DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   String Trimmer Problem (https://www.diybanter.com/home-repair/276686-string-trimmer-problem.html)

Michael Dobony April 25th 09 11:37 PM

String Trimmer Problem
 
My daughter's 4 cycle string trimmer seems to be locked up. You can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its a
Troy-Bilt.

Mike D.

Nate Nagel April 26th 09 12:03 AM

String Trimmer Problem
 
Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its a
Troy-Bilt.

Mike D.


Wasp nest in the exhaust?

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel

Don Young April 26th 09 02:43 AM

String Trimmer Problem
 

"Michael Dobony" wrote in message
...
My daughter's 4 cycle string trimmer seems to be locked up. You can't
pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its
a
Troy-Bilt.

Mike D.

One or both valves stuck closed will result in NO compression, not increased
compression. The common cause of your symptoms is hydraulic lock, oil and/or
liquid gasoline in the cylinder. It can also be caused by an incorrect (too
long) spark plug fouling the piston top. An excessive carbon build-up can
increase compression but cannot cause lockup which is relieved by removing
the spark plug. Try turning the engine over with a finger over the plug hole
to generate slight compression and this should give you a pretty good idea
what is wrong.

Your engine might be equipped with a starting compression release which is
malfunctioning.

Don Young



Tony Hwang April 26th 09 05:48 AM

String Trimmer Problem
 
Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its a
Troy-Bilt.

Mike D.

Hi,
4 cycle on a string trimmer? It must be pretty heavy one!

Michael Dobony April 26th 09 02:15 PM

String Trimmer Problem
 
On Sat, 25 Apr 2009 20:43:02 -0500, Don Young wrote:

"Michael Dobony" wrote in message
...
My daughter's 4 cycle string trimmer seems to be locked up. You can't
pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its
a
Troy-Bilt.

Mike D.

One or both valves stuck closed will result in NO compression, not increased
compression. The common cause of your symptoms is hydraulic lock, oil and/or
liquid gasoline in the cylinder. It can also be caused by an incorrect (too
long) spark plug fouling the piston top. An excessive carbon build-up can
increase compression but cannot cause lockup which is relieved by removing
the spark plug. Try turning the engine over with a finger over the plug hole
to generate slight compression and this should give you a pretty good idea
what is wrong.

Your engine might be equipped with a starting compression release which is
malfunctioning.

Don Young


Yup, hydraulic lock. His neighbor told him that yesterday. He told me
about it late last night. He took the spark plug out and pulled like
crazy, put the spark plug back in and it is running again.

Michael Dobony April 26th 09 02:16 PM

String Trimmer Problem
 
On Sat, 25 Apr 2009 21:48:30 -0700, Tony Hwang wrote:

Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its a
Troy-Bilt.

Mike D.

Hi,
4 cycle on a string trimmer? It must be pretty heavy one!


Not much heavier than a similar sized 2 cycle engine.

Michael Dobony April 26th 09 02:33 PM

String Trimmer Problem
 
On Sat, 25 Apr 2009 21:48:30 -0700, Tony Hwang wrote:

Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW, its a
Troy-Bilt.

Mike D.

Hi,
4 cycle on a string trimmer? It must be pretty heavy one!


13 lbs.
http://www.troybilt.com/webapp/wcs/s...92359_55009_-1

The 2 cycle equivalent is also 13 lbs.
http://www.troybilt.com/webapp/wcs/s...10149_55008_-1

ransley April 26th 09 03:26 PM

String Trimmer Problem
 
On Apr 25, 5:37*pm, Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. *You can't pull
the cord at all. *With the spark plug out it pulls okay. *My thought is
valves stuck closed. Any other ideas for excessive compression? *BTW, its a
Troy-Bilt.

Mike D.


You must have flooded it unless it has some sort of compression
release system, but it should still pull, if valve was open it would
have no compression.

Steve Barker[_5_] April 26th 09 06:46 PM

String Trimmer Problem
 
Tony Hwang wrote:
Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You can't
pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW,
its a
Troy-Bilt.

Mike D.

Hi,
4 cycle on a string trimmer? It must be pretty heavy one!


the stihl 4-mix units are about 13 ounces heavier than their smoker
counter parts in the same size. but well worth it. Either way, you're
going to be using a shoulder strap, so it doesn't really matter. You
have a unit that will last forever, is quiet, and doesn't smoke like a
dodge truck.

s

E Z Peaces April 27th 09 04:38 PM

String Trimmer Problem
 
Steve Barker wrote:
Tony Hwang wrote:
Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. You
can't pull
the cord at all. With the spark plug out it pulls okay. My thought is
valves stuck closed. Any other ideas for excessive compression? BTW,
its a
Troy-Bilt.

Mike D.

Hi,
4 cycle on a string trimmer? It must be pretty heavy one!


the stihl 4-mix units are about 13 ounces heavier than their smoker
counter parts in the same size. but well worth it. Either way, you're
going to be using a shoulder strap, so it doesn't really matter. You
have a unit that will last forever, is quiet, and doesn't smoke like a
dodge truck.

s


I got my first string trimmer in 1976. It was great for trimming 300
tombstones. In 1982 I got one to keep clear half a mile of electric
fence less than a foot off the grass. It wasn't easy.

