copmression nuts
 

What kind of thread do they use on this copmression nuts?I had to fix
the threads on one,and the 1/8 pipe tap was too small,while th 1/2 was
too big.



http://www.ebay.com/itm/320672095511... 4.m1423.l2649

copmression nuts
 

On Oct 9, 9:36*pm, Sal Bari wrote:
What kind of thread do they use on this copmression nuts?I had to fix
the threads on one,and the 1/8 pipe tap was too small,while th 1/2 was
too big.

http://www.ebay.com/itm/320672095511...WAX:IT&_trksid....

Compression fittings use straight thread not pipe thread.

For 1/4" compression fittings the thread size is typically 7/16" x 20
threads per inch

cheers
Bob

copmression nuts
 

On Oct 9, 9:36*pm, Sal Bari wrote:
What kind of thread do they use on this copmression nuts?I had to fix
the threads on one,and the 1/8 pipe tap was too small,while th 1/2 was
too big.

http://www.ebay.com/itm/320672095511...WAX:IT&_trksid...

Compression fittings use straight thread not pipe thread.

For 1/4" compression fittings the thread size is typically 7/16" x 20
threads per inch

cheers
Bob

Thanks,I've been looking all over the Internet,Home Depot for info
nothing,thank you very much again.