Electric dryer outlet converter
 

Hi. i recently moved, and the dryer hookup in the basement of the new
place is a "regular" outlet. My dryer has the three heavy gauge copper
wires and a three pronged plug with large and skewed prongs (By now
it's really clear that i have no clue about these things!). The
landlord refuses to install the same sort of outlet that this plug
requires & i can't afford to buy a new dryer. Is there a transformer
or converter that i could use to make this work? i don't use the dryer
very often, but with three children it's a necessity. Thank you in
advance for your help-

Electric dryer outlet converter
 

wrote:
Hi. i recently moved, and the dryer hookup in the basement of the new
place is a "regular" outlet. My dryer has the three heavy gauge copper
wires and a three pronged plug with large and skewed prongs (By now
it's really clear that i have no clue about these things!). The
landlord refuses to install the same sort of outlet that this plug
requires & i can't afford to buy a new dryer. Is there a transformer
or converter that i could use to make this work? i don't use the dryer
very often, but with three children it's a necessity. Thank you in
advance for your help-



http://www.hometips.com/content/receptacle_intro.html

Does the landlord's outlet look like the one on the left?
If so, there is NO converter to adapt your dryer.

The landlord's space may have had provision for
a gas dryer, not the heavy load required by your electric dryer.

Jim

Electric dryer outlet converter
 

Electric dryer outlet converter
 

On Apr 19, 9:32 am, wrote:
Hi. i recently moved, and the dryer hookup in the basement of the new
place is a "regular" outlet. My dryer has the three heavy gauge copper
wires and a three pronged plug with large and skewed prongs (By now
it's really clear that i have no clue about these things!). The
landlord refuses to install the same sort of outlet that this plug
requires & i can't afford to buy a new dryer. Is there a transformer
or converter that i could use to make this work? i don't use the dryer
very often, but with three children it's a necessity. Thank you in
advance for your help-

not legally it cant be converted will your cord reach the panel? if so
you could buy a tombstone style recpt.a 3/4 inchby say 2 inch long
threaded nipple, a 240v 30 a breaker of the brand panel , and 4 feet
10-3 romex.providing the breaker panel isnt recessed back into the
drywall. probabaly less than $50 for material. and should take only a
few minutes for an electrician to hook up. the further away of course
the more wire,materials and labor become involved. and a panel in a
finished room .... well lets say id be looking to make the switch to
gas.

Electric dryer outlet converter
 

If you have a 4-prong 240 volt outlet but a 3-prong 240 volt cord on
your dryer, then you can put a 4-prong cord onto your dryer and it
will work with the existing outlet.

If you have a 120 volt outlet (such as what your washing machine would
plug into), then you can't exacly change the outlet for use by your
240 volt dryer; an electician would need to run a new line from the
breaker and build a complete new circuit and outlet for your dryer.
However, off the record, you can adapt a 240 volt dryer with a 120
volt power cord to plug into a 120 volt outlet, if you know how to
hook up the new cord to your dryer correctly. But just so you know,
your dryer will dry your clothes
reallllllllllllllllllllllllllllllllllly slow.

Electric dryer outlet converter
 

replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.

--
for full context, visit https://www.homeownershub.com/mainte...er-210871-.htm

Electric dryer outlet converter
 

On Wednesday, July 19, 2017 at 5:14:08 PM UTC-5, Sandarlene wrote:
replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.
--


AE went insane last year waiting 9 years for your reply. He ate all 346 of his gerbils and is still spitting up fur in his padded cell at the state mental hospital. It makes for a very soft bed. ヽ(ヅ)ノ

[8~{} Uncle Crazed Monster

Electric dryer outlet converter
 

On Wednesday, July 19, 2017 at 6:14:08 PM UTC-4, Sandarlene wrote:
replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.

--
for full context, visit https://www.homeownershub.com/mainte...er-210871-.htm

Well, he did say it would work very slowly, didn't he? With
no heat, it's going to work very slowly. In other
words, such attempts, which I'm surprised would work at all,
are futile. You can't run a typical 240V dryer off a 120V
circuit.

Electric dryer outlet converter
 

On 7/20/2017 3:30 AM, trader_4 wrote:
On Wednesday, July 19, 2017 at 6:14:08 PM UTC-4, Sandarlene wrote:
replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.

--
for full context, visit https://www.homeownershub.com/mainte...er-210871-.htm

Well, he did say it would work very slowly, didn't he? With
no heat, it's going to work very slowly. In other
words, such attempts, which I'm surprised would work at all,
are futile. You can't run a typical 240V dryer off a 120V
circuit.


Maybe he should turn the plug upside down? Maybe the electricity is
flowing to the wrong side and get plugged up and stuck.

Electric dryer outlet converter
 

You can't run a typical 240V dryer off a 120V
circuit.




so actually if you incorrectly connect a 240 dryer to 120, it might turn but have NO heat

but if you knew what you were doing and hooked it up correctly it would spin AND heat but at 1/4 the power...

that might still be usable in a pinch

m

Electric dryer outlet converter
 

On Thursday, July 20, 2017 at 9:39:02 AM UTC-4, wrote:
You can't run a typical 240V dryer off a 120V
circuit.




so actually if you incorrectly connect a 240 dryer to 120, it might turn but have NO heat

but if you knew what you were doing and hooked it up correctly it would spin AND heat but at 1/4 the power...

that might still be usable in a pinch

m

You're right, and you probably would get a little bit more than 1/4
the heat because the resistance
heating element would be running at a lower temperature and would have a
lower resistance. Like you say, might be usable in an emergency
and if you knew what you were doing. Another
factor is a lot of dryers today have electronic controls and exactly
how that stuff is wired, ie does it still use 120V for the control portion
or does it use 240V, IDK. Some even have fancy ECM motors now I think.

Electric dryer outlet converter
 

On Thu, 20 Jul 2017 00:30:20 -0700 (PDT), trader_4
wrote:

On Wednesday, July 19, 2017 at 6:14:08 PM UTC-4, Sandarlene wrote:
replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.

--
for full context, visit https://www.homeownershub.com/mainte...er-210871-.htm

Well, he did say it would work very slowly, didn't he? With
no heat, it's going to work very slowly. In other
words, such attempts, which I'm surprised would work at all,
are futile. You can't run a typical 240V dryer off a 120V
circuit.

The timer and motor will work on 120v L/N and if he rewired the dryer,
moving one side of the heat over to the neutral it would be warm but
not hot. (600-700w vs the 2400-2800w typical).
If he just tied both line sides together the heating element is zero
watts.

Electric dryer outlet converter
 

Ed Pawlowski posted for all of us...



On 7/20/2017 3:30 AM, trader_4 wrote:
On Wednesday, July 19, 2017 at 6:14:08 PM UTC-4, Sandarlene wrote:
replying to AE Todd, Sandarlene wrote:
I hooked my 240 dryer up with a 12o plug but the heater for the dryer would
not work. Did I hook it up wrong? It ran okay otherwise.

--
for full context, visit https://www.homeownershub.com/mainte...er-210871-.htm

Well, he did say it would work very slowly, didn't he? With
no heat, it's going to work very slowly. In other
words, such attempts, which I'm surprised would work at all,
are futile. You can't run a typical 240V dryer off a 120V
circuit.


Maybe he should turn the plug upside down? Maybe the electricity is
flowing to the wrong side and get plugged up and stuck.

Electric constipation?

--
Tekkie