DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Table Saw recommendation needed please. (https://www.diybanter.com/home-repair/243781-table-saw-recommendation-needed-please.html)

S. Barker April 13th 08 05:41 AM

Table Saw recommendation needed please.
 
I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it square.
I have this POS rockwell I paid WAY too much for at an auction, and it just
has to go. The fence is not worth the powder and shot it would take to blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker




Pete C. April 13th 08 05:49 AM

Table Saw recommendation needed please.
 

"S. Barker" wrote:

I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it square.
I have this POS rockwell I paid WAY too much for at an auction, and it just
has to go. The fence is not worth the powder and shot it would take to blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker


I'm mostly a metalworker, but I have one of the Bosch contractor type
portable table saws that I use for the odd woodworking project as well
as stuff like acrylic and UHMW stock, and it does a good job.

Edwin Pawlowski April 13th 08 06:29 AM

Table Saw recommendation needed please.
 

"S. Barker" wrote in message
...
I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it
square.
I have this POS rockwell I paid WAY too much for at an auction, and it
just
has to go. The fence is not worth the powder and shot it would take to
blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?


The fence is the key to wood sawing happiness. Unfortunately, in your price
range you will get mostly mediocrity. A good fence, such as Biesemeyer or
Unifence costs close to your entire budget.

You may want to consider something like this
http://www.grizzly.com/products/10-T...eft-Tilt/G0575
or
http://www.grizzly.com/products/10-T...ase-110V/G0444

Other good brands are Delta and Jet, but the better models are in the $1000
range and up.

Please, avoid the temptation to get a cheap benchtop or an aluminum table
saw for $199 on sale at Sears.



boden April 13th 08 07:20 AM

Table Saw recommendation needed please.
 
Pete C. wrote:

"S. Barker" wrote:

I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it square.
I have this POS rockwell I paid WAY too much for at an auction, and it just
has to go. The fence is not worth the powder and shot it would take to blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker



I'm mostly a metalworker, but I have one of the Bosch contractor type
portable table saws that I use for the odd woodworking project as well
as stuff like acrylic and UHMW stock, and it does a good job.


I don't know anything about your saw, but if the saw itself is adequate
and the fence is lousy you might want to consider just replacing the
fence. I have a Delta contractor's saw that I bought 15 to 20 years
ago. The fence was useless. I added a Delta Unifence (there may be
better fences today) and added a Uni-T fence to it.
I can set this fence with an accuracy & precision of less than 1/128"

http://www.ptreeusa.com/uni_t_fence.htm

I'd guess that I have $350-450 invested in my fence but it was worth it.

Boden

Phisherman April 13th 08 01:17 PM

Table Saw recommendation needed please.
 
On Sat, 12 Apr 2008 22:41:32 -0500, "S. Barker"
wrote:

I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it square.
I have this POS rockwell I paid WAY too much for at an auction, and it just
has to go. The fence is not worth the powder and shot it would take to blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker



A cabinet saw for $450? I'd say "avoid that one!" But for $450 you
can get a good fence for your Rockwell.

cm April 13th 08 02:27 PM

Table Saw recommendation needed please.
 
I think if you will go up to $500.00 you could get a Jet contractors saw
with a great fence. I just sold mine after 8 years of trouble free service.
The only reason I sold is I bought a Delta Unisaw real cheap. I also just
got a Robland X31 combination machine on Craigslist real cheap. If I like
the X31 I'll sell the Delta Unisaw. Keep looking on Craigs list for a used
Delta or Jet with a good fence.

Good luck,

cm


"S. Barker" wrote in message
...
I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it
square.
I have this POS rockwell I paid WAY too much for at an auction, and it
just
has to go. The fence is not worth the powder and shot it would take to
blow
it across the street. Something currently on the market new for $350 -
$450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker






S. Barker April 13th 08 05:54 PM

Table Saw recommendation needed please.
 

"Boden" wrote in message
...

I don't know anything about your saw, but if the saw itself is adequate
and the fence is lousy you might want to consider just replacing the
fence. I have a Delta contractor's saw that I bought 15 to 20 years ago.
The fence was useless. I added a Delta Unifence (there may be better
fences today) and added a Uni-T fence to it.
I can set this fence with an accuracy & precision of less than 1/128"

http://www.ptreeusa.com/uni_t_fence.htm

I'd guess that I have $350-450 invested in my fence but it was worth it.

Boden


Thanks for your reply. I dont' think too much of the saw itself either.
it's a direct drive, spins about a million rpm, and is gutless.

steve



S. Barker April 13th 08 06:00 PM

Table Saw recommendation needed please.
 

"Edwin Pawlowski" wrote in message
...

The fence is the key to wood sawing happiness. Unfortunately, in your
price range you will get mostly mediocrity. A good fence, such as
Biesemeyer or Unifence costs close to your entire budget.

You may want to consider something like this
http://www.grizzly.com/products/10-T...eft-Tilt/G0575
or
http://www.grizzly.com/products/10-T...ase-110V/G0444

Other good brands are Delta and Jet, but the better models are in the
$1000 range and up.

Please, avoid the temptation to get a cheap benchtop or an aluminum table
saw for $199 on sale at Sears.


Thanks for the reply. I definitely will not be going to sears for a table
saw. I remember picking out the saws for a spa cabinet building shop from
ww grainger, but i have no idea which ones they were. They seemed to be
good saws at the time. (15 yr ago)


s




Joe April 13th 08 06:55 PM

Table Saw recommendation needed please.
 
On Apr 12, 11:29*pm, "Edwin Pawlowski" wrote:
"S. Barker" wrote in message

...

I don't need cabinet makers grade. *I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it
square.
I have this POS rockwell I paid WAY too much for at an auction, and it
just
has to go. *The fence is not worth the powder and shot it would take to
blow
it across the street. * Something currently on the market new for $350 -
$450 would be what i will be shopping for.


Any suggestions , or units to avoid?


The fence is the key to wood sawing happiness. *Unfortunately, in your price
range you will get mostly mediocrity. *A good fence, such as Biesemeyer or
Unifence costs close to your entire budget.

You may want to consider something like thishttp://www.grizzly.com/products/10-Table-Saw-1-1-2-HP-Single-Phase-11...
orhttp://www.grizzly.com/products/10-Table-Saw-1-1-2-HP-Single-Phase-11...

Other good brands are Delta and Jet, but the better models are in the $1000
range and up.

Please, avoid the temptation to get a cheap benchtop or an aluminum table
saw for $199 on sale at Sears.


Adding to this:
This Grizzly was highly rated in a recent woodworking magazine article
(sorry, can't come up with a link). Cut & paste this in your browser:
http://www.grizzly.com/products/G1023SL
IIRC, the price was in the $8-900 range and for what it is, seems like
a great buy. If my ancient Delta ever gives up that one is first on my
list.

Joe

HeyBub[_3_] April 13th 08 06:58 PM

Table Saw recommendation needed please.
 
Edwin Pawlowski wrote:

Other good brands are Delta and Jet, but the better models are in the
$1000 range and up.

Please, avoid the temptation to get a cheap benchtop or an aluminum
table saw for $199 on sale at Sears.


Oh bother! I just bought a Ryobi table saw for $99.00 at HD!

Needed a table saw for one project (laminate flooring). Worked swell.

Now I've got a saw for other projects, such as making tomato stakes out of
1x6 boards.



Edwin Pawlowski April 13th 08 08:59 PM

Table Saw recommendation needed please.
 

"HeyBub" wrote in message

Oh bother! I just bought a Ryobi table saw for $99.00 at HD!

Needed a table saw for one project (laminate flooring). Worked swell.

Now I've got a saw for other projects, such as making tomato stakes out of
1x6 boards.


Tomato stakes are about the limit of that saw. If you attempt to do some
furniture, bookcase or bench, you'll curse the first time you try to
accurately crosscut a wide board that does not fit in front of the blade.



HeyBub[_3_] April 13th 08 11:27 PM

Table Saw recommendation needed please.
 
Edwin Pawlowski wrote:
"HeyBub" wrote in message

Oh bother! I just bought a Ryobi table saw for $99.00 at HD!

Needed a table saw for one project (laminate flooring). Worked swell.

Now I've got a saw for other projects, such as making tomato stakes
out of 1x6 boards.


Tomato stakes are about the limit of that saw. If you attempt to do
some furniture, bookcase or bench, you'll curse the first time you
try to accurately crosscut a wide board that does not fit in front of
the blade.


I've already used it for other projects.

I cut up some vinyl guttering so the bits would fit in the trash can.

Worked swell.



C & E April 14th 08 02:42 AM

Table Saw recommendation needed please.
 

"S. Barker" wrote in message
...
I don't need cabinet makers grade. I just want one that is a 10" and has a
fence that doesn't have to be dicked with every dam time to keep it square.
I have this POS rockwell I paid WAY too much for at an auction, and it
just has to go. The fence is not worth the powder and shot it would take
to blow it across the street. Something currently on the market new for
$350 - $450 would be what i will be shopping for.

Any suggestions , or units to avoid?

thanks!

steve barker


Ridgid's TS 2410 (portable contractor type) and the 3650 (now, the 3660)
also received very good reviews. I have owned the later for 3 years and it
cuts through 1.5" cherry with no trouble, using a better blade than the
stock one. The Cummin's traveling tool show is an approved retailer of the
reconditioned machines and I've seen the 3650 in the $450 range thru them.
They also go on sale at Home Depot for $499 several times a year. I haven't
paid attention to the 2410 but I was surprised at how highly rated it was.
Being the 'baby brother' of the two it should be selling in the mid $300
range. As mentioned, the Jet and the Grizz lines are very good saws. Best
of luck to you.



SteveB[_6_] April 14th 08 08:11 AM

Table Saw recommendation needed please.
 

"Edwin Pawlowski" wrote in message
...

"HeyBub" wrote in message

Oh bother! I just bought a Ryobi table saw for $99.00 at HD!

Needed a table saw for one project (laminate flooring). Worked swell.

Now I've got a saw for other projects, such as making tomato stakes out
of 1x6 boards.


Tomato stakes are about the limit of that saw. If you attempt to do some
furniture, bookcase or bench, you'll curse the first time you try to
accurately crosscut a wide board that does not fit in front of the blade.


Agreed. Last summer, I had to put up two screen doors at our cabin and do
some very small light work. So, I bought the $99 Ryobi table saw. I was in
awe at first, never having had a table saw. The things a table saw could do!

Long story short, I quickly outgrew the tool as NOW my projects became
bigger and more complicated. Cutting anything of size on the tiny tippy saw
was an exercise in pucker muscles. Many a time I had the wife out there
helping me support this or that, and we learned about kicks and
idiosyncrasies of a table saw.

Any tool is good for what it is made for. Outside that, it usually sucks
big time. I'm a big fan of overbuying, but at the time the little saw did
its job and a whole lot more little stuff. At times, though, I really do
wish I had gone an extra Franklin or two and gotten a bigger one.
Outgrowing a tool can be costly, painful, and frustrating.

Who knows. Maybe some day.

Steve



cm April 14th 08 03:27 PM

Table Saw recommendation needed please.
 
I find my $99.00 saw works twice as good with a $99.00 blade in it.

cm


"HeyBub" wrote in message
m...
Edwin Pawlowski wrote:
"HeyBub" wrote in message

Oh bother! I just bought a Ryobi table saw for $99.00 at HD!

Needed a table saw for one project (laminate flooring). Worked swell.

Now I've got a saw for other projects, such as making tomato stakes
out of 1x6 boards.


Tomato stakes are about the limit of that saw. If you attempt to do
some furniture, bookcase or bench, you'll curse the first time you
try to accurately crosscut a wide board that does not fit in front of
the blade.


I've already used it for other projects.

I cut up some vinyl guttering so the bits would fit in the trash can.

Worked swell.




S. Barker April 14th 08 05:32 PM

Table Saw recommendation needed please.
 
THANKS!

s

"C & E" wrote in message
...
Ridgid's TS 2410 (portable contractor type) and the 3650 (now, the 3660)
also received very good reviews. I have owned the later for 3 years and
it cuts through 1.5" cherry with no trouble, using a better blade than the
stock one. The Cummin's traveling tool show is an approved retailer of
the reconditioned machines and I've seen the 3650 in the $450 range thru
them. They also go on sale at Home Depot for $499 several times a year. I
haven't paid attention to the 2410 but I was surprised at how highly rated
it was. Being the 'baby brother' of the two it should be selling in the
mid $300 range. As mentioned, the Jet and the Grizz lines are very good
saws. Best of luck to you.




Edwin Pawlowski April 15th 08 04:38 AM

Table Saw recommendation needed please.
 

"CM" wrote in message
...
I find my $99.00 saw works twice as good with a $99.00 blade in it.

cm


Very true. I used the blade that came with my saw and it was OK, but when I
tried a better blade, I was really impressed. I still have the old blade
for when I have to rip a 2 x 4 but I'd never go back to it for real
woodworking.
--
Ed
http://pages.cthome.net/edhome/



cm April 16th 08 03:19 PM

Table Saw recommendation needed please.
 
Ed,

My saw blade comment was a little tongue in cheek..... I do have a cheap
Ryobi table saw that we use for ripping stuff on job sites. I don't think
you could safely or accurately cross cut much of anything on it. In my home
shop I have a 1950's Unisaw and a Robland X31 combo machine to make my
garden stakes and toothpicks on. ;-)

cm


www.vintagetrailersforsale.com


"Edwin Pawlowski" wrote in message
...

"CM" wrote in message
...
I find my $99.00 saw works twice as good with a $99.00 blade in it.

cm


Very true. I used the blade that came with my saw and it was OK, but when
I tried a better blade, I was really impressed. I still have the old
blade for when I have to rip a 2 x 4 but I'd never go back to it for real
woodworking.
--
Ed
http://pages.cthome.net/edhome/





All times are GMT +1. The time now is 09:45 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter