gas fireplace install
i had a direct vent fireplace installed. It was vented via a coaxial vent
pipe (pipe within a larger pipe-fresh comes in through the outer pipe and exhaust vents out the inner pipe). How close can 1) roxul insulation get to the pipe 2) blue foam board get to the pipe and 3) how close can house wrap get to the pipe, if at all. Thanks -- edee em I know the truth is out there but I like to stay in... |
gas fireplace install
"edee_em" wrote in message ... i had a direct vent fireplace installed. It was vented via a coaxial vent pipe (pipe within a larger pipe-fresh comes in through the outer pipe and exhaust vents out the inner pipe). How close can 1) roxul insulation get to the pipe 2) blue foam board get to the pipe and 3) how close can house wrap get to the pipe, if at all. Thanks Seems as though the people making the pipe don't know either. See cop out below. http://www.elitedeals.com/cpf-69457.html Consult the appliance manufacturer's installation instructions for the minimum allowable clearance between the outside of the vent pipe, and the combustible surfaces of the enclosure. I'd certainly want a couple of inches depending on how hot it gets. The blue foam melts at 190 degrees but the pipe should not be getting that hot. |
All times are GMT +1. The time now is 02:09 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter