water based floor finish
 

Hi - I'm considering using a water-based polyurethane to finish a
newly installed wide pine floor... Mostly to avoid the odor (etc)
from the oil based product. Does anyone have experience with the
water-based product on a pine floor? How well does it stand up? Are
there any major drawbacks?

thanks,

Greg

water based floor finish
 

On Dec 3, 11:20�am, Greg wrote:
Hi - I'm considering using a water-based polyurethane to finish a
newly installed wide pine floor... �Mostly to avoid the odor (etc)
from the oil based product. �Does anyone have experience with the
water-based product on a pine floor? �How well does it stand up? �Are
there any major drawbacks?

thanks,

Greg

if it ever gets wet it will soften a little. for that reason oil based
poly is better, and i believe harder too

water based floor finish
 

On Wed, 3 Dec 2008 09:54:07 -0800 (PST), "
wrote:

On Dec 3, 11:20?am, Greg wrote:
Hi - I'm considering using a water-based polyurethane to finish a
newly installed wide pine floor... ?Mostly to avoid the odor (etc)
from the oil based product. ?Does anyone have experience with the
water-based product on a pine floor? ?How well does it stand up? ?Are
there any major drawbacks?

thanks,

Greg

if it ever gets wet it will soften a little. for that reason oil based
poly is better, and i believe harder too

The waterbased finishes have the advantage of low odor, easy cleanup,
and not flammable. The oil-based finishes are better in the long run,
but you need set up some kind of cross ventilation. "Varathane" is a
very good product for wooden floors.

water based floor finish
 

On Dec 3, 10:20*am, Greg wrote:
Hi - I'm considering using a water-based polyurethane to finish a
newly installed wide pine floor... *Mostly to avoid the odor (etc)
from the oil based product. *Does anyone have experience with the
water-based product on a pine floor? *How well does it stand up? *Are
there any major drawbacks?

thanks,

Greg

A benefit of water base is it wont yellow like oil, so if you want the
lightest natural finish over the years water base is best. Gloss is
clearest in any finish so only use a satin or semi for final coat. Its
probably softer than oil so do an extra coat.

water based floor finish
 

On Dec 3, 10:20*am, Greg wrote:
Hi - I'm considering using a water-based polyurethane to finish a
newly installed wide pine floor... *Mostly to avoid the odor (etc)
from the oil based product. *Does anyone have experience with the
water-based product on a pine floor? *How well does it stand up? *Are
there any major drawbacks?

thanks,

Greg

It all depends what you want to spend. With what can buy at Home
Depot, it's a crap shoot. The $50 / gallon (and up) water bourne
finishes are extremely durable, probably more so than oil based.

JK

water based floor finish
 

Greg,

I've used both on oak floors. The water-based did not stand up well in
the high traffic areas with a big dog, even with four coats. Look at
the small print on the can and it will probably say something about
needing more frequent re-application. I should have re-done it after
six years.

The oil-based does "color" the floor more, but I think it's a more
durable finish. High gloss is tougher than semi or satin. Its been 12
years since I used the water-based so they could be better now. The
oil-based, high gloss I put down two years ago still looks like new.

Of course the dog is gone now.

The water-based should work fine as long as you re-do it more
frequently.

dss