I posted this before but didn't get a "serious" response.

Anyway, the "new thing" in spray painting seems to be airless high pressure
painting using a positive displacement (piston) pump. The equipment can
be had for from $100 (Big Lots) to $500 or so depending upon quality,
pressure, capacity ...

Anyone here actually use it? Any "war stories?" Is it "worth" the price
and the trouble or what?

EMWTK


** Posted from http://www.teranews.com **

On Apr 21, 1:45*pm, "John Gilmer" wrote:
I posted this before but didn't get a "serious" response.

Anyway, the "new thing" in spray painting seems to be airless high pressure
painting using a positive displacement (piston) pump. * *The equipment can
be had for from $100 (Big Lots) to $500 or so depending upon quality,
pressure, capacity ...

Anyone here actually use it? * Any "war stories?" * *Is it "worth" the price
and the trouble or what?

EMWTK

** Posted fromhttp://www.teranews.com**

"new thing" where have you been, airless is old stuff. 100$ will get
you a headache pump. I have a small Titan with about 400 gallons
through it with no issues, maybe a 900$ pump. If paint is your
business then a sprayer is a tool.

New???? They have been around for over 40 years. I finished painting my
house yesterday with one. They work great that's why professionals use them.
Mine was a bargain at $800.00. Bad prep = bad paint job.

cm


"John Gilmer" wrote in message
...
I posted this before but didn't get a "serious" response.

Anyway, the "new thing" in spray painting seems to be airless high
pressure painting using a positive displacement (piston) pump. The
equipment can be had for from $100 (Big Lots) to $500 or so depending upon
quality, pressure, capacity ...

Anyone here actually use it? Any "war stories?" Is it "worth" the
price and the trouble or what?

EMWTK


** Posted from http://www.teranews.com **

On Apr 21, 2:57 pm, ransley wrote:
On Apr 21, 1:45 pm, "John Gilmer" wrote:

Anyway, the "new thing" in spray painting seems to be airless high pressure
painting using a positive displacement (piston) pump.

If paint is your
business then a sprayer is a tool.

New construction and some exterior, I doubt there's anything better.

If you don't know what you're doing though, you can and very likely
will end up with a: crappy job, and /or a mess (in a hurry, too), and/
or longer or harder work.

A consumer airless unit is probably best for consumers, I think.
Slow, but tough to get in trouble with.
-----

- gpsman