Q spraying contact adhesive
 

I didn't want to buy a sprayer and tank of adhesive to put down laminate for
a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works
in a top shop would be appreciated.
CC

Q spraying contact adhesive
 

On Feb 1, 9:25 pm, "CC" wrote:
I didn't want to buy a sprayer and tank of adhesive to put down laminate for
a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works in a top shop would be appreciated.
CC

I don't fit the last criterion, but for "a" counter top I'd not even
consider the logistics of spraying contact cement -- by the time
you're set up and got it working, you'd be done w/ the roller, and
then you still have cleanup to go. Plus, unless you're building the
cabinet in the shop and have containment of overspray and mist, you've
got to cover everything else and mask the wall behind, etc., to
control the overspray. Just not worth the effort, imo.

What's the incentive to spray instead of roll other than a desire/
curiousity to do so?

Q spraying contact adhesive
 

Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...ler_cover.html

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.


"CC" wrote in message
...
I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works
in a top shop would be appreciated.
CC

Q spraying contact adhesive
 

On Feb 2, 11:35 am, "Cliff Hartle" wrote:
Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...nt_roller_cove...

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.

"CC" wrote in message

...



I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works
in a top shop would be appreciated.
CC- Hide quoted text -

- Show quoted text -

As some one who works in cabinents don,t spray less you have a booth
to contain it and don,t light a match if you enjoy life . Use a roller
much better

Q spraying contact adhesive
 

Cliff Hartle wrote:
Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...ler_cover.html

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.


"CC" wrote in message
...

I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works
in a top shop would be appreciated.
CC






the non-flamable contact cement is made by weldwood at least it use to
be. i bought a gallon from granger about 8 years ago. works ok.

Q spraying contact adhesive
 

On Feb 2, 4:43 pm, jd karnes wrote:
Cliff Hartle wrote:
Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...nt_roller_cove...

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.

"CC" wrote in message
...

I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts from
someone who works
in a top shop would be appreciated.
CC

the non-flamable contact cement is made by weldwood at least it use to
be. i bought a gallon from granger about 8 years ago. works ok.- Hide quoted text -
....

There are several available but as far as I know, MSDS for them all
indicate either active ventilation or respiratory protection. Don't
think any are really highly toxic or carcinogenic, but spraying in
open environment wouldn't be a wise operation, even for the water-
based. (And, as noted before, I can't even imagine the mess to clean
up afterwards.)

Q spraying contact adhesive
 

"dpb" wrote in message
ups.com...
On Feb 1, 9:25 pm, "CC" wrote:
I didn't want to buy a sprayer and tank of adhesive to put down laminate
for
a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts
from
someone who works in a top shop would be appreciated.
CC

I don't fit the last criterion, but for "a" counter top I'd not even
consider the logistics of spraying contact cement -- by the time
you're set up and got it working, you'd be done w/ the roller, and
then you still have cleanup to go. Plus, unless you're building the
cabinet in the shop and have containment of overspray and mist, you've
got to cover everything else and mask the wall behind, etc., to
control the overspray. Just not worth the effort, imo.

What's the incentive to spray instead of roll other than a desire/
curiousity to do so?

I work in a shop building custom closets and we occasionally make tops
and we spray the contact cement with a pressurized bottle of glue and a
spray
gun, We use cardboard to collect the overspray, Have found it to be a good
solution
and not really a lot of waste, but it is expensive and I did not want to put
that
amount of money into something for using at home if a paint type spray gun
would work

cc

Q spraying contact adhesive
 

"jim" wrote in message
oups.com...
On Feb 2, 11:35 am, "Cliff Hartle" wrote:
Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...nt_roller_cove...

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.

"CC" wrote in message

...



I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts
from
someone who works
in a top shop would be appreciated.
CC- Hide quoted text -

- Show quoted text -

As some one who works in cabinents don,t spray less you have a booth
to contain it and don,t light a match if you enjoy life . Use a roller
much better

Thanks jim, as far as fumes, I have plenty of ventilation but was hopeing
for a cheaper
way to spray it on versus using a roller.
CC

Q spraying contact adhesive
 

Thanks for
"jd karnes" wrote in message
news:4P2dnW4rvoYeI17YnZ2dnUVZ_umlnZ2d@wideopenwest .com...
Cliff Hartle wrote:
Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...ler_cover.html

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.


"CC" wrote in message
...

I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts
from someone who works
in a top shop would be appreciated.
CC






the non-flamable contact cement is made by weldwood at least it use to
be. i bought a gallon from granger about 8 years ago. works ok.

Thanks for all the thoughts. I may go ahead and try to use my spray gun,
I'll check with
my local paint supplier and see if they have some advise on a nozzle to try
and see if it works.
have a cheap gun that I haven't used and will advise here how it went.
CC


that I don't use and

Q spraying contact adhesive
 

CC wrote:
Thanks for
"jd karnes" wrote in message
news:4P2dnW4rvoYeI17YnZ2dnUVZ_umlnZ2d@wideopenwest .com...

Cliff Hartle wrote:

Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...ler_cover.html


I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is
well flammable and the nonflammable stuff I think is toxic.


"CC" wrote in message
...

I didn't want to buy a sprayer and tank of adhesive to put down
laminate for a counter top
Has anyone used a quart paint spray gun to apply the contact
adhesive instead of rolling it on
Would the same spray tips work or a larger one be needed.Any
thoughts from someone who works
in a top shop would be appreciated.
CC






the non-flamable contact cement is made by weldwood at least it use
to be. i bought a gallon from granger about 8 years ago. works ok.


Thanks for all the thoughts. I may go ahead and try to use my spray gun,
I'll check with
my local paint supplier and see if they have some advise on a nozzle to
try and see if it works.
have a cheap gun that I haven't used and will advise here how it went.
CC


that I don't use and
i got the tail end on this but when i did a floor with cork a roller was
just find. you must be doing a lot of sq ft to think about a sprayer.

Q spraying contact adhesive
 

"jd karnes" wrote in message
...
CC wrote:
Thanks for
"jd karnes" wrote in message
news:4P2dnW4rvoYeI17YnZ2dnUVZ_umlnZ2d@wideopenwest .com...

Cliff Hartle wrote:

Why don't you want to roll it with some thing like this?

http://www.ravsupply.com/home/rs1/pa...ler_cover.html

I see spraying making quite a mess with a ton of waste.

Also, how are you going to handle the fumes? The flammable stuff is
well flammable and the nonflammable stuff I think is toxic.


"CC" wrote in message
...

I didn't want to buy a sprayer and tank of adhesive to put down
laminate for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts
from someone who works
in a top shop would be appreciated.
CC






the non-flamable contact cement is made by weldwood at least it use to
be. i bought a gallon from granger about 8 years ago. works ok.


Thanks for all the thoughts. I may go ahead and try to use my spray gun,
I'll check with
my local paint supplier and see if they have some advise on a nozzle to
try and see if it works.
have a cheap gun that I haven't used and will advise here how it went.
CC


that I don't use and
i got the tail end on this but when i did a floor with cork a roller was
just find. you must be doing a lot of sq ft to think about a sprayer.

Soon as weather warms up I want to begin making new cabinets and
counter tops for kitchen along two walls, and also make a craft
center for wife with cabinets and counter top in spare bedroom.
I expect to be doing a lot of laminate work for this project.
CC

Q spraying contact adhesive
 

On Sat, 03 Feb 2007 02:45:03 GMT, "CC"
wrote:


I work in a shop building custom closets and we occasionally make tops
and we spray the contact cement with a pressurized bottle of glue and a
spray
gun, We use cardboard to collect the overspray, Have found it to be a good
solution
and not really a lot of waste, but it is expensive and I did not want to put
that
amount of money into something for using at home if a paint type spray gun
would work

cc

If it is only once in a while, maybe you can get them to let you do it
at the shop?