I am using a solid (catalyzed) stain,
usually I spray these types of coatings on unfinished furniture, but I
need to touch up a 3/4" strip on an existing finished pc. of furniture.
My question is this:
is it possible to brush or roll this precatalyzed solid stain on or does
it have to be sprayed.
the can only came with spraying instructions.

thanx a bunch

On May 29, 5:26 am, "stainer" wrote:
I am using a solid (catalyzed) stain,
usually I spray these types of coatings on unfinished furniture, but I
need to touch up a 3/4" strip on an existing finished pc. of furniture.
My question is this:
is it possible to brush or roll this precatalyzed solid stain on or does
it have to be sprayed.
the can only came with spraying instructions.

You can try, but I doubt the results will be very satisfactory...

I'd make a test before trying it on the real piece...

well, after testing with brushes and rollers and rags.
I have successfully applied the solid stain with a foam pad (brush), 2
coats and looks as if I never touched it up, the customer was grateful
(that means they paid the bill)
and has referred me to family, friends and neighbors.

so anyway "dpb"
the resutls were very satisfactory with a foam brush

"dpb" wrote in message
oups.com...
| On May 29, 5:26 am, "stainer" wrote:
| I am using a solid (catalyzed) stain,
| usually I spray these types of coatings on unfinished furniture, but
I
| need to touch up a 3/4" strip on an existing finished pc. of
furniture.
| My question is this:
| is it possible to brush or roll this precatalyzed solid stain on or
does
| it have to be sprayed.
| the can only came with spraying instructions.
|
| You can try, but I doubt the results will be very satisfactory...
|
| I'd make a test before trying it on the real piece...
|