When buying a specific capacity Window A/C, do you want to buysomething with a high EER , or, low running AMPS ?
 

Ive noticed units that are 115 v. at high EER's (energy efficiency
ratio) such as 10.5 but they draw higher amps . And ive noticed 230
v. units of the same capacity at a lower EER such as 9.5 ... yet they
draw as much as half the running amps that comparable 115 v. units
do. Its my understanding that its amps that spin the electric meter,
so, since i have both 115 and 230 volts available as a power source,
which is going to use the least electricity in the example above ?
thanks.

When buying a specific capacity Window A/C, do you want to buy something with a high EER , or, low running AMPS ?
 

As EXT already stated the watts will probably be very similar.
220 may draw 7.5 amps on two legs where a 110 would draw 15. The
true advantage of running the 220 is the wire size required. Your
bill will be about the same on most units, but a higher seer
number should be a more efficient unit. The better SEER comes
from some variable such as larger coils, more efficient
compressor, or some other factor.

--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)




wrote in message
...
Ive noticed units that are 115 v. at high EER's (energy
efficiency
ratio) such as 10.5 but they draw higher amps . And ive
noticed 230
v. units of the same capacity at a lower EER such as 9.5 ... yet
they
draw as much as half the running amps that comparable 115 v.
units
do. Its my understanding that its amps that spin the electric
meter,
so, since i have both 115 and 230 volts available as a power
source,
which is going to use the least electricity in the example
above ?
thanks.

When buying a specific capacity Window A/C, do you want to buysomething with a high EER , or, low running AMPS ?
 

On Apr 9, 1:09*pm, " wrote:
Ive noticed units that are 115 v. *at high EER's (energy efficiency
ratio) *such as 10.5 but they draw higher amps . *And ive noticed 230
v. units of the same capacity at a lower EER such as 9.5 ... yet they
draw as much as half the running amps that *comparable 115 v. units
do. *Its my understanding that its amps that spin the electric meter,
so, *since i have both 115 and 230 volts available as a power source,
which *is going to use the least electricity in the example above ?
thanks.

Your electric meter is an energy meter...watt-hours (ie kilowatt-
hours)

The way I choose an window a/c unit....I get the unit that has the btu/
hour rating I'm looking for & then the best EER (relative to
price). I also consider the predicted usage....a higher EER will
reduce operating cost but that should be balanced against initial unit
cost.

Assuming both units have similar (identical) btu/hour capacities,
then the unit will use ~ 9.5% less electricity to do the same job.

If you only run the unit 30 days per year & 10 hours per day but it
costs $200 more than the 9.5 EER unit ....depending on your cost per
kilowatt-hr, the payback period could be quite a while and the
cheaper unit might make more sense.

You might save something on the order to $1 per day.

cheers
Bob