Stanley tool whatzit
 

Like the second tool on this page

http://tinyurl.com/3km34s

http://images.google.com/imgres?imgu...LG:en%26sa%3DN

--

"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round hole.
When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes out the
other end the length of the opposite end. It looks like a ballpoint pen
but without the writing end sticking out. The rod is solid through the
body. It looks like if you were to put it over a finishing nail, you would
hit the top end, and it would countersink the other end, and insure that
one could not miss. Is that what it is?

Steve

--
"...the man who really counts in the world is the doer, not the mere
critic-the man who actually does the work, even if roughly and
imperfectly, not the man who only talks or writes about how it ought to be
done." Theodore Roosevelt 1891

Stanley tool whatzit
 

SteveB wrote:
I found a Stanley tool someone had given me. It is about three inches long,
and 3/4" in diameter, with a round knurled surface. On one end, there is a
1/8" or so rod projecting. On the other, there is a round hole. When you
press the 1/8" rod on one end, a 3/32 to 1/16" rod comes out the other end
the length of the opposite end. It looks like a ballpoint pen but without
the writing end sticking out. The rod is solid through the body. It looks
like if you were to put it over a finishing nail, you would hit the top end,
and it would countersink the other end, and insure that one could not miss.
Is that what it is?

Yep.

Tony

Stanley tool whatzit
 

"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round hole.
When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes out the
other end the length of the opposite end. It looks like a ballpoint pen
but without the writing end sticking out. The rod is solid through the
body. It looks like if you were to put it over a finishing nail, you would
hit the top end, and it would countersink the other end, and insure that
one could not miss. Is that what it is?

Steve

Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed end, it is
for making a self centered starting hole for hinge screws.

Stanley tool whatzit
 

I found a Stanley tool someone had given me. It is about three inches long,
and 3/4" in diameter, with a round knurled surface. On one end, there is a
1/8" or so rod projecting. On the other, there is a round hole. When you
press the 1/8" rod on one end, a 3/32 to 1/16" rod comes out the other end
the length of the opposite end. It looks like a ballpoint pen but without
the writing end sticking out. The rod is solid through the body. It looks
like if you were to put it over a finishing nail, you would hit the top end,
and it would countersink the other end, and insure that one could not miss.
Is that what it is?

Steve

--
"...the man who really counts in the world is the doer, not the mere
critic-the man who actually does the work, even if roughly and imperfectly,
not the man who only talks or writes about how it ought to be done."
Theodore Roosevelt 1891

Stanley tool whatzit
 

On Sat, 03 May 2008 02:44:37 GMT, "Cliff Hartle"
wrote:

Like the second tool on this page

http://tinyurl.com/3km34s

http://images.google.com/imgres?imgu...LG:en%26sa%3DN

Or down below- "Self-Centering Screw Hole Punch "

BTW- what language is that translated? from?

The nail set is "Designed to eschew marring natalie wood for the time
of habituate"


The screw hole punch is "Self-centering feature film idealistic for
the sake of hinges & catches"

Jim

Stanley tool whatzit
 

I was just looking for a pic and didn't notice the text.

"Won't spoil natalie wood rise"

--

"Jim Elbrecht" wrote in message
...
On Sat, 03 May 2008 02:44:37 GMT, "Cliff Hartle"
wrote:

Like the second tool on this page

http://tinyurl.com/3km34s

http://images.google.com/imgres?imgu...LG:en%26sa%3DN

Or down below- "Self-Centering Screw Hole Punch "

BTW- what language is that translated? from?

The nail set is "Designed to eschew marring natalie wood for the time
of habituate"


The screw hole punch is "Self-centering feature film idealistic for
the sake of hinges & catches"

Jim

Stanley tool whatzit
 

Edwin Pawlowski wrote:
"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round hole.
When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes out the
other end the length of the opposite end. It looks like a ballpoint pen
but without the writing end sticking out. The rod is solid through the
body. It looks like if you were to put it over a finishing nail, you would
hit the top end, and it would countersink the other end, and insure that
one could not miss. Is that what it is?

Steve

Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed end, it is
for making a self centered starting hole for hinge screws.

I forgot about the one for hinge screws, I also FOUND mine.

Tony

Stanley tool whatzit
 

on 5/3/2008 12:52 PM SteveB said the following:
"Cliff Hartle" wrote in message
news:pkQSj.142$Fv.92@trnddc03...

Like the second tool on this page

http://tinyurl.com/3km34s



Definitely it. I said that is what I thought it was. I can sure use this
on bigger finishing nails.

Steve




It can be used on all finishing nails. On small headed ones, the blunt
end will drive the head below the trim surface and make a pocket in the
wood around the small head which will accept the putty.
On larger headed finishing nails, it just drives the head below the trim
surface and the big head hole allows for putty.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Stanley tool whatzit
 

SteveB wrote:
"Tony Miklos" wrote in message
...
Edwin Pawlowski wrote:
"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round
hole. When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes
out the other end the length of the opposite end. It looks like a
ballpoint pen but without the writing end sticking out. The rod is
solid through the body. It looks like if you were to put it over a
finishing nail, you would hit the top end, and it would countersink the
other end, and insure that one could not miss. Is that what it is?

Steve
Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed end, it
is for making a self centered starting hole for hinge screws.
I forgot about the one for hinge screws, I also FOUND mine.

Tony

Finding tools is exciting like getting a Christmas present. Oh, WOW, I
forgot I had this, or Oh that's where I put it.

LOL. Yes, finding tools is like Christmas, but I mean finding tools
that others had lost. Most of my found tools where laying on the road
and I stopped to pick them up. If a tool is accidentally left by
someone I can call, I always call them to let them know. I know how
much it sucks to loose a tool. I've found tools I lost for over ten
years in equipment that I serviced again. Funny how many of us can look
at two identical but worn tools and know which one is ours.

It's true when they say "A man can never have too many tools".

Tony

Stanley tool whatzit
 

"Cliff Hartle" wrote in message
news:pkQSj.142$Fv.92@trnddc03...
Like the second tool on this page

http://tinyurl.com/3km34s


Definitely it. I said that is what I thought it was. I can sure use this
on bigger finishing nails.

Steve

Stanley tool whatzit
 

"Edwin Pawlowski" wrote in message
...

"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round
hole. When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes
out the other end the length of the opposite end. It looks like a
ballpoint pen but without the writing end sticking out. The rod is solid
through the body. It looks like if you were to put it over a finishing
nail, you would hit the top end, and it would countersink the other end,
and insure that one could not miss. Is that what it is?

Steve

Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed end, it
is for making a self centered starting hole for hinge screws.


Blunt end, and looks like it would handle larger finishing nails. Now I
want to go get a smaller one for smaller nails. But then I bought a
pneumatic t nailer, and I don't have to use finishing nails on baseboards
any more.

But I DO need another tool.

Steve

Stanley tool whatzit
 

"Tony Miklos" wrote in message
...
Edwin Pawlowski wrote:
"SteveB" toquerville,utah@zionvistas wrote in message
...
I found a Stanley tool someone had given me. It is about three inches
long, and 3/4" in diameter, with a round knurled surface. On one end,
there is a 1/8" or so rod projecting. On the other, there is a round
hole. When you press the 1/8" rod on one end, a 3/32 to 1/16" rod comes
out the other end the length of the opposite end. It looks like a
ballpoint pen but without the writing end sticking out. The rod is
solid through the body. It looks like if you were to put it over a
finishing nail, you would hit the top end, and it would countersink the
other end, and insure that one could not miss. Is that what it is?

Steve

Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed end, it
is for making a self centered starting hole for hinge screws.

I forgot about the one for hinge screws, I also FOUND mine.

Tony

Finding tools is exciting like getting a Christmas present. Oh, WOW, I
forgot I had this, or Oh that's where I put it.

Steve

Stanley tool whatzit
 

Jim Elbrecht wrote:

BTW- what language is that translated? from?

The nail set is "Designed to eschew marring natalie wood for the time
of habituate"


The screw hole punch is "Self-centering feature film idealistic for
the sake of hinges & catches"


Uh, it's English, but not the kind we normally hear:

----

Dilbert: "I think it's the fuel pump."

Mechanic: "WHAT!?"

Dilbert: "I think it's the )#*!&* fuel pump."

Mechanic: "Well, why didn't you say so!"

Stanley tool whatzit
 

Tony Miklos wrote:

SteveB wrote:

"Tony Miklos" wrote in message
...

Edwin Pawlowski wrote:

"SteveB" toquerville,utah@zionvistas wrote in message
...

I found a Stanley tool someone had given me. It is about three
inches long, and 3/4" in diameter, with a round knurled surface.
On one end, there is a 1/8" or so rod projecting. On the other,
there is a round hole. When you press the 1/8" rod on one end, a
3/32 to 1/16" rod comes out the other end the length of the
opposite end. It looks like a ballpoint pen but without the
writing end sticking out. The rod is solid through the body. It
looks like if you were to put it over a finishing nail, you would
hit the top end, and it would countersink the other end, and insure
that one could not miss. Is that what it is?

Steve

Blunt or sharp?

If it is a blunt end, it is for setting nails. If it is a pointed
end, it is for making a self centered starting hole for hinge screws.

I forgot about the one for hinge screws, I also FOUND mine.

Tony


Finding tools is exciting like getting a Christmas present. Oh, WOW,
I forgot I had this, or Oh that's where I put it.


LOL. Yes, finding tools is like Christmas, but I mean finding tools
that others had lost. Most of my found tools where laying on the road
and I stopped to pick them up. If a tool is accidentally left by
someone I can call, I always call them to let them know. I know how
much it sucks to loose a tool. I've found tools I lost for over ten
years in equipment that I serviced again. Funny how many of us can look
at two identical but worn tools and know which one is ours.

It's true when they say "A man can never have too many tools".

Yes, and also "You can't be too rich or too handsome."

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.98*10^14 fathoms per fortnight.