Paint black side gate
 

My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictu http://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

Paint black side gate
 

Not sure what the white stuff is..

My neighbor have the same type and color side gate, and he recently
had a contractor come to reprint it. Looks very nice. Looks like just
gloss paint or something.

On May 26, 4:51*pm, Evan wrote:
On May 26, 7:06*pm, " wrote:

My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictuhttp://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

You will not be able to duplicate that finish, it looks like
a powder coated factory applied enamel finish...

You have some rust to deal with which you should remove
and spot prime before painting...

What is that white residue all over the latch side of the gate?

Is there something above which is draining/running off onto
the gate ?

Paint black side gate
 

On 5/27/2012 2:14 AM, wrote:
Not sure what the white stuff is..

Oxidized paint or lime deposit from sprinkler? Oxidized paint might
come off with rubbing compound. Does the haze lie on area with most sun
exposure? I don't see rust; if there is rust, rub/sand it out, used
rusty metal primer and repaint. You can rough the rest of the surface
(to repaint), use a brush and Rustoleum enamel. Should last a good while.

My neighbor have the same type and color side gate, and he recently
had a contractor come to reprint it. Looks very nice. Looks like just
gloss paint or something.

On May 26, 4:51 pm, wrote:
On May 26, 7:06 pm, wrote:

My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictuhttp://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

You will not be able to duplicate that finish, it looks like
a powder coated factory applied enamel finish...

You have some rust to deal with which you should remove
and spot prime before painting...

What is that white residue all over the latch side of the gate?

Is there something above which is draining/running off onto
the gate ?

Paint black side gate
 

On May 27, 6:00*am, Norminn wrote:
On 5/27/2012 2:14 AM, wrote:

Not sure what the white stuff is..

Oxidized paint or lime deposit from sprinkler? *Oxidized paint might
come off with rubbing compound. Does the haze lie on area with most sun
exposure? *I don't see rust; if there is rust, rub/sand it out, used
rusty metal primer and repaint. *You can rough the rest of the surface
(to repaint), use a brush and Rustoleum enamel. *Should last a good while.





My neighbor have the same type and color side gate, and he recently
had a contractor come to reprint it. Looks very nice. Looks like just
gloss paint or something.

On May 26, 4:51 pm, *wrote:
On May 26, 7:06 pm, *wrote:

My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictuhttp://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

You will not be able to duplicate that finish, it looks like
a powder coated factory applied enamel finish...

You have some rust to deal with which you should remove
and spot prime before painting...

What is that white residue all over the latch side of the gate?

Is there something above which is draining/running off onto
the gate ?- Hide quoted text -

- Show quoted text -

I would clean, let dry, and use black semi-gloss or flat or gloss
spray paint to refinish it.

Paint black side gate
 

On Saturday, May 26, 2012 11:06:49 PM UTC, wrote:
My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictu http://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

I used automotive spray paint. If you are painting it black high temprature black paint like for painting exhaust systems holds up really well.

Jimmie

Paint black side gate
 

On May 27, 2:14*am, " wrote:
Not sure what the white stuff is..

My neighbor have the same type and color side gate, and he recently
had a contractor come to reprint it. Looks very nice. Looks like just
gloss paint or something.

On May 26, 4:51*pm, Evan wrote:







On May 26, 7:06*pm, " wrote:

My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictuhttp://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

You will not be able to duplicate that finish, it looks like
a powder coated factory applied enamel finish...

You have some rust to deal with which you should remove
and spot prime before painting...

What is that white residue all over the latch side of the gate?

Is there something above which is draining/running off onto
the gate ?

It is an outdoor gate, I would use no less than either
a marine grade epoxy paint and the proper prep if you
do it yourself...

You could also look into having a company come
remove the gate, sandblast it down to bare metal
and reapply a powder coat enamel finish at their
paint booth... Looks like the gate unbolts from
the footings and the hinges from the walls...

You won't be able to achieve that kind of finish
in the field...

Paint black side gate
 

JIMMIE wrote:
On Saturday, May 26, 2012 11:06:49 PM UTC, wrote:
My black side iron gate looks rather worn. How do I repaint the gate?
Is it paint or is it some form of black oil stain that is on it? See
pictu http://www.flickr.com/photos/54230006@N07/7262596138/.

Should I use brush or rollers?

Thanks for any tips!

I used automotive spray paint. If you are painting it black high
temprature black paint like for painting exhaust systems holds up really well.

Jimmie

Krylon mountain view color, indoor outdoor acrylic paint sprays are like
enamel auto paints without the hardener required. I thought mountain view
looked similar to the pic. Do you have to do both sides. Might take 4-5
cans .

You could go with paint rollers and outdoor latex, if yo have no rust.

Greg