DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Self-Clean Range Will Not Work (https://www.diybanter.com/home-repair/339934-self-clean-range-will-not-work.html)

[email protected] May 6th 12 06:24 PM

Self-Clean Range Will Not Work
 
We have a ten-year old GE self-cleaning glass-top electric range.
My wife had never used the self-cleaning feature mainly because of the
high electricity consumption (she says).

Anyway, because she is now disabled, leaving me to become chief cook
and bottle-washer, I find that I now need to clean the oven. I
decided I would try the self-cleaning feature to ease my tasks a
little.

Imagine my surprise when I discovered that the cleaning cycle would
only run some 10 minutes before tripping the 220 breaker. When I
reset the breaker, and tried it again, it did the same. Three times
before I quit, fearing that there must be an overload. The breaker is
a 40-amp'er.

I can and did clean the oven manually, with easy-off, and can continue
to do so. But I am wondering why this all happened.

What does everyone think?

xiexie

Wei

Mike Hommes May 6th 12 07:14 PM

Self-Clean Range Will Not Work
 
On 5/6/2012 1:24 PM, wrote:
We have a ten-year old GE self-cleaning glass-top electric range.
My wife had never used the self-cleaning feature mainly because of the
high electricity consumption (she says).

Anyway, because she is now disabled, leaving me to become chief cook
and bottle-washer, I find that I now need to clean the oven. I
decided I would try the self-cleaning feature to ease my tasks a
little.

Imagine my surprise when I discovered that the cleaning cycle would
only run some 10 minutes before tripping the 220 breaker. When I
reset the breaker, and tried it again, it did the same. Three times
before I quit, fearing that there must be an overload. The breaker is
a 40-amp'er.

I can and did clean the oven manually, with easy-off, and can continue
to do so. But I am wondering why this all happened.

What does everyone think?

xiexie

Wei


I'll admit this may be a long shot but I'd start by checking the actual
current draw with a clamp on amp meter.

And while I had the panel cover off, I'd check to make sure the wires at
the breaker were tight. Prolly pull the breaker and check the buss for
signs of overheating as well.



All times are GMT +1. The time now is 02:59 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter