|
remove ceiling "popcorn" from sandblasted glass?
We have an exterior entry door with several leaded glass panels - the leaded
glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! |
remove ceiling "popcorn" from sandblasted glass?
"DanG" wrote in message ... Warm water and a soft bristle brush. And let it sit long enough to get very soft. |
remove ceiling "popcorn" from sandblasted glass?
"Steve B" wrote in message ... "DanG" wrote in message ... Warm water and a soft bristle brush. And let it sit long enough to get very soft. Ditto...Be patient....Use a spray bottle...Hit with the warm water mist as many times it takes to soften up...Good luck.... |
remove ceiling "popcorn" from sandblasted glass?
"TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww |
remove ceiling "popcorn" from sandblasted glass?
On Dec 26, 1:02*pm, "WW" wrote:
"TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? *The leaded glass won't take a lot of scraping or pressure. *THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. |
remove ceiling "popcorn" from sandblasted glass?
On Sat, 26 Dec 2009 11:44:19 -0800 (PST), "hr(bob) "
wrote: Paint remover very carefully applied. OP, Do not use paint remover. |
remove ceiling "popcorn" from sandblasted glass?
Warm water and a soft bristle brush.
-- ______________________________ Keep the whole world singing . . . . DanG (remove the sevens) "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! |
remove ceiling "popcorn" from sandblasted glass?
"Oren" wrote in message ... On Sat, 26 Dec 2009 11:44:19 -0800 (PST), "hr(bob) " wrote: Paint remover very carefully applied. OP, Do not use paint remover. Ditto...Use warm water.... |
remove ceiling "popcorn" from sandblasted glass?
On Dec 26, 2:05*pm, Oren wrote:
On Sat, 26 Dec 2009 11:44:19 -0800 (PST), "hr(bob) " wrote: Paint remover very carefully applied. OP, Do not use paint remover. Why not? I have done leaded glass work and would use paint remover in that situation. I would be very worried about using anything water- containing on the door if I was going to re-paint it as the water will get into the wood and cause problems, while the paint remover will soften the paint so it can easily be scraped off the glass. |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Dec 26, 5:04*pm, "Steve B" wrote:
"hr(bob) " wrote in message ... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. *Idiot. *It's water based. *Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - |
remove ceiling "popcorn" from sandblasted glass?
On Dec 26, 5:04*pm, "Steve B" wrote:
"hr(bob) " wrote in message ... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. *Idiot. *It's water based. *Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Dec 26, 9:08*pm, "Steve B" wrote:
"hr(bob) " wrote in message ... On Dec 26, 5:04 pm, "Steve B" wrote: "hr(bob) " wrote in message .... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. Idiot. It's water based. Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? *I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. reply: *I don't believe I have ever seen "popcorn" that wasn't water based drywall mud paste with styrofoam additives. *I could be wrong, though. *I was once before, too. Steve- Hide quoted text - - Show quoted text - Well, that doesn't make me an idiot or a doofus! |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Dec 27, 12:22*am, "benick" wrote:
"hr(bob) " wrote in message ... On Dec 26, 9:08 pm, "Steve B" wrote: "hr(bob) " wrote in message ... On Dec 26, 5:04 pm, "Steve B" wrote: "hr(bob) " wrote in message .... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. Idiot. It's water based. Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. reply: I don't believe I have ever seen "popcorn" that wasn't water based drywall mud paste with styrofoam additives. I could be wrong, though. I was once before, too. Steve- Hide quoted text - - Show quoted text - Well, that doesn't make me an idiot or a doofus! Yes it does....If the OP listened to your stupid advice he would be re-painting trim as well.....Popcorn is made with joint compound , texture spray mix , water and white flat wall paint...ALL water washable....- Hide quoted text - - Show quoted text - I guess I'm confused. Why would the OP HAVE to repaint the trim if he appplied the paint remover only to the glass? I said in the original response to apply the paint remover carefully. The OP also said that they were going to repaint anyway. Read the original post if you don't believe me. |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Dec 27, 1:30*pm, "benick" wrote:
"hr(bob) " wrote in message ... On Dec 27, 12:22 am, "benick" wrote: "hr(bob) " wrote in message .... On Dec 26, 9:08 pm, "Steve B" wrote: "hr(bob) " wrote in message .... On Dec 26, 5:04 pm, "Steve B" wrote: "hr(bob) " wrote in message ... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. Idiot. It's water based. Water dissolves it.. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. reply: I don't believe I have ever seen "popcorn" that wasn't water based drywall mud paste with styrofoam additives. I could be wrong, though. I was once before, too. Steve- Hide quoted text - - Show quoted text - Well, that doesn't make me an idiot or a doofus! Yes it does....If the OP listened to your stupid advice he would be re-painting trim as well.....Popcorn is made with joint compound , texture spray mix , water and white flat wall paint...ALL water washable....- Hide quoted text - - Show quoted text - I guess I'm confused. *Why would the OP HAVE to repaint the trim if he appplied the paint remover only to the glass? *I said in the original response to apply the paint remover carefully. *The OP also said that they were going to repaint anyway. *Read the original post if you don't believe me. Yes you are confused and an idiot...- Hide quoted text - - Show quoted text - But I have a 5-star rating and you only have 2 stars so some people must think I am not confused and an idiot. |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Mon, 28 Dec 2009 02:46:48 -0600, "DanG" wrote:
Bob?, let off will you? The stuff is a water soluble goop with ground up corn cobs to make little lumps. When it gets wet, it falls off. There is no paint, there is no need for paint remover, paint remover is way way overkill unless there was a paint problem, paint remover doesn't do a good job of softening or removing latex enamels anyway. Forget the paint remover. Once I read that actual *popcorn* was fastened to the ceiling. Maybe they varnished it :-/ |
remove ceiling "popcorn" from sandblasted glass?
On Dec 27, 7:35*pm, "benick" wrote:
"hr(bob) " wrote in message ... On Dec 27, 1:30 pm, "benick" wrote: "hr(bob) " wrote in message .... On Dec 27, 12:22 am, "benick" wrote: "hr(bob) " wrote in message .... On Dec 26, 9:08 pm, "Steve B" wrote: "hr(bob) " wrote in message ... On Dec 26, 5:04 pm, "Steve B" wrote: "hr(bob) " wrote in message ... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. Idiot. It's water based. Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. reply: I don't believe I have ever seen "popcorn" that wasn't water based drywall mud paste with styrofoam additives. I could be wrong, though. I was once before, too. Steve- Hide quoted text - - Show quoted text - Well, that doesn't make me an idiot or a doofus! Yes it does....If the OP listened to your stupid advice he would be re-painting trim as well.....Popcorn is made with joint compound , texture spray mix , water and white flat wall paint...ALL water washable....- Hide quoted text - - Show quoted text - I guess I'm confused. Why would the OP HAVE to repaint the trim if he appplied the paint remover only to the glass? I said in the original response to apply the paint remover carefully. The OP also said that they were going to repaint anyway. Read the original post if you don't believe me. Yes you are confused and an idiot...- Hide quoted text - - Show quoted text - But I have a 5-star rating and you only have 2 stars so some people must think I am not confused and an idiot. That's not what your wife said...JUST KIDDING..Sorry couldn't resist that easy comeback....LOL....What the heck are you talking about ???- Hide quoted text - - Show quoted text - Click on "profile" on a message you posted and see how many stars you have on your rating. Then click on "profile" on any of my postings and see how many stars I have. |
remove ceiling "popcorn" from sandblasted glass?
On Dec 28, 2:46*am, "DanG" wrote:
Bob?, let off will you? *The stuff is a water soluble goop with ground up corn cobs to make little lumps. *When it gets wet, it falls off. *There is no paint, there is no need for paint remover, paint remover is way way overkill unless there was a paint problem, paint remover doesn't do a good job of softening or removing latex enamels anyway. *Forget the paint remover. -- ______________________________ Keep the whole world singing . . . . DanG *(remove the sevens) "hr(bob) " wrote in message ... On Dec 27, 12:22 am, "benick" wrote: "hr(bob) " wrote in message .... On Dec 26, 9:08 pm, "Steve B" wrote: "hr(bob) " wrote in message .... On Dec 26, 5:04 pm, "Steve B" wrote: "hr(bob) " wrote in message ... On Dec 26, 1:02 pm, "WW" wrote: "TNSTAAFL" wrote in message ... We have an exterior entry door with several leaded glass panels - the leaded glass is sandblasted - the glass panels picked up some overspray when we were having the entryway area remodeled - we'll be re-painting the wood sections of the door, but before we do that, what's the best way to remove the "popcorn" material from the glass sections? The leaded glass won't take a lot of scraping or pressure. THANKS! What Dan and benick said. ww- Hide quoted text - - Show quoted text - Paint remover very carefully applied. reply: DON'T EVEN CONSIDER IT. Idiot. It's water based. Water dissolves it. There is no way to "carefully" apply paint remover. Doofus.- Hide quoted text - - Show quoted text - Where does the OP say the overspray was water-based?? I have applied paint remover using a paint brush to do almost exactly what the OP proposes to do. reply: I don't believe I have ever seen "popcorn" that wasn't water based drywall mud paste with styrofoam additives. I could be wrong, though. I was once before, too. Steve- Hide quoted text - - Show quoted text - Well, that doesn't make me an idiot or a doofus! Yes it does....If the OP listened to your stupid advice he would be re-painting trim as well.....Popcorn is made with joint compound , texture spray mix , water and white flat wall paint...ALL water washable....- Hide quoted text - - Show quoted text - I guess I'm confused. *Why would the OP HAVE to repaint the trim if he appplied the paint remover only to the glass? *I said in the original response to apply the paint remover carefully. *The OP also said that they were going to repaint anyway. *Read the original post if you don't believe me.- Hide quoted text - - Show quoted text - If the "popcorn" is really put on with a water-soluble matrix, then just water/soapy water will work. But the OP didn't say exactly what had been used and there are several types of"popcorn" ceiling. |
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
|
remove ceiling "popcorn" from sandblasted glass?
On Sun, 27 Dec 2009 19:59:23 -0800 (PST), "hr(bob) "
wrote: -snip 116 lines of gobbledygook- Click on "profile" on a message you posted and see how many stars you have on your rating. Then click on "profile" on any of my postings and see how many stars I have. I'm getting oh so tempted to join the folks who killfile all of google-groups. But I think I'll stick to whacking them one at a time for now. . . Jim |
remove ceiling "popcorn" from sandblasted glass?
"Jim Elbrecht" wrote in message ... On Sun, 27 Dec 2009 19:59:23 -0800 (PST), "hr(bob) " wrote: -snip 116 lines of gobbledygook- Click on "profile" on a message you posted and see how many stars you have on your rating. Then click on "profile" on any of my postings and see how many stars I have. I'm getting oh so tempted to join the folks who killfile all of google-groups. But I think I'll stick to whacking them one at a time for now. . . Jim Ahhh...Google Groups...I shoud have known by his asinine answer of using paint remover....Nuff said... |
remove ceiling "popcorn" from sandblasted glass?
"Jim Elbrecht" wrote But I think I'll stick to whacking them one at a time for now. . . Jim There are actually a few who do have some good things to say. You might just mention to them regarding top posting, and snipping. For some people, google is chosen for a variety of reasons, and that's another whole thread. I have a one strike and you're out policy. Some foul mouth or idiot will get killfiled after one post. For others who diverse into politics, or who rant, or who just don't know what they are talking about, it's a few times. But don't throw the baby out with the wash water. Steve |
| All times are GMT +1. The time now is 01:44 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter