Grout seal on porcelain tub floor
I'm about to seal the grout on a small corner shower floor - small 2x2
porcelain tiles. I'm almost sure the tile installer said it would be OK to seal BOTH grout and tile in shower to insure better water- proofing. Everybody I asked said this is not needed because tile is sealed already. Anybody wan't to add their 2 cents? THANKS |
Grout seal on porcelain tub floor
On Feb 6, 7:36 am, "frk040" wrote:
I'm about to seal the grout on a small corner shower floor - small 2x2 porcelain tiles. I'm almost sure the tile installer said it would be OK to seal BOTH grout and tile in shower to insure better water- proofing. Everybody I asked said this is not needed because tile is sealed already. Anybody wan't to add their 2 cents? THANKS Here's mine 2¢ |
Grout seal on porcelain tub floor
"frk040" wrote in news:1170765363.800316.277650
@a75g2000cwd.googlegroups.com: I'm about to seal the grout on a small corner shower floor - small 2x2 porcelain tiles. I'm almost sure the tile installer said it would be OK to seal BOTH grout and tile in shower to insure better water- proofing. Everybody I asked said this is not needed because tile is sealed already. Anybody wan't to add their 2 cents? THANKS Sealing the tiles may not be "needed", but you might as well. I just finished a house where I carefully sealed only the grout lines in a standard bathtub, then quickly sealed both the tile and grout in a large walk-in shower. These were 18" tiles with 3/8" grout lines. The only difference was the time to do the work. The shower had at least four times as much tile as the tub, but it took only 1/4 as much time. Read the label on your sealer. Some don't change the look of the tile. Test the sealer in on a scrap tile on in a hidden corner. Since you have porcelain tiles, it probably won't matter. Did I mention that you should read the label on the sealer? |
Grout seal on porcelain tub floor
"frk040" wrote in news:1170765363.800316.277650
@a75g2000cwd.googlegroups.com: I'm about to seal the grout on a small corner shower floor - small 2x2 porcelain tiles. I'm almost sure the tile installer said it would be OK to seal BOTH grout and tile in shower to insure better water- proofing. Everybody I asked said this is not needed because tile is sealed already. Anybody wan't to add their 2 cents? THANKS Sealing the tiles may not be "needed", but you might as well. I just finished a house where I carefully sealed only the grout lines in a standard bathtub, then quickly sealed both the tile and grout in a large walk-in shower. These were 18" tiles with 3/8" grout lines. The only difference was the time to do the work. The shower had at least four times as much tile as the tub, but it took only 1/4 as much time. Read the label on your sealer. Some don't change the look of the tile. Test the sealer in on a scrap tile on in a hidden corner. Since you have porcelain tiles, it probably won't matter. Did I mention that you should read the label on the sealer? |
All times are GMT +1. The time now is 08:16 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter