Shower surround kits/Again..
 

I've all but completly torn out my old tub/shower and have found a
(shower only) model from Sterling ( at lowes) that I like. It has a
center drain but my bath has a left hand drain.

Is it very hard to relocate a drain? Also, I have a window in the upper
middle of the shower wall. Is it very hard to modify these kits. You
have to cut them to get the shower head etc through, so I imagine there
is a way to modify them without damage to the entire wall piece..?

A problem I can see would be most of these kits push out from the where
they connect. That is , they connect at the top flush with the studs but
push out from the wall below there to make them more flush with
surrounding dry wall or tile..

So, if I cut for the middle of the wall window, I will have to fill in
below that area and some how glue the thing around the window.. ?

TIA
CP

Shower surround kits/Again..
 

Charles Pisano wrote:
I've all but completly torn out my old tub/shower and have found a
(shower only) model from Sterling ( at lowes) that I like. It has a
center drain but my bath has a left hand drain.

Is it very hard to relocate a drain? Also, I have a window in the upper
middle of the shower wall. Is it very hard to modify these kits. You
have to cut them to get the shower head etc through, so I imagine there
is a way to modify them without damage to the entire wall piece..?

A problem I can see would be most of these kits push out from the where
they connect. That is , they connect at the top flush with the studs but
push out from the wall below there to make them more flush with
surrounding dry wall or tile..

So, if I cut for the middle of the wall window, I will have to fill in
below that area and some how glue the thing around the window.. ?

Windows in and around showers and tubs are always a bad design. Few
ever go more than a dozen years without structural problems like rot
and mold cropping up. Your best recourse is to get a comprehensive
design and plan and not attempt a hack job on a piece of plumbing you
found in a box store. Besides a professional architect (probably your
best and eventually cheapest choice) there are design programs
available at bath specialty stores to get everything coordinated. You
need a lot more help than you can find in a newsgroup, but that
shouldn't discourage you from doing the project. God luck.

Joe

TIA
CP

Shower surround kits/Again..
 

Thanks

I agree that it's not a god design. I plan on selling this house
soon, so I'm going as inexpensively as possible. I finally called the
manufacuturerer (sterling) and they said they have window kits. So I
guess I'll give that a shot.

I've got the demolition almost done. There was some blown in insulation
up against that same CBS (exterior-windowed) wall that has furring
strips. Do I need to replace this insulation? It doesn't seem like the
amount that's there is accomplishing much. And I'm in wam climate..

Shower surround kits/Again..
 

On Jan 23, 5:58*am, (Charles Pisano) wrote:
Thanks

I agree that it's not a god *design. * I plan on selling this house
soon, so I'm going as inexpensively as possible. I *finally called the
manufacuturerer (sterling) and they said they have window kits. So I
guess I'll give that a shot.

I've got the demolition *almost done. There was some blown in insulation
up against that same CBS (exterior-windowed) wall that has furring
strips. Do I need to replace this insulation? It doesn't seem like the
amount that's there is accomplishing much. And I'm in wam climate..

If you opt for replacing the insulation, go with something that's
water proof, like extruded polystyrene foam board. HTH

Joe