Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.hvac,alt.home.repair
external usenet poster
 
Posts: 1
Default correct thermostat setup

Hi,

We got a new thermostat to replace the old mercury bulb (or whatever's
in there) type. The person who set it up doesn't know if it's right.

The thermostat is a FocusPRO TH5220D.

The outside unit:
TRANE BTB718A 100A1
Compr. Mot. 10.2 44 LRA
O.D. Mot. 1.9 1/8 HP
Regrig 22 2 lbs 4 oz
min CKT 16 amps
CTK BRKR 20 amps
230 V 60 HZ
MFR DATE 3/85

The inside unit:
TRANE BLU055E924B1
Gas fired forced air furnace
115 V 12 Amp 1 PH 60 HZ
55.00 BTU/HR
Air temp MSE 50-80 deg. F.
Max outlet air temp 190 deg. F.

The wires that are hooked up on the thermostat are G W Y R-RC
(R and RC have a connecter joining them). The only other wire, blue,
is not connected to anything.

The wiring matches the diagram (thermostat manual) for a 1H/1C System
with 1 transformer, where wire C - "optional 24VAC common connection"
- is unhooked.

The thermostat system type is set to '0' - 1 heat/1 cool conventional.
Other options are for a heat pump, heat or cool only, and then
2 heat /2 cool conventional, 2 heat/1 cool conventional, and 1 heat/2
cool conventional.

Other settings:
3- Fan Control - set to Gas furnace equipment controls fan in heating.
(Other option is electric furnace controls fan in heating.)
5- Stage 1 Heat Cycle - set to 5, for Gas furnaces with 90%
efficiency. (other options are 90% and electric)
9- Stage 1 Compressor cycle rate - set to 3, recommended for most.
(Other options are1 - 6.)
12- Manual/Auto changeover - set to 1, Auto
changeover-heat/cool/auto/off. (Other options are Manual changeover-
heat/cool/off and Auto changeover only- Auto.
15- Compressor protection - 5 minute compressor off time. (Other
options are 0 - 4.)
Other options are not selectable with system type set to '0' - such as
changeover valve, stage 2 heat cycle, auxilliary heat cycle, emergency
heat cycle, and stage 2 compressor.

Does everything look okay? (Heating and cooling is working...)
Thanks
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Correct position of thermostat for central heating Mike P UK diy 19 October 3rd 07 08:46 PM
Boiler and Thermostat Setup yshaikh01 UK diy 1 January 8th 07 07:10 PM
Correct CT-100 crimping Rick Hughes UK diy 15 October 22nd 06 11:18 AM
Car Battery wiring & setup. Mobile/Setup/Coolbox john UK diy 3 August 7th 05 08:13 PM
Furnace does not follow thermostat setup ??? 'ole Home Repair 3 January 15th 05 09:16 PM


All times are GMT +1. The time now is 12:21 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"