Do they make a 2 hole strap that will support a pipe in a corner
 

The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

Do they make a 2 hole strap that will support a pipe in a corner
 

"Metspitzer" wrote in message
...
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

** No, but Thomas and Betts makes a really nice heavy duty steel, one hole
pipe strap that holds like crazy. Grainger sells them

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 30, 2:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

What size pipe?

Here is a Simpson Strong-Tie pipe corner bracket but its meant for 2"
steel pipe (2-3/8" OD)

http://milo.com/pgtic2-r-pipe-grip-tie-inside-corner.

If your pipe size is smaller perhaps it might fit inside the 2" pipe
and could be secured with screws through the wall of the 2" pipe.

cheers
Bob


cheers
Bob

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

Something like this? You could probably find it at a local fence
supply store

http://www.simplifiedbuilding.com/st...-coupling.html

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. I would be concerned that your
location on a deck rail is not solid enough. What about using a
regular dish wall mount on the side of your deck? Do you need the
elevation at the rail to get over something?

Do they make a 2 hole strap that will support a pipe in a corner
 

On Wed, 30 Mar 2011 22:03:44 -0700 (PDT), DD_BobK
wrote:

On Mar 30, 2:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

What size pipe?

Here is a Simpson Strong-Tie pipe corner bracket but its meant for 2"
steel pipe (2-3/8" OD)

http://milo.com/pgtic2-r-pipe-grip-tie-inside-corner.

If your pipe size is smaller perhaps it might fit inside the 2" pipe
and could be secured with screws through the wall of the 2" pipe.

That looks like it would work perfect. I would guess the pipe is
around 3 inch.

Thanks

Do they make a 2 hole strap that will support a pipe in a corner
 

On Thu, 31 Mar 2011 03:31:26 -0700 (PDT), Mikepier
wrote:

On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

Something like this? You could probably find it at a local fence
supply store

http://www.simplifiedbuilding.com/st...-coupling.html

Thanks

Do they make a 2 hole strap that will support a pipe in a corner
 

On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc
wrote:

On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. I would be concerned that your
location on a deck rail is not solid enough. What about using a
regular dish wall mount on the side of your deck? Do you need the
elevation at the rail to get over something?

Yep. The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 31, 1:24*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc





wrote:
On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. *I would be concerned that your
location on a deck rail is not solid enough. *What about using a
regular dish wall mount on the side of your deck? *Do you need the
elevation at the rail to get over something?

Yep. *The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -

- Show quoted text -

Well if the corner is pretty solid then I guess that's your other
option. Nothing available on the corners of the house?

The installation guy should have pipe. They bury it with concrete for
free standing installations. He'll change you extra for the pipe.
I've heard there is an exhaust pipe size that matches but you'll
stoill have to buy it and it will need paint too.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 31, 1:22*pm, Metspitzer wrote:
On Wed, 30 Mar 2011 22:03:44 -0700 (PDT), DD_BobK
wrote:





On Mar 30, 2:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

What size pipe?

Here is a Simpson Strong-Tie pipe corner bracket but its meant for 2"
steel pipe (2-3/8" OD)

http://milo.com/pgtic2-r-pipe-grip-tie-inside-corner.

If your pipe size is smaller perhaps it might fit inside the 2" pipe
and could be secured with screws through the wall of the 2" pipe.

That looks like it would work perfect. *I would guess the pipe is
around 3 inch.

Thanks- Hide quoted text -

- Show quoted text -

How would it work "perfect" if it's made for a 2" pipe and your pipe
is 3"?

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 31, 1:50*pm, DerbyDad03 wrote:
On Mar 31, 1:22*pm, Metspitzer wrote:





On Wed, 30 Mar 2011 22:03:44 -0700 (PDT), DD_BobK
wrote:

On Mar 30, 2:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

What size pipe?

Here is a Simpson Strong-Tie pipe corner bracket but its meant for 2"
steel pipe (2-3/8" OD)

http://milo.com/pgtic2-r-pipe-grip-tie-inside-corner.

If your pipe size is smaller perhaps it might fit inside the 2" pipe
and could be secured with screws through the wall of the 2" pipe.

That looks like it would work perfect. *I would guess the pipe is
around 3 inch.

