LED Bulbs Questions
Hello,
Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
LED Bulbs Questions
On 04/08/2014 12:46 PM, Bob wrote:
Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. AFAIK, the dimmer designed for LED's would not require a specific brand. |
LED Bulbs Questions
On 4/8/2014 3:12 PM, philo wrote:
On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? No. b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? Dunno. c. Cree are "good" brand ? Considered one of the best, AND made in the USA. |
LED Bulbs Questions
On Tuesday, April 8, 2014 4:12:21 PM UTC-4, philo* wrote:
On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. That is pretty much what I thought too. But I've seen LED light spec sheets that show compatibility with a wide array of dimmers, a lot of them not specifically for LED lighting. I think the best answer is you need to check the specs for the particular LED and see exactly what they say. |
LED Bulbs Questions
philoÂ* writes:
On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. I had my current dimmer switch installed in 2000. I bought home some Cree LED ceiling floods installed them and they dim fine. Saving energy and long life is great, but the best part is the quality of light I get from the LEDs. -- Dan Espen |
LED Bulbs Questions
Bob wrote:
Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com Answer to a. b. Ordinary dimmers work fine with GE, Phillips brand we installed. If you have more than a bulb in a fixture, just make sure they are same one. Otherwise they flicker maybe due to different current draw? c. Some noticed Cree lamps make faint buzzing. So I did not bother trying them myself. So far I have a dozen LEDs in the house. No issues yet. Had them about 6 months. |
LED Bulbs Questions
On 4/8/2014 4:12 PM, philo wrote:
On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. AFAIK, the dimmer designed for LED's would not require a specific brand. Yes it will. I changed out two incandescent bulbs that were on a dimmer. Put in LEDs and everything works good. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
LED Bulbs Questions
philo* wrote:
snip LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. AFAIK, the dimmer designed for LED's would not require a specific brand. Many LED are dimmable with ordinary dimmers. That is the only kind I will buy. Just check on the package and it will state if a special dimmer is required. -- Jim Rusling More or Less Retired Mustang, OK My local Weather http://www.wunderground.com/weathers...p?ID=KOKMUSTA4 |
LED Bulbs Questions
On Tue, 08 Apr 2014 15:12:21 -0500, philo* wrote:
On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob LED's require a special dimmer control. If you have one now for your incandescent lights, it will not work. AFAIK, the dimmer designed for LED's would not require a specific brand. This is NOT correct. They require a dimmable design. The driver circuitry cannot be a "constant current" driver. There are dimmable and non-dimmable designs - and the dimmable ones dim just fine on a standard dimmer. I use Lutrons, myself. |
LED Bulbs Questions
|
LED Bulbs Questions
On Tue, 08 Apr 2014 15:35:58 -0500, Moe DeLoughan
wrote: On 4/8/2014 3:12 PM, philo wrote: On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? No. b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? Dunno. c. Cree are "good" brand ? Considered one of the best, AND made in the USA. But a very large number of "cree" LED lamps are assembled in China and have a less than stellar record. I've used Chinese sourced MR16 and GU10, both dimmable and non dimmable. Of about 150 -160 of the 12 volt ones I have installed, I have replaced over 75 over a period of less than 2 years. Of thw 120 volt ones, of which I have 7 installed in one track and 3 others, I have replaced 12 in the last 2 years. These are 3X3 and 4X3 watt assemblies. Bothe driver circuitry and LED failures have been experienced. The LEDs are fastened to aluminum "star" boards but theleds do not contact the heat sink (board) except by the contacts and there is no thermal compound used - which means CRAPPY construction, and heat failures. The driver electronics are "potted" into the base with RTV silicone. My suspicion is they are also failing due to heat stress. Some fail by going to a "flash mode" first, and others just go to a very dull glow. |
LED Bulbs Questions
On Tue, 08 Apr 2014 15:55:44 -0600, Tony Hwang
wrote: Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? c. Cree are "good" brand ? Thanks, Bob --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com Answer to a. b. Ordinary dimmers work fine with GE, Phillips brand we installed. If you have more than a bulb in a fixture, just make sure they are same one. Otherwise they flicker maybe due to different current draw? c. Some noticed Cree lamps make faint buzzing. So I did not bother trying them myself. So far I have a dozen LEDs in the house. No issues yet. Had them about 6 months. I've got 5 Phillips bulbs in a kitchen ceiling fan. They are on a dimmer, and they dim nicely, but they DO buzz. It bothers my daughter, my wife says she hears it when they are dimmed - I only hear it if I really listen for it. |
LED Bulbs Questions
Bob wrote:
Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? No. b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? Perhaps. c. Cree are "good" brand ? Yep. Thanks, Bob Greg |
LED Bulbs Questions
|
LED Bulbs Questions
On Tuesday, April 8, 2014 8:18:00 PM UTC-4, wrote:
On Tue, 08 Apr 2014 15:35:58 -0500, Moe DeLoughan wrote: On 4/8/2014 3:12 PM, philo wrote: On 04/08/2014 12:46 PM, Bob wrote: Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? No. b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? Dunno. c. Cree are "good" brand ? Considered one of the best, AND made in the USA. But a very large number of "cree" LED lamps are assembled in China and have a less than stellar record. I've used Chinese sourced MR16 and GU10, both dimmable and non dimmable. Of about 150 -160 of the 12 volt ones I have installed, I have replaced over 75 over a period of less than 2 years. Of thw 120 volt ones, of which I have 7 installed in one track and 3 others, I have replaced 12 in the last 2 years. These are 3X3 and 4X3 watt assemblies. Bothe driver circuitry and LED failures have been experienced. The LEDs are fastened to aluminum "star" boards but theleds do not contact the heat sink (board) except by the contacts and there is no thermal compound used - which means CRAPPY construction, and heat failures. The driver electronics are "potted" into the base with RTV silicone. My suspicion is they are also failing due to heat stress. Some fail by going to a "flash mode" first, and others just go to a very dull glow. OMG, this is why I've been reluctant to buy LED's. Given where they were priced and my experience with CFL's, I wasn't going to pay $30 to find out if they lasted anywhere near the claimed life. That must have been a very expensive experience. |
LED Bulbs Questions
On Tuesday, April 8, 2014 1:46:07 PM UTC-4, Bob wrote:
Hello, Trying to learn about all these new replacement bulb, but sure is confusing. a. Are all brands, styles, etc. of the new LED bulbs dimmable (assuming you have the right Dimmer switch) ? No, and not even all bulbs from the same manufacturer. b. If not, are the non-dimmable ones cheaper than the ones that are dimmable capable ? Often. c. Cree are "good" brand ? Yes, although if you can find them, I would try to search out the "true white" ones as they have a higher CRI than the ~80 CRI of the usual ones sold at Big Orange. I'm kind of a light quality snob, and really hope that LED development goes more towards high quality light than did CFLs which I found fairly disappointing overall. nate |
All times are GMT +1. The time now is 06:31 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter