Furnace igniter clicking all the time
 

My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

Furnace igniter clicking all the time
 

On Dec 28, 3:00*pm, wrote:
My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

Why not just call a pro, you obviously have not had it serviced and
have no idea of other issues.

Furnace igniter clicking all the time
 

On Dec 28, 1:15 pm, ransley wrote:
On Dec 28, 3:00 pm, wrote:

My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

Why not just call a pro, you obviously have not had it serviced and
have no idea of other issues.

It was serviced under a year ago, which negates your assumption, but
thanks for your generalized suggestion.

Furnace igniter clicking all the time
 

wrote:
My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

Normally when the pilot is lit the flame will cancel out the igniter.

Do you have any info on the furnace, or make of controls like model number?

This is something that you may want a HVAC tech look at because it may cause
you problems down the road.
--
Moe Jones
HVAC Service Technician
Energy Equalizers Inc.
Houston, Texas
www.EnergyEqualizers.com

We Sell Lead Free A/Cs :)

Furnace igniter clicking all the time
 

On Dec 28, 3:00*pm, wrote:
My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

It depends upon the model of the furnace. Some older furnaces use a
stand alone ignition module that uses the ignitor probe to sense the
pilot flame. If the sensor is oxidized, or the module is defective or
not grounded well, then the ignitor will never stop sparking, whether
or not a pilot flame is present. The gas valve on this system senses
the pilot independently via a thermocouple mounted in the pilot burner
assembly. Because the valve has a different pilot flame sensor it will
go ahead and operate normally even when the ignitor fails to sense the
pilot flame.

If this is the type of system that you have, then there is no danger
in running it, but IF IT ISN"T, then you have a potentially serious
issue with a control board or control circuit. The furnace could
literally level the structure to the ground if the main valve is
opening without a pilot established first. Best to have it checked by
a qualified technician.

Furnace igniter clicking all the time
 

On Sat, 29 Dec 2007 20:32:26 -0800 (PST), hvacrmedic
wrote:

On Dec 28, 3:00*pm, wrote:
My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Thanks
Mark

It depends upon the model of the furnace. Some older furnaces use a
stand alone ignition module that uses the ignitor probe to sense the
pilot flame. If the sensor is oxidized, or the module is defective or
not grounded well, then the ignitor will never stop sparking, whether
or not a pilot flame is present. The gas valve on this system senses
the pilot independently via a thermocouple mounted in the pilot burner
assembly. Because the valve has a different pilot flame sensor it will
go ahead and operate normally even when the ignitor fails to sense the
pilot flame.

If this is the type of system that you have, then there is no danger
in running it, but IF IT ISN"T, then you have a potentially serious
issue with a control board or control circuit. The furnace could
literally level the structure to the ground if the main valve is
opening without a pilot established first. Best to have it checked by
a qualified technician.

try cleaning the thermocouple, or replacing it. The control board
cannot sense is not getting enough voltage and therefore, always
trying to light the pilot.

Are you sure it is the ignitor clicking, and not the main gas valve
trying to turn on? That sounds like a click also.
My funace, the ignitor is more of a 'tick' in rapid succession, to
light the pilot. When it calls for main gas valve, I can hear a
'click' for the main gas valve.

samurai.

Furnace igniter clicking all the time
 

On Dec 28, 3:00 pm, wrote:
My gas furnace seems to be working well. It heats when it should and
shuts off when it should. The trouble is that the igniter clicks all
the time. This happens whether or not the gas is on. Any suggestions
as to what is happening would be greatly appreciated.

Do you have an electronic air cleaner? They click whenever they "zap" dust.

Furnace igniter clicking all the time
 

replying to mslepski, Jt wrote:
Yeah my boiler keeps arcing to on the pilot but won't flame up the boulevard.
Keep sparking to as the igniter with the pilot on but won't flame

--
for full context, visit https://www.homeownershub.com/mainte...me-277687-.htm

Furnace igniter clicking all the time
 

"Jt" m wrote in message
...
replying to mslepski, Jt wrote:
Yeah my boiler keeps arcing to on the pilot but won't flame up the
boulevard.
Keep sparking to as the igniter with the pilot on but won't flame

--
for full context, visit
https://www.homeownershub.com/mainte...me-277687-.htm
11 year old post. mslepski survived and bought a new furnace years ago.