Thanks- Hide quoted text -

- Show quoted text -

How would it work "perfect" if it's made for a 2" pipe and your pipe
is 3"?- Hide quoted text -

- Show quoted text -

If he's doing an hd dish the pipe size is 2" od.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Thu, 31 Mar 2011 10:50:55 -0700 (PDT), DerbyDad03
wrote:

On Mar 31, 1:22*pm, Metspitzer wrote:
On Wed, 30 Mar 2011 22:03:44 -0700 (PDT), DD_BobK
wrote:





On Mar 30, 2:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

What size pipe?

Here is a Simpson Strong-Tie pipe corner bracket but its meant for 2"
steel pipe (2-3/8" OD)

http://milo.com/pgtic2-r-pipe-grip-tie-inside-corner.

If your pipe size is smaller perhaps it might fit inside the 2" pipe
and could be secured with screws through the wall of the 2" pipe.

That looks like it would work perfect. *I would guess the pipe is
around 3 inch.

Thanks- Hide quoted text -

- Show quoted text -

How would it work "perfect" if it's made for a 2" pipe and your pipe
is 3"?

Perfect "type" strap.
Thanks

Do they make a 2 hole strap that will support a pipe in a corner
 

On Thu, 31 Mar 2011 10:47:05 -0700 (PDT), jamesgangnc
wrote:

On Mar 31, 1:24*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc





wrote:
On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. *I would be concerned that your
location on a deck rail is not solid enough. *What about using a
regular dish wall mount on the side of your deck? *Do you need the
elevation at the rail to get over something?

Yep. *The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -

- Show quoted text -

Well if the corner is pretty solid then I guess that's your other
option. Nothing available on the corners of the house?

The installation guy should have pipe. They bury it with concrete for
free standing installations. He'll change you extra for the pipe.
I've heard there is an exhaust pipe size that matches but you'll
stoill have to buy it and it will need paint too.

I didn't want it attached to the house. I am told that they can put
some very large stresses by catching the wind.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 31, 3:09*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 10:47:05 -0700 (PDT), jamesgangnc





wrote:
On Mar 31, 1:24*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc

wrote:
On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio.. I
wanted it mounted in the corner where the rails meet at a 90 degree..
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. *I would be concerned that your
location on a deck rail is not solid enough. *What about using a
regular dish wall mount on the side of your deck? *Do you need the
elevation at the rail to get over something?

Yep. *The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -

- Show quoted text -

Well if the corner is pretty solid then I guess that's your other
option. *Nothing available on the corners of the house?

The installation guy should have pipe. *They bury it with concrete for
free standing installations. *He'll change you extra for the pipe.
I've heard there is an exhaust pipe size that matches but you'll
stoill have to buy it and it will need paint too.

I didn't want it attached to the house. *I am told that they can put
some very large stresses by catching the wind.- Hide quoted text -

- Show quoted text -

Are you sure that the railing can handle the stresses that you are
afraid to apply to the house?

Not only will the strength of the railing need to be considered, but
your mounting method also.

As I'm sure you are aware, the entire mounting "system" has to be able
to handle the stresses.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Mar 31, 3:09*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 10:47:05 -0700 (PDT), jamesgangnc





wrote:
On Mar 31, 1:24*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc

wrote:
On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio.. I
wanted it mounted in the corner where the rails meet at a 90 degree..
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. *I would be concerned that your
location on a deck rail is not solid enough. *What about using a
regular dish wall mount on the side of your deck? *Do you need the
elevation at the rail to get over something?

Yep. *The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -

- Show quoted text -

Well if the corner is pretty solid then I guess that's your other
option. *Nothing available on the corners of the house?

The installation guy should have pipe. *They bury it with concrete for
free standing installations. *He'll change you extra for the pipe.
I've heard there is an exhaust pipe size that matches but you'll
stoill have to buy it and it will need paint too.

I didn't want it attached to the house. *I am told that they can put
some very large stresses by catching the wind.- Hide quoted text -

- Show quoted text -

Millions of people mount them on the house. I have mine mounted on
the corner boards at the right rear corner of the house about 16 feet
up. Use long lag screws on the main pipe mount so some of them will
get through the sheathing to the framing lumber. The hd dishes come
with two stabilizing arms. Make sure you installer mounts those as
well. They do not need to hit frame, just screwed into the siding and
underlayment or corner board is enough. Mine's been up for 2 years.
Generally one rear corner or another on the house up a ways is fairly
unobtrusive. Certainly a lot less of an eyesore than mounted on the
railing corner of a deck.

