Tiles - anti-slip - DIY products?
 

I live in Australia, and I've got some slippery ceramic tiles in my
bathroom and shower, and I'm sick of using the shower mat because it
causes mould. I've been looking at these various types of non-slip
treatments about, and there are so many to choose from, I don't know
which is best. When I made some phone calls, most companies offer an
anti-slip service for your tiles, not a DIY product. From what I've
found, most of these anti-slip products are made from some type of
acid or another which mildly etches the surface of the tile, creating
a very slightly rough surface. Can anyone offer any advice as to
which type of acid or product is best? Ideally, I'd like to know what
specific acid/active ingredient is best, which I can then source. The
whole idea is to minimise the cost.

Tiles - anti-slip - DIY products?
 

Gas Bag wrote:
I live in Australia, and I've got some slippery ceramic tiles in my
bathroom and shower, and I'm sick of using the shower mat because it
causes mould. I've been looking at these various types of non-slip
treatments about, and there are so many to choose from, I don't know
which is best. When I made some phone calls, most companies offer an
anti-slip service for your tiles, not a DIY product. From what I've
found, most of these anti-slip products are made from some type of
acid or another which mildly etches the surface of the tile, creating
a very slightly rough surface. Can anyone offer any advice as to
which type of acid or product is best? Ideally, I'd like to know what
specific acid/active ingredient is best, which I can then source. The
whole idea is to minimise the cost.

Assuming these are glazed tiles, the glaze is glass. The acid that eats
glass is hydrofluoric. It isn't something I recommend you use. Instead,
get one of the glass etching kits - DAGS - which also contain hydrofluoric
acid but with other materials and are usually in a cream form. Be careful
with them too.

Another way is physical etching; i.e., light sand blasting.

A third way is to embed something like pumice in a clear coat on top of the
tiles. That will ultimately wear off but is easy to redo.

--

dadiOH
____________________________

Winters getting colder? Tired of the rat race?
Maybe just ready for a change? Check it out...
http://www.floridaloghouse.net

Tiles - anti-slip - DIY products?
 

I suppose you've seen this - http://www.globalsafe.com.au/polyurethane.php. Seems several websites make mention of this product. There should be a way of finding a distributor (call and ask) or buying direct from the company.

This site mentions free samples for their anti-slip product (top right of page). http://www.slipstop.com.au/

Sonny

Tiles - anti-slip - DIY products (follow up)
 

Thanks for the reply. This is the stuff I've recently used:

http://www.dta-aus.com.au/products/AS1L - I'm fairly sure the active
ingredient is Sulfonic Acid.

I've used it on some modern ceramic tiles in the bathroom and shower,
and also on some (very) old outdoor ceramic or cement tiles with some
sort of glaze or polish on them. It has worked incredibly well on the
bathroom tiles - even better than I thought it would. But it has only
had a tiny non-slip effect on the old, glazed, outdoor tiles. Do you
know of any other products (or active ingredients) that work well on
cement or ceramic tiles that have been glazed? I don't care if the
stuff is corrosive, as I can always dilute it, but if it's toxic (e.g.
Hydrofluoric Acid)....not happening. Sand blasting? Just not
practical.

Tiles - anti-slip - DIY products (follow up)
 

On 8/16/2012 1:04 AM, Gas Bag wrote:
Thanks for the reply. This is the stuff I've recently used:

http://www.dta-aus.com.au/products/AS1L - I'm fairly sure the active
ingredient is Sulfonic Acid.

I've used it on some modern ceramic tiles in the bathroom and shower,
and also on some (very) old outdoor ceramic or cement tiles with some
sort of glaze or polish on them. It has worked incredibly well on the
bathroom tiles - even better than I thought it would. But it has only
had a tiny non-slip effect on the old, glazed, outdoor tiles. Do you
know of any other products (or active ingredients) that work well on
cement or ceramic tiles that have been glazed? I don't care if the
stuff is corrosive, as I can always dilute it, but if it's toxic (e.g.
Hydrofluoric Acid)....not happening. Sand blasting? Just not
practical.


they make in-place sandblasting that have integrated suction, so they
can be used in-home. contact a place that does shower doors and ask them
if they have one.

hydroflouric acid isn't toxic. it just goes through your skin like it's
not there, you can't feel it, and your bones dissolve (THAT is the
painful part).

Tiles - anti-slip - DIY products (follow up)
 

chaniarts wrote in news:k0j8ug$5m3$1@dont-
email.me:


[...]


hydroflouric acid isn't toxic. it just goes through your skin like it's
not there, you can't feel it, and your bones dissolve (THAT is the
painful part).




Wrong. HF is considered a contact poison.


From http://www.sciencedirect.com/science...3646799290211B

"Hydrofluoric acid is a toxic substance used widely in both industrial and
domestic settings. It can cause severe burns, as well as systemic toxicity.
Death has been reported from as little as 2.5% body surface area (BSA) burn
involving concentrated acid. Topical and parenteral calcium salts have
proven effective therapy for both dermal and systemic manifestations. All
emergency physicians should be aware of the unique complications and
treatment of these injuries."

Information from other sources, including MSDS documents, is easily
available on the Web.