DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Painting Chrome Oven Drip Pans (https://www.diybanter.com/home-repair/215942-painting-chrome-oven-drip-pans.html)

Jeffy3 September 28th 07 08:19 PM

Painting Chrome Oven Drip Pans
 
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


JoeSpareBedroom September 28th 07 08:32 PM

Painting Chrome Oven Drip Pans
 
"Jeffy3" wrote in message
ps.com...
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not paint. I
think your paint job will last about 20 minutes.



Edwin Pawlowski September 28th 07 08:43 PM

Painting Chrome Oven Drip Pans
 

"JoeSpareBedroom" wrote in message

The colored ones I've seen for sale have a porcelain coating, not paint. I
think your paint job will last about 20 minutes.


If you use high temperature grill paint, you may get 30 minutes.



Oren September 28th 07 08:44 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 19:32:28 GMT, "JoeSpareBedroom"
wrote:

"Jeffy3" wrote in message
ups.com...
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not paint. I
think your paint job will last about 20 minutes.


There are "stove paints" that withstand temp to 1200* . I don't think
they are for food contact surfaces.

--
Oren

"I don't have anything against work. I just figure, why deprive somebody who really loves it."

Jeff Wisnia September 28th 07 08:48 PM

Painting Chrome Oven Drip Pans
 
JoeSpareBedroom wrote:

"Jeffy3" wrote in message
ps.com...

Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.



The colored ones I've seen for sale have a porcelain coating, not paint. I
think your paint job will last about 20 minutes.




Just a thought.... Don't they sell "high temperature" paints for things
like barbeque grills and engine exhaust manifolds?

I don't know the specs on those, but they might just take the heat at
those locations.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


willshak September 28th 07 08:56 PM

Painting Chrome Oven Drip Pans
 
on 9/28/2007 3:48 PM Jeff Wisnia said the following:
JoeSpareBedroom wrote:

"Jeffy3" wrote in message
ps.com...

Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.



The colored ones I've seen for sale have a porcelain coating, not
paint. I think your paint job will last about 20 minutes.



Just a thought.... Don't they sell "high temperature" paints for
things like barbeque grills and engine exhaust manifolds?

I don't know the specs on those, but they might just take the heat at
those locations.

Jeff


Dupli-Color makes a high heat manifold paint. It says on the can it's
good to 1200º. I painted my entire cat back dual exhaust system 2
months ago. Still black and no rust, but it's not on the manifold.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Dave Bugg September 28th 07 09:06 PM

Painting Chrome Oven Drip Pans
 
Oren wrote:
On Fri, 28 Sep 2007 19:32:28 GMT, "JoeSpareBedroom"
wrote:

"Jeffy3" wrote in message
ps.com...
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not
paint. I think your paint job will last about 20 minutes.


There are "stove paints" that withstand temp to 1200* . I don't think
they are for food contact surfaces.


He'll be ok then; the food won't ever contact it.

--
Dave
www.davebbq.com



JoeSpareBedroom September 28th 07 09:10 PM

Painting Chrome Oven Drip Pans
 
"Dave Bugg" wrote in message
...
Oren wrote:
On Fri, 28 Sep 2007 19:32:28 GMT, "JoeSpareBedroom"
wrote:

"Jeffy3" wrote in message
ps.com...
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not
paint. I think your paint job will last about 20 minutes.


There are "stove paints" that withstand temp to 1200* . I don't think
they are for food contact surfaces.


He'll be ok then; the food won't ever contact it.

--
Dave



I wonder if the paint will be able to endure the kind of scrubbing that's
usually needed to clean drip pans.



willshak September 28th 07 09:16 PM

Painting Chrome Oven Drip Pans
 
on 9/28/2007 4:10 PM JoeSpareBedroom said the following:
"Dave Bugg" wrote in message
...

Oren wrote:

On Fri, 28 Sep 2007 19:32:28 GMT, "JoeSpareBedroom"
wrote:


"Jeffy3" wrote in message
ps.com...

Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not
paint. I think your paint job will last about 20 minutes.


There are "stove paints" that withstand temp to 1200* . I don't think
they are for food contact surfaces.

He'll be ok then; the food won't ever contact it.