So I got a 17-pound Hoffco from Troybuilt. I think Hoffco claimed to
have invented the string trimmer, in the 1940s. It had a shoulder strap
and handlebars nearly a yard wide. It made trimming almost as quick and
easy as walking past.

Nowadays I use it for three yards, which have about half a mile of
trimming. It's going strong after 25 years except the plastic spool.
If it fails, I'll need one to fit. I wish I knew where to find the
dimensions of modern spools.

Over the years I've tried several other trimmers. None has the wide
handlebars of the Hoffco. Those handlebars mean precise control against
the pull of the line. The Hoffco is also less fatiguing than anything
else I've tried.

How come they don't make 'em like that anymore?

ransley April 27th 09 05:36 PM

String Trimmer Problem
 
On Apr 27, 10:38*am, E Z Peaces wrote:
Steve Barker wrote:
Tony Hwang wrote:
Michael Dobony wrote:
My daughter's 4 cycle string trimmer seems to be locked up. *You
can't pull
the cord at all. *With the spark plug out it pulls okay. *My thought is
valves stuck closed. Any other ideas for excessive compression? *BTW,
its a
Troy-Bilt.


Mike D.
Hi,
4 cycle on a string trimmer? It must be pretty heavy one!


the stihl 4-mix units are about 13 ounces heavier than their smoker
counter parts in the same size. *but well worth it. *Either way, you're
going to be using a shoulder strap, so it doesn't really matter. *You
have a unit that will last forever, is quiet, and doesn't smoke like a
dodge truck.


s


I got my first string trimmer in 1976. *It was great for trimming 300
tombstones. *In 1982 I got one to keep clear half a mile of electric
fence less than a foot off the grass. *It wasn't easy.

So I got a 17-pound Hoffco from Troybuilt. *I think Hoffco claimed to
have invented the string trimmer, in the 1940s. *It had a shoulder strap
and handlebars nearly a yard wide. *It made trimming almost as quick and
easy as walking past.

Nowadays I use it for three yards, which have about half a mile of
trimming. *It's going strong after 25 years except the plastic spool.
If it fails, I'll need one to fit. *I wish I knew where to find the
dimensions of modern spools.

Over the years I've tried several other trimmers. *None has the wide
handlebars of the Hoffco. *Those handlebars mean precise control against
the pull of the line. *The Hoffco is also less fatiguing than anything
else I've tried.

How come they don't make 'em like that anymore?- Hide quoted text -

- Show quoted text -


We have roundup now.

SteveBell[_2_] April 28th 09 02:39 AM

String Trimmer Problem
 

How come they don't make 'em like that anymore?


Same reason they don't make much of *anything* like that anymore.
Stupid consumers want everything absolutely as cheap as possible, and
stupid manufacturers want you to buy a new whatever every couple of
years.

--
Steve Bell
New Life Home Improvement
Arlington, TX USA

E Z Peaces April 28th 09 10:26 PM

String Trimmer Problem
 
SteveBell wrote:
How come they don't make 'em like that anymore?


Same reason they don't make much of *anything* like that anymore.
Stupid consumers want everything absolutely as cheap as possible, and
stupid manufacturers want you to buy a new whatever every couple of
years.

If I had first seen the Hoffco in a store with other brands of similar
prices, I would have thought the Hoffco was of lower quality.

The carburetor lacks a squeeze bulb for cold starting.

It's less powerful than is typical of a large trimmer. (The power is
adequate, and more power may have meant a shorter motor life.)

Its driveshaft is a flexible cable. (The cable has held up fine and may
mean less weight at the head.)

The most important feature is the wide handlebars. I don't know why I
don't see it on other trimmers. I wouldn't try to control a motorcycle
or a manual scythe with my hands as close as the grips on most trimmers.
Wide handlebars allow my to trim along a fence without beating up
the line, to trim close to flowers with confidence, and to cut a wide
swath across a field without fatigue.

Don Young April 29th 09 02:34 AM

String Trimmer Problem
 

"E Z Peaces" wrote in message
...
SteveBell wrote:
How come they don't make 'em like that anymore?


Same reason they don't make much of *anything* like that anymore.
Stupid consumers want everything absolutely as cheap as possible, and
stupid manufacturers want you to buy a new whatever every couple of
years.

If I had first seen the Hoffco in a store with other brands of similar
prices, I would have thought the Hoffco was of lower quality.

The carburetor lacks a squeeze bulb for cold starting.

It's less powerful than is typical of a large trimmer. (The power is
adequate, and more power may have meant a shorter motor life.)

Its driveshaft is a flexible cable. (The cable has held up fine and may
mean less weight at the head.)

The most important feature is the wide handlebars. I don't know why I
don't see it on other trimmers. I wouldn't try to control a motorcycle or
a manual scythe with my hands as close as the grips on most trimmers. Wide
handlebars allow my to trim along a fence without beating up the line, to
trim close to flowers with confidence, and to cut a wide swath across a
field without fatigue.

The wide handlebar type handles have been available as add-on accessories
and they work on most trimmers. They can be used with a support strap and if
you get everything set up just right it makes trimming a lot easier. I
personally have found that a very light weight trimmer used freehand works
best for me. I have a heavy duty wheeled trimmer for the tough stuff.

Don Young




All times are GMT +1. The time now is 06:21 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter