Not electrocuted
 

Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). Finally got a friend to press the doorbell while I threw
successive breakers. After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! How sweet it is! I could stand out there
all day and push the lighted button.

Not electrocuted
 

On Jan 11, 1:45�am, Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). �Finally got a friend to press the doorbell while I threw
successive breakers. �After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! �How sweet it is! �I could stand out there
all day and push the lighted button.

Congrats! I still remember the feeling I had when I first replaced a
breaker. It sent a ****-shiver down my spine. :-)

Hank ~~~still cautious

Not electrocuted
 

Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). Finally got a friend to press the doorbell while I threw
successive breakers. After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! How sweet it is! I could stand out there
all day and push the lighted button.

Uh, the 12 volts on a doorbell circuit wouldn't electrocute anything.

Not electrocuted
 

On Jan 11, 6:05*am, "HeyBub" wrote:
Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). *Finally got a friend to press the doorbell while I threw
successive breakers. *After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! *How sweet it is! *I could stand out there
all day and push the lighted button.

Uh, the 12 volts on a doorbell circuit wouldn't electrocute anything.

Yes, low-voltage...that why it's used where you might stand in a
puddle and press it, Homer! ; )

Not electrocuted
 

We had every confidence in you. You serve as an example for
people less skilled. Thank you for writing.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Higgs Boson" wrote in message
...
Earlier I posted some dumb questions about installing a new
doorbell
(have hated forever the cheapo that was there when I bought
the
place). Finally got a friend to press the doorbell while I
threw
successive breakers. After isolating the right one,
I boldly went where this klutz has never gone before, and
installed a
handsome new doorbell!!! How sweet it is! I could stand
out there
all day and push the lighted button.

Not electrocuted
 

That brings back memories of sanding some contacts in a
panel box. Working by flash light, while a friend held the
100 amp feed breaker aside so I could work. Talk about
trusting someone.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Hustlin' Hank" wrote in message
...

Congrats! I still remember the feeling I had when I first
replaced a
breaker. It sent a ****-shiver down my spine. :-)

Hank ~~~still cautious

Not electrocuted
 

16 VAC, typically, and shhh.... let him revel in success.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"HeyBub" wrote in message
m...

Uh, the 12 volts on a doorbell circuit wouldn't electrocute
anything.

Not electrocuted
 

Mmmm... burgers!

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Bob Villa" wrote in message
...

Uh, the 12 volts on a doorbell circuit wouldn't
electrocute anything.

Yes, low-voltage...that why it's used where you might stand
in a
puddle and press it, Homer! ; )

Not electrocuted
 

On Mon, 11 Jan 2010 06:05:51 -0600, "HeyBub"
wrote:

Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). Finally got a friend to press the doorbell while I threw
successive breakers. After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! How sweet it is! I could stand out there
all day and push the lighted button.

Uh, the 12 volts on a doorbell circuit wouldn't electrocute anything.


It's "supposed" to be 16V, although I've measured 18V. A short can
destroy the transformer.

Not electrocuted
 

On Jan 11, 8:17*pm, Gary H wrote:
On Mon, 11 Jan 2010 06:05:51 -0600, "HeyBub"
wrote:

Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). *Finally got a friend to press the doorbell while I threw
successive breakers. *After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! *How sweet it is! *I could stand out there
all day and push the lighted button.

Uh, the 12 volts on a doorbell circuit wouldn't electrocute anything.

It's "supposed" to be 16V, although I've measured 18V. A short can
destroy the transformer.

Some are even as high as 24V AC

Not electrocuted
 

On Jan 12, 2:14*am, terry wrote:
On Jan 11, 11:17*pm, Gary H wrote:





On Mon, 11 Jan 2010 06:05:51 -0600, "HeyBub"
wrote:

Higgs Boson wrote:
Earlier I posted some dumb questions about installing a new doorbell
(have hated forever the cheapo that was there when I bought the
place). *Finally got a friend to press the doorbell while I threw
successive breakers. *After isolating the right one,
I boldly went where this klutz has never gone before, and installed a
handsome new doorbell!!! *How sweet it is! *I could stand out there
all day and push the lighted button.

Uh, the 12 volts on a doorbell circuit wouldn't electrocute anything.

It's "supposed" to be 16V, although I've measured 18V. A short can
destroy the transformer.

Even a 'stuck' door push can cause transformer burn out!
We have a relative, who mentioned that their door chime "Had been
buzzing for while but had now stopped"! Could I have look?
Found:
a) Transformer open, can't remember if it was primary or secondary.
Zero output.
b) Door bell push, exposed to weather, jammed in, making contact all
the time.
c) Can't recall exactly what, but also seem to recall something wrong
with the chime.
Fortunately had used parts; therefore no cost!- Hide quoted text -

- Show quoted text -

"Fortunately had used parts; therefore no cost! "

For years my two-tone doorbell went BONK! instead of diiiiiing -
dooooong.

The solenoid was supposed to fire up for diiiiiing and then down for
dooooong.

It only fired up, so there was no chance of a dooooong.

The rubber grommets that the upper bar was supposed to float on were
shot, so the bar wouldn't vibrate.

When you pushed the button the solenoid would hit the upper bar and
just go BONK.

At some point I was bored and fixed it with some lube and a homemade
grommet. No cost and about a 1/2 hour's work.