sealing concrete
 

I am having concrete poured in a new polebarn in a couple of weeks. I
will be doing auto "tinkering", meaning varius auto fluids will be
leakng on it. What is the best sealer to use, and how soon after the
pour can/should I do this? Thanks, Earl

sealing concrete
 

On Aug 6, 7:34 pm, (big e lewis) wrote:
I am having concrete poured in a new polebarn in a couple of weeks. I
will be doing auto "tinkering", meaning varius auto fluids will be
leakng on it. What is the best sealer to use, and how soon after the
pour can/should I do this? Thanks, Earl


Earl-

I would suggest a vapor barrier under the concrete.

If you're realy serious about painting the floor & wanting it to last

I would use Rustoleum Industrial DTM Epoxy Mastic (9100 System) 2
coats

http://www.rustoleum.com/Product.asp...02&SBL=2&ddis=

here's the tech info on prep & application

http://www.rustoleum.com/tds/9100%20...51_2032990.pdf

I've been using this product on shop, lab & garage floors for 20+
years.

I have been extemely satisfied.

The last garage floor I painted was 5 years old when I prepped &
painted it.

It had some oil spots & some small (larger than harline) cracks. The
stuff's been down for 6 years. Mountain environment, snow, sometimes
tire chains, road ashes. Some cars w/ small oil leaks.

No summer peel off (yet)

So far so good (again) looks like I'll get at least another 10 years
before
I'll need to recoat (not sure it will be needed but to maintain
coating
integrity). With the
second go 'round, the stuff will probably outlast me.

Read the tech info & moisture testing.

cheers
Bob

sealing concrete
 

big e lewis wrote:
I am having concrete poured in a new polebarn in a couple of weeks. I
will be doing auto "tinkering", meaning varius auto fluids will be
leakng on it. What is the best sealer to use, and how soon after the
pour can/should I do this? Thanks, Earl

Typical "sealers" will not help much with your issue.

What will work is a quality real 2 part epoxy made for garages. It may
be a tad expensive for your applicaeion.


--
Joseph Meehan

Dia 's Muire duit

sealing concrete
 

On Aug 6, 9:34 pm, (big e lewis) wrote:
I am having concrete poured in a new polebarn in a couple of weeks. I
will be doing auto "tinkering", meaning varius auto fluids will be
leakng on it. What is the best sealer to use, and how soon after the
pour can/should I do this? Thanks, Earl

Nothing beats a two part epoxy on concrete. Water based ones are Ok,
but solvent based will put more material down on the floor. Sherwin-
Williams has a dandy 2 part solvent based that appears yield more
square feet coverage per $$. HTH

Joe