--
Dave



I wonder if the paint will be able to endure the kind of scrubbing that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Oren September 28th 07 09:27 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 13:06:48 -0700, "Dave Bugg"
wrote:

There are "stove paints" that withstand temp to 1200* . I don't think
they are for food contact surfaces.


He'll be ok then; the food won't ever contact it.


Drippings from the pan makes some goooood gravy.

--
Oren

...through the use of electrical or duct tape, achieve the configuration in the photo..

Oren September 28th 07 09:46 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:

He'll be ok then; the food won't ever contact it.



I wonder if the paint will be able to endure the kind of scrubbing that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)


Nope! re-"Chrome" the originals :)

--
Oren

"Well, it doesn't happen all the time, but when it happens, it happens constantly."

JoeSpareBedroom September 28th 07 09:54 PM

Painting Chrome Oven Drip Pans
 
"Oren" wrote in message
...
On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:

He'll be ok then; the food won't ever contact it.


I wonder if the paint will be able to endure the kind of scrubbing
that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)


Nope! re-"Chrome" the originals :)
Oren



This discussion's got me thinking that the face of my favorite hammer is all
dinged from hitting the nails. I wonder where I can get it refinished.



Oren September 28th 07 10:15 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 20:54:20 GMT, "JoeSpareBedroom"
wrote:

"Oren" wrote in message
.. .
On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:

He'll be ok then; the food won't ever contact it.


I wonder if the paint will be able to endure the kind of scrubbing
that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)


Nope! re-"Chrome" the originals :)
Oren



This discussion's got me thinking that the face of my favorite hammer is all
dinged from hitting the nails. I wonder where I can get it refinished.


Good luck. I have a couple of hammer heads without handles.



--
Oren

"Well, it doesn't happen all the time, but when it happens, it happens constantly."

Jeff Wisnia September 28th 07 10:19 PM

Painting Chrome Oven Drip Pans
 
JoeSpareBedroom wrote:
"Oren" wrote in message
...

On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:


He'll be ok then; the food won't ever contact it.


I wonder if the paint will be able to endure the kind of scrubbing
that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)


Nope! re-"Chrome" the originals :)
Oren




This discussion's got me thinking that the face of my favorite hammer is all
dinged from hitting the nails. I wonder where I can get it refinished.



I get the gag, but just in case some of us here don't know this....

Rub your hammer's face on a concrete surface occassionally so it gets
slightly roughened.

That's what I was tought eons ago. The rougher surface helps prevent
nails bending if you get a little sloppy about not striking them dead
on. They don't skid on the hammer face as much as they do when it's
glassy smooth.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


willshak September 28th 07 10:25 PM

Painting Chrome Oven Drip Pans
 
on 9/28/2007 4:46 PM Oren said the following:
On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:


He'll be ok then; the food won't ever contact it.

I wonder if the paint will be able to endure the kind of scrubbing that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)


Nope! re-"Chrome" the originals :)


Good luck finding a re-chromer. The EPA has so many regs about the
chemicals used that only a big shop can afford it.
Unless you live in Orange Co., California, that is. :-)
--
Oren

"Well, it doesn't happen all the time, but when it happens, it happens constantly."



--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

willshak September 28th 07 10:27 PM

Painting Chrome Oven Drip Pans
 
on 9/28/2007 4:54 PM JoeSpareBedroom said the following:
"Oren" wrote in message
...

On Fri, 28 Sep 2007 16:16:44 -0400, willshak
wrote:


He'll be ok then; the food won't ever contact it.

I wonder if the paint will be able to endure the kind of scrubbing
that's
usually needed to clean drip pans.




Just repaint them without scrubbing. :-)

Nope! re-"Chrome" the originals :)
Oren



This discussion's got me thinking that the face of my favorite hammer is all
dinged from hitting the nails. I wonder where I can get it refinished.



One of my framing hammers has a checkered face. Only used on rough
hidden framing. Great on toe-nailing.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Dave Bugg September 28th 07 10:39 PM

Painting Chrome Oven Drip Pans
 
JoeSpareBedroom wrote:
"Dave Bugg" wrote in message
...
Oren wrote:
On Fri, 28 Sep 2007 19:32:28 GMT, "JoeSpareBedroom"
wrote:

"Jeffy3" wrote in message
ps.com...
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of
$40 for a new set of four, was wondering if there is any harm or
danger to
painting them black with high gloss metallic paint or something.


The colored ones I've seen for sale have a porcelain coating, not
paint. I think your paint job will last about 20 minutes.


There are "stove paints" that withstand temp to 1200* . I don't
think they are for food contact surfaces.


He'll be ok then; the food won't ever contact it.

--
Dave



I wonder if the paint will be able to endure the kind of scrubbing
that's usually needed to clean drip pans.


I doubt it. As you mentioned earlier, the colored pans are most often a
porcelain variant which will take the abuse of vigorous cleaning.

--
Dave
www.davebbq.com



Oren September 28th 07 10:47 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 17:25:12 -0400, willshak
wrote:
Nope! re-"Chrome" the originals :)


Good luck finding a re-chromer. The EPA has so many regs about the
chemicals used that only a big shop can afford it.
Unless you live in Orange Co., California, that is. :-)


I even doubt they would chrome oven drip pans, but I did live near an
Orange grove in Florida.

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."

JoeSpareBedroom September 28th 07 10:54 PM

Painting Chrome Oven Drip Pans
 
"Oren" wrote in message
...
On Fri, 28 Sep 2007 17:25:12 -0400, willshak
wrote:
Nope! re-"Chrome" the originals :)


Good luck finding a re-chromer. The EPA has so many regs about the
chemicals used that only a big shop can afford it.
Unless you live in Orange Co., California, that is. :-)


I even doubt they would chrome oven drip pans, but I did live near an
Orange grove in Florida.
Oren



I think oven pans are what - five bucks each at Home Despot? One would have
to be quite the chump to pay to have them rechromed.



Jeff Wisnia September 28th 07 11:38 PM

Painting Chrome Oven Drip Pans
 
Jeffy3 wrote:

Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.



Just in case I didn't understand you correctly, your subject line said
"Oven Drip Pans".

Izzat what you really meant, cause I've never seen chromed pans which go
inside an oven, but I guess they could exist.

Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


Oren September 28th 07 11:39 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 21:54:10 GMT, "JoeSpareBedroom"
wrote:

"Oren" wrote in message
I even doubt they would chrome oven drip pans, but I did live near an
Orange grove in Florida.


I think oven pans are what - five bucks each at Home Despot? One would have
to be quite the chump to pay to have them rechromed.


If I had chrome drip pans I would try to sell them on ebayy.

For five bucks; make sure, the finish is not pinged or damaged.
--
Oren

"If things get any worse, I'll have to ask you to stop helping me."

GWB September 28th 07 11:52 PM

Painting Chrome Oven Drip Pans
 
Wrap em in aluminum foil. G

Oren September 29th 07 12:01 AM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 18:38:59 -0400, Jeff Wisnia
wrote:

Jeffy3 wrote:
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger


Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?

Jeff


Would four cost $40.00?


--
Oren

"If things get any worse, I'll have to ask you to stop helping me."

willshak September 29th 07 12:50 AM

Painting Chrome Oven Drip Pans
 
on 9/28/2007 5:54 PM JoeSpareBedroom said the following:
"Oren" wrote in message
...

On Fri, 28 Sep 2007 17:25:12 -0400, willshak
wrote:

Nope! re-"Chrome" the originals :)


Good luck finding a re-chromer. The EPA has so many regs about the
chemicals used that only a big shop can afford it.
Unless you live in Orange Co., California, that is. :-)

I even doubt they would chrome oven drip pans, but I did live near an
Orange grove in Florida.
Oren



I think oven pans are what - five bucks each at Home Despot? One would have
to be quite the chump to pay to have them rechromed.



I had a Kenmore (Roper) gas range with chrome pans. I never saw any pans
that were not made for electric ranges.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Jeff Wisnia September 29th 07 12:57 AM

Painting Chrome Oven Drip Pans
 
Oren wrote:

On Fri, 28 Sep 2007 18:38:59 -0400, Jeff Wisnia
wrote:


Jeffy3 wrote:

aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger



Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?

Jeff



Would four cost $40.00?


--
Oren

"If things get any worse, I'll have to ask you to stop helping me."



Probably closer to $30.00 in black, if the OP meant "Range drip pans"
like these:

http://tinyurl.com/37h6wx

I can't see why anyone would need FOUR oven drip pans, and can't recall
ever seeing any chromed oven pans anyway.

I think we've just about "saucered and blowed" this thread now, eh?

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


ransley September 29th 07 02:49 AM

Painting Chrome Oven Drip Pans
 
On Sep 28, 6:57 pm, Jeff Wisnia wrote:
Oren wrote:
On Fri, 28 Sep 2007 18:38:59 -0400, Jeff Wisnia
wrote:


Jeffy3 wrote:


aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger


Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?


Jeff


Would four cost $40.00?


--
Oren


"If things get any worse, I'll have to ask you to stop helping me."


Probably closer to $30.00 in black, if the OP meant "Range drip pans"
like these:

http://tinyurl.com/37h6wx

I can't see why anyone would need FOUR oven drip pans, and can't recall
ever seeing any chromed oven pans anyway.

I think we've just about "saucered and blowed" this thread now, eh?

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.- Hide quoted text -

- Show quoted text -


Paint them and you food will be contaminated with the paint fumes


Oren September 29th 07 02:55 AM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 19:57:55 -0400, Jeff Wisnia
wrote:

I think we've just about "saucered and blowed" this thread now, eh?

Jeff


I concede; never having a chrome drip pan!

eh?, huh?, eh?

--
Oren

"equal opportunity, not equal results"

Jeff Wisnia September 29th 07 04:21 AM

Painting Chrome Oven Drip Pans
 
Oren wrote:
On Fri, 28 Sep 2007 19:57:55 -0400, Jeff Wisnia
wrote:


I think we've just about "saucered and blowed" this thread now, eh?

Jeff



I concede; never having a chrome drip pan!

eh?, huh?, eh?

--
Oren

"equal opportunity, not equal results"



If you were questioning the metaphor, it's:

A Midland US expression, I think. "Saucered and blown" (or "sassered and
blowed" or the like) means "ready" or "finished". The basic concept is
that the coffee in the cup is too hot to drink, so one pours some into
the saucer and blows on it until it's cool enough to drink, then pours
it back into the cup.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.98*10^14 fathoms per fortnight.

Kuskokwim September 29th 07 03:03 PM

Painting Chrome Oven Drip Pans
 
On Fri, 28 Sep 2007 12:19:13 -0700, Jeffy3 wrote:

Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four,


I just bought a set of four porcelain ones for about $16.00 at Walmart.

Jeffy3 September 29th 07 05:00 PM

Painting Chrome Oven Drip Pans
 
On Sep 28, 7:57 pm, Jeff Wisnia wrote:
Oren wrote:
On Fri, 28 Sep 2007 18:38:59 -0400, Jeff Wisnia
wrote:


Jeffy3 wrote:


aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger


Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?


Jeff


Would four cost $40.00?


--
Oren


"If things get any worse, I'll have to ask you to stop helping me."


Probably closer to $30.00 in black, if the OP meant "Range drip pans"
like these:

http://tinyurl.com/37h6wx

I can't see why anyone would need FOUR oven drip pans, and can't recall
ever seeing any chromed oven pans anyway.

I think we've just about "saucered and blowed" this thread now, eh?

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.- Hide quoted text -

- Show quoted text -


I am the original (idiot) poster and I did mean the four drip pans on
the stove that surround the gas burner. They do cost anywhere from 5
to $10 a piece and the black porcelain ones are around 7 with shipping.


Jeff Wisnia September 29th 07 08:22 PM

Painting Chrome Oven Drip Pans
 
Jeffy3 wrote:

On Sep 28, 7:57 pm, Jeff Wisnia wrote:

Oren wrote:

On Fri, 28 Sep 2007 18:38:59 -0400, Jeff Wisnia
wrote:


Jeffy3 wrote:


aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger


Were you maybe trying to describe the round pans which go under electric
heating elements on the top of the stove?


Jeff


Would four cost $40.00?


--
Oren


"If things get any worse, I'll have to ask you to stop helping me."


Probably closer to $30.00 in black, if the OP meant "Range drip pans"
like these:

http://tinyurl.com/37h6wx

I can't see why anyone would need FOUR oven drip pans, and can't recall
ever seeing any chromed oven pans anyway.

I think we've just about "saucered and blowed" this thread now, eh?

