Electrical Sketch
 

Electrical Sketch

For the ones following the 3-way thread.

http://i19.tinypic.com/2z9ds01.jpg

I just found a free program called TinyCad. It took over an hour to
learn, but it is a snap to use when you get the hang of it.

Because it does not output to jpg I copied and pasted the drawing into
IrfanView to make a jpg.

Electrical Sketch
 

On Mar 8, 5:09 pm, Terry wrote:
Electrical Sketch

For the ones following the 3-way thread.

http://i19.tinypic.com/2z9ds01.jpg

I just found a free program called TinyCad. It took over an hour to
learn, but it is a snap to use when you get the hang of it.

Because it does not output to jpg I copied and pasted the drawing into
IrfanView to make a jpg.

I haven't been following that thread but I know a bit about CAD.
Google's free SketchUp exports to JPG's and it wouldn't have take you
an hour to learn.
It was good of you to go to that trouble to help someone out.

R

Electrical Sketch
 

On Mar 8, 5:23 pm, "RicodJour" wrote:
On Mar 8, 5:09 pm, Terry wrote:

Electrical Sketch

For the ones following the 3-way thread.

http://i19.tinypic.com/2z9ds01.jpg

I just found a free program called TinyCad. It took over an hour to
learn, but it is a snap to use when you get the hang of it.

Because it does not output to jpg I copied and pasted the drawing into
IrfanView to make a jpg.

I haven't been following that thread but I know a bit about CAD.
Google's free SketchUp exports to JPG's and it wouldn't have take you
an hour to learn.
It was good of you to go to that trouble to help someone out.

R


I had a look at Google's Sketchup. I only checked the web page. I
did not download it. What I need is a quick and dirty way to just
place some prefabed electrical symbols on a 2d layout and connect them
with lines. I did not see any electrical symbols in the help text.

TinyCad will do this in minutes now that I have learned how.

Electrical Sketch
 

On 8 Mar 2007 19:48:18 -0800, "Terry" wrote:

On Mar 8, 5:23 pm, "RicodJour" wrote:
On Mar 8, 5:09 pm, Terry wrote:

Electrical Sketch

For the ones following the 3-way thread.

http://i19.tinypic.com/2z9ds01.jpg

I just found a free program called TinyCad. It took over an hour to
learn, but it is a snap to use when you get the hang of it.

Because it does not output to jpg I copied and pasted the drawing into
IrfanView to make a jpg.

I haven't been following that thread but I know a bit about CAD.
Google's free SketchUp exports to JPG's and it wouldn't have take you
an hour to learn.
It was good of you to go to that trouble to help someone out.

R


I had a look at Google's Sketchup. I only checked the web page. I
did not download it. What I need is a quick and dirty way to just
place some prefabed electrical symbols on a 2d layout and connect them
with lines. I did not see any electrical symbols in the help text.

TinyCad will do this in minutes now that I have learned how.


I use paintbrush, You just make a clipart page with the
symbols you want on it, and cut and paste them.