DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start (https://www.diybanter.com/home-repair/234731-sears-craftsman-snow-blower-thrower-9-hp-26-elec-start.html)

daveneedshelp February 22nd 08 02:37 PM

Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start
 
I have this snow blower, Sears Craftsman Snow Blower Thrower 9 HP 26"
Elec Start, but no snow is coming out the chute. Any ideas? Thanks.

S. Barker February 22nd 08 02:52 PM

Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start
 
You're done. Go inside.

s

"daveneedshelp" wrote in message
...
I have this snow blower, Sears Craftsman Snow Blower Thrower 9 HP 26"
Elec Start, but no snow is coming out the chute. Any ideas? Thanks.




[email protected] February 22nd 08 03:56 PM

Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start
 
On Feb 22, 9:37 am, daveneedshelp wrote:
I have this snow blower, Sears Craftsman Snow Blower Thrower 9 HP 26"
Elec Start, but no snow is coming out the chute. Any ideas? Thanks.


Are the augers turning? Hold down the levers and try to look at the
front of the unit. If you can't see - let go and quickly run to the
front of the unit. If not then you need to replace the sheer bolts.
They may look like they are still installed but they will be "sheered"
once you remove them.

Oren[_2_] February 22nd 08 07:05 PM

Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start
 
On Fri, 22 Feb 2008 06:37:46 -0800 (PST), daveneedshelp
wrote:

I have this snow blower, Sears Craftsman Snow Blower Thrower 9 HP 26"
Elec Start, but no snow is coming out the chute. Any ideas? Thanks.


Start the engine and try again!
--
Oren

Bob F February 22nd 08 09:42 PM

Sears Craftsman Snow Blower Thrower 9 HP 26" Elec Start
 

"Oren" wrote in message
...
On Fri, 22 Feb 2008 06:37:46 -0800 (PST), daveneedshelp
wrote:

I have this snow blower, Sears Craftsman Snow Blower Thrower 9 HP 26"
Elec Start, but no snow is coming out the chute. Any ideas? Thanks.


Start the engine and try again!


"What's that noise!!"




All times are GMT +1. The time now is 03:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter