Understanding a Recoil Starter
 

I recently had a recoil starter on a very old Tecumseh fly apart, that
is, the screw that held the dog housing loosened up and fell out. All
the parts were retrieved, and I reassembled the parts in the housing.
The dog doesn't engage the starter cup now and I wonder if I
misassembled the unit. At rest, the dog is retracted into the housing.
If I manually turn the housing, the dog ejects. When released, the dog
retracts (under spring tension) back into the housing.
Can someone tell me if this sounds correct? I assumed that when the
rope is pulled, the dog should eject by centrifugal force (overcoming
spring tension) and engage the teeth on the cup. This isn't
happening.
What is wrong?
Many thanks for help.
Frank

Understanding a Recoil Starter
 

On Jun 15, 10:21*pm, frank1492 wrote:
I recently had a recoil starter on a very old Tecumseh fly apart, that
is, the screw that held the dog housing loosened up and fell out. All
the parts were retrieved, and I reassembled the parts in the housing.
* * The dog doesn't engage the starter cup now and I wonder if I
misassembled the unit. At rest, the dog is retracted into the housing.
If I manually turn the housing, the dog ejects. When released, the dog
retracts (under spring tension) back into the housing.
* *Can someone tell me if this sounds correct? I assumed that when the
rope is pulled, the dog should eject by centrifugal force (overcoming
spring tension) *and engage the teeth on the cup. This isn't
happening.
* * What is wrong?
* * Many thanks for help.
* * * * *Frank

==
Google recoil starter repair. Lots of good stuff for repair. I did and
repair was perfect.
==

Understanding a Recoil Starter
 

On Jun 16, 12:21�am, frank1492 wrote:
I recently had a recoil starter on a very old Tecumseh fly apart, that
is, the screw that held the dog housing loosened up and fell out. All
the parts were retrieved, and I reassembled the parts in the housing.
� � The dog doesn't engage the starter cup now and I wonder if I
misassembled the unit. At rest, the dog is retracted into the housing.
If I manually turn the housing, the dog ejects. When released, the dog
retracts (under spring tension) back into the housing.
� �Can someone tell me if this sounds correct? I assumed that when the
rope is pulled, the dog should eject by centrifugal force (overcoming
spring tension) �and engage the teeth on the cup. This isn't
happening.
� � What is wrong?
� � Many thanks for help.
� � � � �Frank

It sounds like you did it right. But, you may be assembling it upside
down.

Hank