Do they make a 2 hole strap that will support a pipe in a corner
 

On Thu, 31 Mar 2011 12:40:36 -0700 (PDT), jamesgangnc
wrote:

On Mar 31, 3:09*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 10:47:05 -0700 (PDT), jamesgangnc





wrote:
On Mar 31, 1:24*pm, Metspitzer wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc

wrote:
On Mar 30, 5:02*pm, Metspitzer wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. *I would be concerned that your
location on a deck rail is not solid enough. *What about using a
regular dish wall mount on the side of your deck? *Do you need the
elevation at the rail to get over something?

Yep. *The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -

- Show quoted text -

Well if the corner is pretty solid then I guess that's your other
option. *Nothing available on the corners of the house?

The installation guy should have pipe. *They bury it with concrete for
free standing installations. *He'll change you extra for the pipe.
I've heard there is an exhaust pipe size that matches but you'll
stoill have to buy it and it will need paint too.

I didn't want it attached to the house. *I am told that they can put
some very large stresses by catching the wind.- Hide quoted text -

- Show quoted text -

Millions of people mount them on the house. I have mine mounted on
the corner boards at the right rear corner of the house about 16 feet
up. Use long lag screws on the main pipe mount so some of them will
get through the sheathing to the framing lumber. The hd dishes come
with two stabilizing arms. Make sure you installer mounts those as
well. They do not need to hit frame, just screwed into the siding and
underlayment or corner board is enough. Mine's been up for 2 years.
Generally one rear corner or another on the house up a ways is fairly
unobtrusive. Certainly a lot less of an eyesore than mounted on the
railing corner of a deck.

Here is a picture of my house.
http://img820.imageshack.us/i/0078i.jpg/

The lower left corner is aimed almost directly at the satellite. I
don't think I could have used a corner on the back. I think the deck
is a better place than the front yard.

It is a done deal now anyway. I have had a HDTV for 2 years now. It
is time I had HD channels.

Do they make a 2 hole strap that will support a pipe in a corner
 

On 3/31/2011 5:38 PM, Metspitzer wrote:
On Thu, 31 Mar 2011 12:40:36 -0700 (PDT), jamesgangnc
wrote:

On Mar 31, 3:09 pm, wrote:
On Thu, 31 Mar 2011 10:47:05 -0700 (PDT), jamesgangnc





wrote:
On Mar 31, 1:24 pm, wrote:
On Thu, 31 Mar 2011 04:35:18 -0700 (PDT), jamesgangnc

wrote:
On Mar 30, 5:02 pm, wrote:
The location we decided on for my new TV dish was on the back patio. I
wanted it mounted in the corner where the rails meet at a 90 degree.
Do they make a 2 hole pipe/pole strap that will allow you to screw the
strap to the inside rail?

--
O'Neil to General Hammond:
For the record Sir, I wanted to blow it the hell up.

The oval dishes for hd are pretty heavy and dishes need to be pretty
rigid to get the maximum signal. I would be concerned that your
location on a deck rail is not solid enough. What about using a
regular dish wall mount on the side of your deck? Do you need the
elevation at the rail to get over something?

Yep. The install guy tried to mount it to the side of the deck even
after telling me he thought it was too low.- Hide quoted text -
(snip)

It is a done deal now anyway. I have had a HDTV for 2 years now. It
is time I had HD channels.

What, no locals close enough to hit with rabbit ears? OTA HD is sharper
than Dish HD anyway. I have seriously been thinking about planting an
antenna pole through my deck (as a stabilizer), to hold a big yagi.
Mount a bracket and thumbscrew at a convenient height, so I don't have
to screw with wiring up a rotator- just step out the sliding door and
turn the handle to the correct index mark. My existing OTA antenna is
falling apart, and mounted to a wooden chimney that is also falling
apart, and the apple tree keeps trying to mate with it.

Said wooden chimney is also getting flexible enough, that in high wind,
my Dish that is mounted to it flutters, and I lose lock on the bird for
several minutes.

--
aem sends...