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.- Hide quoted text -

- Show quoted text -



I am the original (idiot) poster and I did mean the four drip pans on
the stove that surround the gas burner. They do cost anywhere from 5
to $10 a piece and the black porcelain ones are around 7 with shipping.


I refuse to believe that anyone whose name starts with Jeff could
possibly be an idiot.

But I do think that buying the "tailor made" black ones is the way to go.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.98*10^14 fathoms per fortnight.

Oren September 29th 07 08:47 PM

Painting Chrome Oven Drip Pans
 
On Sat, 29 Sep 2007 15:22:28 -0400, Jeff Wisnia
wrote:

Jeffy3 wrote:
I am the original (idiot) poster and I did mean the four drip pans on
the stove that surround the gas burner. They do cost anywhere from 5
to $10 a piece and the black porcelain ones are around 7 with shipping.


I refuse to believe that anyone whose name starts with Jeff could
possibly be an idiot.


Hardhead :)


But I do think that buying the "tailor made" black ones is the way to go.


Yes; given the cost of a spray/porcelain/paint type product, time,
effort and no assurance they will work as stated.

--
Oren

"equal opportunity, not equal results"

beecrofter[_2_] September 29th 07 08:47 PM

Painting Chrome Oven Drip Pans
 
On Sep 28, 3:19 pm, Jeffy3 wrote:
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


Get the old surface completely free of grease and oil with a lye wash
or similar and then give the surface some tooth with wet or dry
sandpaper, Use barbecue black or engine black. If available the satin
finish seems to hold up the best. Warm the surface to about 200 in
the oven before painting and then put them back in the oven to cure
and it should last a good time. You might hav to refinish them sooner
than the porcelain ones but paint is cheap. Holds up well on
motorcycle parts too, never
liked chrome.


Oren September 29th 07 08:56 PM

Painting Chrome Oven Drip Pans
 
On Sat, 29 Sep 2007 12:47:56 -0700, beecrofter
wrote:

On Sep 28, 3:19 pm, Jeffy3 wrote:
Anyone ever done this? We have chrome ones that we keep clean but
are
aging and would like black ones now and before paying upwards of $40
for a new set of four, was wondering if there is any harm or danger
to
painting them black with high gloss metallic paint or something.


Get the old surface completely free of grease and oil with a lye wash
or similar and then give the surface some tooth with wet or dry
sandpaper, Use barbecue black or engine black. If available the satin
finish seems to hold up the best. Warm the surface to about 200 in
the oven before painting and then put them back in the oven to cure
and it should last a good time. You might hav to refinish them sooner
than the porcelain ones but paint is cheap. Holds up well on
motorcycle parts too, never
liked chrome.


So you've painted chrome, with success?

--
Oren

"equal opportunity, not equal results"

JOSEPH ALIZIO JR. January 6th 17 02:14 PM

Painting Chrome Oven Drip Pans
 
replying to JoeSpareBedroom, JOSEPH ALIZIO JR. wrote:
The Topic Is HIGH HEAT PAINT Obviously.
Please Pay Attention From Now On Please.

--
for full context, visit https://www.homeownershub.com/mainte...ns-253900-.htm



Gordon Shumway January 6th 17 03:49 PM

Painting Chrome Oven Drip Pans
 
On Fri, 06 Jan 2017 14:14:01 GMT, JOSEPH ALIZIO JR. m wrote:

replying to JoeSpareBedroom, JOSEPH ALIZIO JR. wrote:
The Topic Is HIGH HEAT PAINT Obviously.
Please Pay Attention From Now On Please.


Don't you know how to tell time? JoeSpareBedroom moved out about a decade ago.

philo January 6th 17 07:24 PM

Painting Chrome Oven Drip Pans
 
On 01/06/2017 08:14 AM, JOSEPH ALIZIO JR. wrote:
replying to JoeSpareBedroom, JOSEPH ALIZIO JR. wrote:
The Topic Is HIGH HEAT PAINT Obviously.
Please Pay Attention From Now On Please.




I would not paint them.

In the likely event the paint would burn off, the particulates would
ruin the food

Since they are inside the oven I really don't see the point in painting
or replacing...but if they really bother you, get new ones.


All times are GMT +1. The time now is 04:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter