot in the clamp, which could accept
another rope. But, the loop is too short to wrap over the rung of the
fly section.

So, I'm thinking that the rope is just shipped this way, and you're
supposed to cut it, and then just tie one end around the bottom rung of
the fly section. But, I thought I'd ask first.

TIA

I would have thought you would have read the instructions first.
Having said that, you're right, the rope is just shipped that way (one
size fits all) so you need to cut it, usually 3 or 4 feet at least. Be
safe.

extension ladder operation?
 

George wrote:
Long ago, we bought a Werner extension ladder (D1536). Mostly, we've
used it as split sections. Now, though, I need to do a full
extension. The fly rope loops from the (top) pulley, around the
bottom rung of the base section. It came this way - the ends of the
rope are joined with a metal clamp. There's a second slot in the
clamp, which could accept another rope. But, the loop is too short
to wrap over the rung of the fly section.

So, I'm thinking that the rope is just shipped this way, and you're
supposed to cut it, and then just tie one end around the bottom rung
of the fly section. But, I thought I'd ask first.



Aren't you just supposed to wrap the rope with the clamp around the bottom rung
and fasten it back to itself. Or maybe the next to bottom rung?

On my extension ladder, the rope is tied to the bottom rung of the fly section and goes up between the rungs and through the pulley attached to the top rung of the base section. The rope then just hangs down from the pulley when the ladder is in use. When the ladder is in storage, I normally just tie the end of the rope around a pair of rungs of both sections just to keep the rope from being all over the place and the ladder tidy.

When I want to set the ladder up, I untie the rope, set the ladder against the wall (or whatever), then lift the ladder so it's vertical and pull the rope to lift the fly section up the base section to the height I need.

NOW, A SURPRISING NUMBER OF PEOPLE DON'T KNOW HOW TO PROPERLY GET FROM A LADDER ONTO A ROOF OR VICE VERSA.

I often see newbies set up their ladder so that it's only a foot or two above the eve of their house and they risk life and limb getting from the ladder onto the roof or from the roof onto the ladder. The correct and safe way of doing it is to raise the ladder so the top of the ladder is a good 4 or 5 feet above the roof line. Climb the ladder so that you're high enough so that you can step directly from the ladder onto the roof. And when you're going from roof back onto the ladder, you can step from the roof directly onto the ladder without having to do anything dangerous at the top of the ladder. If your ladder isn't long enough to be able to step from roof to ladder and from ladder to roof, then you need a longer ladder.

If a helper is available, you should have someone put their weight on the bottom of the ladder while you are going from ladder to roof or from roof to ladder so that the ladder doesn't move.

Whenever possible, take a bungee cord up the ladder with you to anchor the top of the ladder against whatever is available, like an evestrough or metal flashing around a flat roof or whatever. As far as possible, you want to keep that bungee cord secured on the opposite side of the ladder than the side you're climbing to make sure It doesn't catch on your shoe and cause you to trip.

And, if you put your ladder against the END of a gable roof (rather than anywhere along the eve) always step from the ladder onto the lower part of the roof when getting onto the roof and from the lower part of the roof onto the ladder when getting onto the ladder.

This is all simple stuff, but I see so many people taking dangerous risks because they don't know how to get from roof to ladder and ladder to roof without risking their lives, and it' a shame. Some simple instruction would save these people from taking such dangerous risks.

extension ladder operation?
 

nestork wrote:
On my extension ladder, the rope is tied to the bottom rung of the fly
section and goes up between the rungs and through the pulley attached
to the top rung of the base section. The rope then just hangs down
from the pulley when the ladder is in use. When the ladder is in
storage, I normally just tie the end of the rope around a pair of
rungs of both sections just to keep the rope from being all over the
place and the ladder tidy.

As I've seen them, the rope is a loop that just stays betewwn the sections and
under the inside section, so tieing it up is not needed. It has the double
"clamp" so it can be unfastened from the raising section when the ladder is
seperated.

extension ladder operation?
 

"Bob F"
wrote in message nestork wrote:
On my extension ladder, the rope is tied to the
bottom rung of the fly
section and goes up between the rungs and
through the pulley attached
to the top rung of the base section. The rope
then just hangs down
from the pulley when the ladder is in use.

Take the end of that rope that's hanging and wrap
it around the
bottom rung of the base and then up to the rung
that the other
end is anchored to. The rope will travel in the
same path as the
ladder is raised.


When the ladder is in
storage, I normally just tie the end of the
rope around a pair of
rungs of both sections just to keep the rope
from being all over the
place and the ladder tidy.

As I've seen them, the rope is a loop that just
stays betewwn the sections and under the inside
section, so tieing it up is not needed. It has
the double "clamp" so it can be unfastened from
the raising section when the ladder is
seperated.